Learn These Tips To Sharpen Your Workshop Skills: Woodworking Tip #35
Вставка
- Опубліковано 2 лип 2024
- Woodworking tips and tricks are a great way of saving time, and lowering frustration in the wood shop because some woodworking tools require a degree of expertise to use, like wood routers or even cordless drills. For me, stopping what I am doing to go back and find the correct bit for my drill is a waste of time, so I modified my method of using hook-and-loop to attach bits to the base and use the same technique to attach the bit change wrench on my cordless router; do you work alone in your shop like most of us? another pair of hands is as close as a hand-screw clamp and a 90-degree bracket for helping in dry fitting and assembling wood projects, and I finally found another use for speed squares (aside from a cutting guide for my circular saw) a guide for getting good quality 45-degree angle cuts easily. Lots of good hand tool woodworking tips for the weekend warrior!
********More Workshop Tips Playlist
Colin Knecht's Woodworking Tips:
• Colin Knecht's Woodwor...
Woodworking Tool Tips:
• Woodworking Tool Tips
Workshop Tips and Tricks:
• Workshop Tips and Tricks
************************************
#workshop #workshoptips #woodworkingtools
Public Service Announcement (PSA) - ** Tool Sale **
M-Power Tools Relocation Sale up to 25% off - www.mpower-tools.ca
MAKE SURE TO USE THIS CODE - welcome25
Select your country (top of page) USA, Canada, or Great Britain, and shop away
This sale is during the month of November 2022 only, but check their website to confirm
Read the Full Article on these Workshop Skills Here -
*** Taylor Tools Affiliate Store - lddy.no/18zkg
*** Amazon Affiliate Store - www.amazon.com/shop/woodworkweb
*** Magswitch Affiliate Store - mag-tools.com/discount/COLIN_...
*** Canadian Amazon Affiliate Store - bit.ly/38h1uib
*** T-SHIRTS and Fun Stuff - teespring.com/stores/woodwork...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb - Навчання та стиль
Thank you!!! EXACTLY!!! I commented on another woodworking channel that the speed square is not accurate both because of the tolerance of the angle and how the flange is warped from manufacturing. That UA-cam didn't like it when he wasn't the one giving out advice in the room. LOL.
the difference between a carpenter and a woodworker is a 1/8 of an inch
Trima kasih sharingnya sangat luar biasa👍
You are a "National Treasure". Your lessons and tips are invaluable. Thank so much Dave
Thanks for the great tips Colin 👍😊
Fantastic tips, Colin! Thanks!!! 😃
Stay safe there with your family! 🖖😊
Just love your videos and helpful hints. Keep up the great work?
Thanks for sharing those tips and the make!
Great bunch of tips again Colin!👍👍👍👍👍👍👍👍👍👍😎😎😎😎
Hi can you make a video on ideas to use 8mm plywood? I need some pieces for sleds, and since the board is large I need more ideas for the rest of the board before ordering it cut :)
Thanks for sharing.
Thank you for another interesting and tip/idea filled video 👍🇦🇺
My dad's old hand saws have not been used for decades. Now I have a use. Thanks!!
Nice tips.... Thanks...
Another great video Colin. I've got a Swanson mini square and a ryoba pull saw...I'm going to test that out today.
Those hard-drive magnets are VERY powerful. Now to find a use for the hard-drive disks.
I must test my speedsquares. I have just assumed they're fine because in these days of precision manufacture there seems no reason at all to settle for less that almost perfect accuracy.
I have tested my speedsquares. I have two blue ones, Empire. The small one is aluminium, metric, the larger one American. The yellow one is small, Stanley, American.
For each, I used it on mantfactured sheetgoods to draw a line 90° to the edge. Then, I flipped the square and drew another, matching perfectly.
There are two easy ways to draw a perfect right angle. One is the 3, 4, 5 triangle, but you do need to be able to lay it out.
The other, using a compass, draw a circle. Draw a straight line through the centre, passing through the perimeter.
Through the points where the perimeter and diameter intersect, using the compass, draw arcs on a larger radius than the circle, say equal to the diameter of the circle. The straight line passing through the points where the arcs intersect is at a right angle with the first line.
You can easily construct a compass in the workshop, it doesn't have to be adjustable and dimensions are unimportant.
Great tip for the router! I lose that little wrench regularly.
I use twist ties to attach the wrench to the cord. Easy to do since the wrench usually has a hole in the handle. Very handy because I have three angle grinders, with two sizes of wrench so it's nice to know I have a wrench, and it's the right size.
interesting tips what i did was duct tape a high strength magnet(s) to a cordless drill and am able to attach small variety of bits, straight, phillips , torx, square, etc
*Despite the financial instability all over the world, I’m so excited I’ve been earning $45,000 from my $10,000 investment every 10days and I've been able to furnish my house and office with beautiful wood works like this, I so much love woodwork and carving...*
Quite impressive but HOW!!?😊 I know it's possible, my colleague at work always get 40K every week, I would appreciate if you show me how to go about it.
@@tinareid6379 After I got up to $300k trading with Mrs Angela Mea Isler i bought a new House and I'm now able to send my kids to a better school in the states thanks to her. When someone is straight forward with what he or she is doing people will always speak up for them.
Her good reputation already speaks for her last month i invested over $100,000 with her and I've already made over $250,000 profit.
@@mayaberlinger4861 Oh please, how can someone get to speak with Mrs Angela Mea Isler!!?
@@tinareid6379 You can message her here 👇👇
where do you get those 90 degree braces that you use at 6:40 in the vid
they are exactly what i need but can't find ???
on my little impact driver I epoxied a hard drive magnet to its foot
Unfortunately, the "welcome25" coupon code for M-Power Tools does not work as of November 5, 2022. Rats! 😟
If anybody gets it to work, or finds a coupon code that does work, PLEASE reply to this comment so I will get a notification that the sale is up and running.
Thanks! 🙂
Colin, you're really running out of topics, aren't you?
Why does he giggle so much at nothing funny?