Bluetti AC200p for dummies. Power in Power out. What are those cables for? What cables do I need?

Very basics of how the Bluetti AC200p works and the cables that come with it. XT90, XT60, and MC4 solar cables, AC DC 12 volt power.

[@hangao9673]

Highly recommend this solar

[@joparks2509]

Thank you for this simple yet very informative video.

[@OverlandOne]

Thanks for the good information. I have the Bluetti AC200P and I really like it. It is all the power I need in my van. I appreciate your taking the time to show all the input and output plugs and choices.

[@MontenegroNoel]

Really nice vid seeing you wire your van to the buetti was very nice and new to me ! I’m building out a van and that’s something to think about

[@ExpressVanCamper]

Thank you for sharing. I would highly recommend though at the fuse block keeping the colors straight. I would suggest changing the color of the wire at the MaxxAir Fan so as to keep it straight at the fuse panel. At the least, using red or black electrical tape to differentiate the wires. You might always know why you had the Red/Black reversed at the FSP, but others might come along and wouldn't. Otherwise nice setup.

[@sdavis4201]

short,sweet and simple. thanx that's all i needed.

[@sombodydenuccio]

The 4th way is to connect an inverter directly to your car alternator/battery then plug the bluetti power brick into the inverter. Charge while you drive @ about 450 watts )The cigarette adapter is next to useless.

[@doriannegoodmurphy5383]

Thank-you this has helped me.

[@worldcomicsreview354]

When I bought my Bluetti it was the pandemic and they couldn't get parts for their usual brick (with annoying fan), so they sent me a "Fuyuang FY58807000" generic charging brick, which may be findable on Aliexpress etc. It's slower than Bluetti's one, but it's a big lump of steel and can thus heatsink itself, so is silent!

[@MontenegroNoel]

Really cool vid ! Love seeing you hook up your van to the 200p very nice

[@got2go4word]

Thank you so much!

[@MnAnnetteNS]

I have a dummy question. What effects if any does charging your Bluetti have on your Transits batteries????? I have dual batteries and alternators. While driving of course.

[@MrRentgould]

Thank you .

[@Moes_Prep_and_Tech]

You could use one of the 5521 Barrel plugs for the cooler they have adapters on Amazon

[@codyleehanson]

Is there any problem with the wires going from 12awg (Bluetti > XT90) then 10awg (XT90>fuse box)? I’m trying to find an aviation plug that takes 10awg but not sure if necessary

[@diss_counter2713]

Hi. Can you load the box with an 17.8-21V and 6.6 A solar modul in car mode?

[@alialnasri6972]

Question please 🖐: my AC source in ram 1500 is rated at 400W and my solar panels over rooftop tent is 180W X 3. Can i attach both input to the powerstation at same time?

[@stukorth9097]

I wish someone would do a video showing what connector goes in what output/input and what it can be used for. The only thing anyone is interested in is how fast you can kill the AC200

[@Quintpeterson]

what about powering an AC unit ,,,, ( Dometic RTX 2000 , 2000W ,12 volt ) what output should I use ? and what cables

[@taliah7001]

I saw a little bit but I know what I like