the only problem with this is, it requires people to log into both SSID and may or may not properly release to the more effective one if you're trying to range extend. Unless you are able to manually connect when you're further away, there needs to be a more dynamic way of doing this. I am trying repeating the same SSID and seeing if both devices can figure it out...
You got a new subscriber pal. Just connected my old ASus RT-NT66 as a repeater. Works fantastic thanks to you mate. Now I’m gonna set it it up as an Access Point with Powerline Adapters. Great speeds already...👍👍👍
Hello Sir. That router is still functional until today? I am planning to buy that router to make our Wifi usage last longer. To replace also our TPLink tl-wr820n.
I'm trying to configure an old RTN12 D1 as a wireless repeater to my main router (Unifi Dream Machine). The RTN12 connects to the UDM's access point but there is no Internet connection. Spent an entire day trying to figure this out.
After configuring it in repeatrer mode atleast 20 times, I alwasy get error 'Parent AP Status: Disconnected' on it home page. While multiple client's connected to parent AP either via network cable or wirelessly are able to access internet without any problem. I have tried assigning IP to RT N12+ both manually and automatically from parent AP. In my case Parent AP is the modem/router connected to my ISP. I have tried resetting the RT N12+ from the configration page and using reset button (30-30-30 method). Can someone please help me?
Hi, I'm getting the below instead of the section at 2:36 minutes. Using an Asus DSL-N16. DSL Line Configuration Annex A Annex B Select which ANNEX mode your DSL service uses. Incorrect settings will prevent connection to your DSL service. Note: Please ensure that the phone cable is connected to the DSL port. If you are not sure which ANNEX mode to use, please contact your ISP for assistance.
Is it a bad idea to buy this new at this point? I need to upgrade my router because it is 100mbps max and I can get 330 ish I can get this one for 40 which is pretty good on the budget.
hi sir can you help me bout sharing printer on windows 10? i did all steps but no printer is displaying on network.. i try the ip address sharing printer but after how many days it says that the printer was remove by the server.
90m2 appartment works really well. In the middle of the apartment and always full wifi signal. I use this with 100mbps connection and it does not limit my connection.
Drop your comments!
the only problem with this is, it requires people to log into both SSID and may or may not properly release to the more effective one if you're trying to range extend. Unless you are able to manually connect when you're further away, there needs to be a more dynamic way of doing this. I am trying repeating the same SSID and seeing if both devices can figure it out...
this may have just saved the life of my old router for a couple more years. very helpful. keep it up!
You got a new subscriber pal. Just connected my old ASus RT-NT66 as a repeater. Works fantastic thanks to you mate. Now I’m gonna set it it up as an Access Point with Powerline Adapters. Great speeds already...👍👍👍
Thanks dude!
This is excellent! Super helpful! It saved the old router's life time!
I think this is the most helpful video I have ever seen man thank you so much... you earned yourself a subscriber
Awesome !! you present so everyone can understand. The Asus makes it easy are the other that set up in this fashion.
Thankyou so much for this video, I could easily set up my Asus router with your instructions 😁😁😁😁😁
Thank you for doing it literally from start to finish. Great video,!
Can you hook into the lan of the AP and get a wired connection from your repeater?
thanks man, your explanation were so clear
thanks again
good job👍
Thanks man
Two Thumbs Up.... Great Job Brother
Unable to connect to the Parent AP...why?
Good, nice idea bro.
Salamat brod
I have same router but there was problem when i connected wifi it showing no internet.
And showing ap router might be turned off.
Thank you, it worked perfectly 🤠
Very well explained. Thank you
Thanks a lot!
I don’t have the repeater mode option and I think my router is newer than this one. Why is that?
Same
Mine either it's RTAC58U and had only wireless and AP mode. Very disappointing, I'm just going to toss it then as I have zero use for it.
@@WaynesTW That’s wack that we have to do that.
Is this possible to wired my router as a repeater?
Yes
thank you!
next topic, smartQoS features of that router.
Mine doesn't have a repeater mode, what other options do I have?
Hello Sir. That router is still functional until today? I am planning to buy that router to make our Wifi usage last longer. To replace also our TPLink tl-wr820n.
When it scans the wifi networks it does not show my home wifi network. It picks up other neighbours networks but not mine. Is there a solution
My asus has no repeater mode, it has a bridge and access point and default but not the repeater mode I have the ASUS RT-AC87U
I'm trying to configure an old RTN12 D1 as a wireless repeater to my main router (Unifi Dream Machine). The RTN12 connects to the UDM's access point but there is no Internet connection. Spent an entire day trying to figure this out.
Hi after installing the wireless router repeater can our device still use back the main wireless router?
After configuring it in repeatrer mode atleast 20 times, I alwasy get error 'Parent AP Status: Disconnected' on it home page. While multiple client's connected to parent AP either via network cable or wirelessly are able to access internet without any problem. I have tried assigning IP to RT N12+ both manually and automatically from parent AP. In my case Parent AP is the modem/router connected to my ISP.
I have tried resetting the RT N12+ from the configration page and using reset button (30-30-30 method).
Can someone please help me?
Did you ever make it work?
@@intermarer9145 It eventually worked.
how did you make it work?
Hi, I'm getting the below instead of the section at 2:36 minutes. Using an Asus DSL-N16.
DSL Line Configuration
Annex A
Annex B
Select which ANNEX mode your DSL service uses. Incorrect settings will prevent connection to your DSL service.
Note: Please ensure that the phone cable is connected to the DSL port. If you are not sure which ANNEX mode to use, please contact your ISP for assistance.
Is it a bad idea to buy this new at this point? I need to upgrade my router because it is 100mbps max and I can get 330 ish I can get this one for 40 which is pretty good on the budget.
hi sir can you help me bout sharing printer on windows 10? i did all steps but no printer is displaying on network.. i try the ip address sharing printer but after how many days it says that the printer was remove by the server.
Hi sir how about the lan if i use it have be an internet or just wireless only.
UNG REPEATER MODE N2 PRNG TETHERING LG PERO MBILIS NMN UNG CONNECTION..ISANG ARAW KU NFIGURE OUT BAGO MAGAMIT ITO LOL
Can I use this without using the Lan?
Yes
Bruh i have a question i am stuck beetween the " RT-N12+ IS CONNECTING TO THE" YOUR MAIN WIFI NAME" can u help me thanks
You know if I can use the rt-ac1200v2 as a repeater?
hy repetear mode works with wpa2 enerprise? pls help
can this wifi update to Aimesh version?
How is the wifi coverage of this router?
90m2 appartment works really well. In the middle of the apartment and always full wifi signal. I use this with 100mbps connection and it does not limit my connection.
I dont have thewre check connection menu please help me
I have the same problem
why not just press wps
What is the username password