NOW SHE THICC!! Universal Fender Flare + 2" Wheel Spacer Install || Chevy Tracker (Vitara) || DIY

v v v PRODUCT LINKS BELOW v v v
In this episode I walk you through how to install universal fender flares from Amazon or Ebay. I also install 2" wheel spacers to add extra track width.
Use masking tape to hold the flares in the desired location. Using a drill bit slightly larger than your rivets, begin by drilling one hole in one of the top center holes on the flare.. Drill through the flare and just through the sheet metal behind it, careful not to go to deep and risk damaging anything. Install the rivet and move on the next closest mounting location. Check fitment and repeat the process until all flares are installed. Trim excess portions as desired.
Be sure to check out my video on the Rustoleum Turbo paint job I have on this truck!
HELP SUPPORT THE CHANNEL BY BUYING THROUGH MY AFFILIATE LINKS!:
Flares: ebay.us/7bBjHJ
Spacers (need two boxes of 2): amzn.to/2S3GIhZ ***NOTE THIS IS FOR TRACKERS AND 5x5.5 VEHICLES ONLY verify your bolt pattern if you have a different vehicle
Jeep steel front bumper: amzn.to/2QEMC52
Or, try the Jeep header panel and headlight combo too (lots of fab work, see my other video!):
Header Panel:
amzn.to/3pmLq64
Headlights:
amzn.to/3gIoE3m
Turn signals:
amzn.to/2QFa0PT
Light bar:
amzn.to/2YPnpJJ