Squarebody Switcharoo, New Trailfinder 2 Chassis for the K10, RC4wd TF2 Tech
Вставка
- Опубліковано 7 сер 2024
- Time or some more Trailfinder2 tech, and taking a look at the new scottsdale body set from rc4wd.com
RC RatRod Kits available exclusively on RCeveryday.com
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink.com/click.php?t...
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX - Авто та транспорт
@rceveryday.... pro tip.....use a lighter to heat the screws before you undo them. Softens the loc tite
Awesome Josh here watching just home from work 5:13 PM Friday yay it’s Friday
That’ll be cool Josh I’d watch for it love to see you driving that square body, well I’ll watch for the next one until then peace and chicken grease 😁🤙🤙😎
Also, shrink RC makes full interior for the little trx4m if you’re interested. Hides the motor and wires , looks great too
I bought the cheapest fusion pro almost 2 years ago and slapped it into my k10 high trail with portals. It can do doughnuts on dry pavement (2wd) my wife makes me hike in the Rocky Mountains (Alberta) and with 3 4000 mah batteries I can hike up hill all day. Doesn’t get hot and has no trouble spinning all four up any hill. It Also has great slow crawl capability. Obviously there are going to be way better motors but it’s better then brushed. It’s cheap and efficient. Eliminates the need for a separate esc and less wiring. Definitely my favourite cheap motor/esc
combo.
I'm putting my new body on a vanquish chassis. I love when the body panels are different colors.
Nice man❤ like playing dress up, keep it scale brother
Congrats on getting, yet another, squarebody! I think a two tone brown with cream colered sides would be awesome! Either way, I'm sure you'll make it look amazing, as always!
King Of Scale!😎👍
You can build a spacer ring to go between the 12mm hex and the rim
Hey there....think you should go tan....desert earth colour with cream sides on ya new rig.....moderate weathering with couple rust patches...but mainly dirty look. Set of cow horns on bonnet...may be something different to put on?
Grabber tyres with rusty cream metal open triangluar spaces wheels too...think like last one you tried on it.
As for back bed...inside bit of scale chequor plate and a long tool chest.....old rusty bucket and couple of beer cans to complete look.....but then put on a cheeky bumper sticker slightly wonky with 2a or vote someone type sticker....
Love the uploads and scale garages.keep it up.
Peace...
We are now selling hardened steering shafts. Direct replacement. Definately more stout.
It might be time to build u a crawler course. But super cool rig and vodeo
I like the wheel wells are wider on the New body, super cool can’t get much of a tire on my limited edition blazer the wheel wells seem really small
I have 4.75 TSL’s on my Limited Blazer, with lift blocks and Teraflex shackles and body lift.
Program box is so worthwhile on the hobbywing..
Regarding wheel nuts. Have you ever shaved a thread or two off the steel side? It will allow the nylock to engage the threads.
Dremel and a drill chuck .spin the drill while grinding them with the Dremel .like a lath ..
10:10 Yeah, I've always thought the Yotas and K44s are just too narrow for the usual lifted style squarebodies, they'd look fine under a factory height, low, tiny tire truck but on those big ol mud tires with the lift? nah. And by the time you've put wider wheels and hubs on, the scrub radius can get so out of wack it looks kinda ridiculous not to mention the tire rub on uncut fenders. Although the wagonwheels, both the RC4WD and the Element ones look pretty good.
That's why I'm going to use some AR44s from an SCX 10.2 under my Suburban build, as that axial based Longbed you did some videos on has exactly the stance I'm lookin' for, that kinda Axle swapped 2500 look. I'd even managed to get ahold of the RC4WD SCX 10 Leaf Spring Chassis and the leaf mounts for the AR44s.
15:18 The Child. ...RC4WD does sell a double tube roll bar for the K10 so they could match, it's black not chrome though. Part number is Z-S0013
20:00 Huh, I hadn't even realized they'd modified the front end so much from the blazer. I thought they'd only made the wheel cutout bigger but they corrected quite a few of the wonky body lines. Neat!
Buuut personally? I'd 100% paint that new one up like Puddin's Short bed Conversion, It's a great color combo and wouldn't need very much weathering to really pop.
I’m thinking about bolting on the 1.9 Ground Hawgs on mine
Did tattoo a butterfly on your hand?
ordered my scottsdale body kit 2 days ago, got it today, nice and early in the morning, was surprised to see a big box, its well packaged and a heavy kit! the body is pretty beefy, no corners cut as far as quality goes. I just wish the 2 types of grills offered was included in the kit rather then being sold separate at $30 or so bucks! 😞
Dang. I didn’t realize it didn’t have both grill options 🤦♂️ I haven’t gotten to start mine yet.
sadly no but glad its available as an upgrade but at $30! I went ahead and spent $91 on CNC machined front and rear bumpers from SSD only to find out it does not fit! 😞 The front one somewhat does but not too great. Since I opened them up, cannot return. Will be listing them on ebay. I will request for RC4WD to start making the machined bumpers they had started in 2016. Now that more will buy the K10, I hope they bring back the aluminum chrome bumpers back! I also hope the grill is made in aluminum as well. With see metal upgrades, it will be one mean looking Chevy. I have some aluminum Ram spot/fog lights, these are vintage and will go very well on the K10, will make a custom bed bar. from aluminum round bar or stainless tube.
Thanks for never selling out. What brand caliper do you use
Oh man, I’m pretty sure I got that at harbor freight lol. It’s been cut and broken for years. I bought a new metal digital one a couple years back but still haven’t switched😂 it was harbor freight’s as well lol
Hey man , do you think a semto 2cyl nitro engine would fit in this?
I have one, they are too bulky still for a rig this size.
@RCeveryday ok ,thanks buddy
Why don’t you like 1.9’s? I only like and use 1.9’s with bigger tires. The smaller tires don’t look good to me on 1.9’s. I think the 1.9’s with big tires look better on the square body’s because they are so wide and lots of fender space.
Oh look. Two deleted comments of mine. I love UA-cam.
Lol. Happens to me also!! Make hime dissappear!!
What is getting deleted? I have nothing in my “held for review” comment section