@@ProNoobRC I am haha, the Baja pros are looking pretty mean on it. Hey I've heard some people say the 2300 pro would fit with more trimming but haven't seen anyone actually do it, in the video you mentioned you didn't think it would fit, do you still feel that way?
man this truck is alot of work to get to the parts u want haha ! very nice build doh watched the hole video they added alot of scale/real on the truck nice to see
Yes! 1180 screws to remove to do anything lol! Every part is blocked by another! Super scale! lol. But I’d say car of the year for scale accessories and detail!
Good looking vehicle.. definitely like the scale details.. I believe the Hobbywing Fusion pro is fatter but shorter.. (thats what she said).. Thanks for the posting the look see panels off video. Cheers
By far but the most scale! The ole trade off lol. I do not recommend this RC if you plan on actually using it in a rough manner. But for scale aspect, nothing can come close.
Yeah IV took mine on one trail, and the 2 speed servo and differential servo have both messed up, think just to much slack in the servo lines but who knows going to dig into it soon. Going with a 2500kv revolver motor.
Yeah the paid for channels ran through it as per contract and dropped it like it’s hot lol. I seen that too! But we just got ours in last week and went at it lightly ao far but we have plans!
How hard was it to set up the rugged radio with all the siftt servos, i want to change mine to the rugged.. was there any end point adjustments needed to make it all work smooth? or just inhibit the AUX for each servo and assign the button to them. Thanks this was a great video for when i tear mine down to put the 1800 Fusion in.
Did you open the axle and shim the rear diff gears? I have noticed some clicking/skipping in mine under power, so I'm not sure if the plastic housing is flexing or if the ring and pinion need to be shimmed. : (
Nice vid. The Radio feels like crap, throwing it away was logical. Drive my rig on 3S and comes to life a bit. But for sure i will swap the motors. Will try a 2100 KV Fusion Pro with mods on the engine bay.
DC 6V Gear Motor High Torque 1:1000 Reduction Gearbox Motor 10/15/20 RPM for Toy Car Intelligent Robot Model Airplane Engine Toys Reduction Motor (6V 15RPM) a.co/d/14Qny3Z
11:53 radio smack 😂lol. Great video.
Nice!… and you are looking healthy, THAT is awesome!!❤
Great video and thanks for all the great details. I just got mine in the mail from Eliminator and I'm stocked!
You in bc!? I seen it getting packed up last week and asked where it was headed lol! Cheers! You’ll love it!
@@ProNoobRC I am haha, the Baja pros are looking pretty mean on it. Hey I've heard some people say the 2300 pro would fit with more trimming but haven't seen anyone actually do it, in the video you mentioned you didn't think it would fit, do you still feel that way?
Mine is on backorder. Can't wait to get it. Looks really awesome.
Eliminator rc Winnipeg has one on the shelf as of 10am today!!
@@ProNoobRC thanks 😊. I don't want to deal with the cancelation process on my order.
Looks amazing
man this truck is alot of work to get to the parts u want haha ! very nice build doh watched the hole video they added alot of scale/real on the truck nice to see
Yes! 1180 screws to remove to do anything lol! Every part is blocked by another! Super scale! lol. But I’d say car of the year for scale accessories and detail!
Rc4wd winch fits perfect on the hole pattern
Nice detailed look inside. 👌
Just got mine today...
I put 2.2 hyrax tires on mine and it's a must have upgrade
Good looking vehicle.. definitely like the scale details..
I believe the Hobbywing Fusion pro is fatter but shorter.. (thats what she said)..
Thanks for the posting the look see panels off video. Cheers
This is the best detailed video I've seen of this rig but by the looks of it the worse rc to work on. Great video!!
By far but the most scale! The ole trade off lol. I do not recommend this RC if you plan on actually using it in a rough manner. But for scale aspect, nothing can come close.
Getting mine next week
We just got a bunch of upgrade parts in! Stay tuned!
Got the rc4wd 1/8 warn winch mount ed
This truck is sick. But the Dombo radios are actually decent. They have some amazing range.
Agreed! The truck is sick but deserves a better radio though. for its options it wasn’t a great choice to have knobs
Yeah IV took mine on one trail, and the 2 speed servo and differential servo have both messed up, think just to much slack in the servo lines but who knows going to dig into it soon. Going with a 2500kv revolver motor.
i get bomber flashbacks from this rig lol
Just did this with the fusion pro. You are correct about it not fitting. I had to run it without the engine cover.
For that steering drag link were you able to find a better one? Wanting to do this to mine.
Super sweet rig! I watched reviews and videos on it for about two weeks and then it fell off the planet. 😂 🤷🏻♂️.
Yeah the paid for channels ran through it as per contract and dropped it like it’s hot lol. I seen that too! But we just got ours in last week and went at it lightly ao far but we have plans!
How hard was it to set up the rugged radio with all the siftt servos, i want to change mine to the rugged.. was there any end point adjustments needed to make it all work smooth? or just inhibit the AUX for each servo and assign the button to them. Thanks this was a great video for when i tear mine down to put the 1800 Fusion in.
Fairly easy but yes some endpoints will need to be set. But really easy to do.
@@ProNoobRC Thanks for the response
Hola, que consigues con ese cambio de motor?
Buen video
Un saludo
Did you open the axle and shim the rear diff gears? I have noticed some clicking/skipping in mine under power, so I'm not sure if the plastic housing is flexing or if the ring and pinion need to be shimmed. : (
None on ours but we didn’t open it up as we plan to swap it out for some AR60s as these axles are great for looks they won’t hold up long term.
Nice vid. The Radio feels like crap, throwing it away was logical. Drive my rig on 3S and comes to life a bit. But for sure i will swap the motors. Will try a 2100 KV Fusion Pro with mods on the engine bay.
Fatter may not fit. Please keep us posted!
What did you use to make the pulleys move on the miller rock racer
Springtail gear box motor off Amazon. The tiny winch gearbox and motor thing they use in the scale winches and such
Can u change the size of the pinion gear?
What motor did you use to turn the engine belt drive?
DC 6V Gear Motor High Torque 1:1000 Reduction Gearbox Motor 10/15/20 RPM for Toy Car Intelligent Robot Model Airplane Engine Toys Reduction Motor (6V 15RPM) a.co/d/14Qny3Z
Great video!! Is it possible to gear down?
Not with the planetary gear box no. But the quick run fusion SE we put in it can crawl super slow now
The Fusion Pro is 2300kv and it and the Fusion SE are the same diameter according to my micrometer.
Well dang! That’s a great deal!
And I lost a few scale points but for my own sanity you can put regular 12mm hexs on it it makes us fat fingerd guys lives easier lol
it’s a switch panel not a sound bar!!
Heck no! Wet sounds bar. Ain’t nobody need a 4 foot wide 96 switch panel lol.
Omg Fusion Pro is 2300 not 2100🙄
Oh no!! 😬
@@ProNoobRCHa ha🤣 Love Your content..!!!👌🏾
This thing looks terrible to work on just saying compared to a axial alot of wrenching to get in there
Horrible to work on!! Lol