Miata 1.8L Forged Engine Build Part 1 Prep
Вставка
- Опубліковано 1 сер 2024
- Miata 1.8L Forged Engine Build Part 1 Prep
Today on RH2RACING we begin the process of building our forged engine. We are at Leroy Engineering in Chardon Ohio to start the build on our forged engine! It's been a long time coming and it's finally time. If you would like to know what it takes to build an engine capable of 500 hp this is the video series to watch. This is a very in-depth look at engine building and may not be for everyone. We go over specs and measurements as well as tips and tricks to make sure that your engine will perform at it's best. This isn't a "throw it together" build. This motor is built strong and ready for boost. That part of the build will be coming up soon. So sit back and enjoy. This will be a 4-5 part series from bare block to finished motor. We also have a video that will be just a time lapse to quickly highlight the build if that is more your style.
Thanks for watching!
If you want to inquire about a forged engine or other Miata mx5 parts and services :
Leroy Engineering page:
leroyengineering.com/pages/mi...
#miata #mx5 #forgedengine #wisecopistons #manleyrods #arpheadstuds #aclracebearings #500hp - Авто та транспорт
love how thorough you are
Learned more watching this than my engines class in trade school, Great vid
this is the exact type of vids i like
This is great detail. Keep it goin!
KEEP IT UP!
Very good stuff 👍thanks for the knowledge
awesome vid
Keep up the great work tho i fux with it
Nice
5 stars
sweet
I’m spending twice the amount, for half the horsepower, but it will be NA! Which in my opinion is more fun 🤓 your video is very informative!! Cheers happy boosting !!!
I'm considering doing the same.
wavey 🖖
I know barely anything about actually building a car, but if you can teach me like this I’ll work for you full time with low wages.
What is the hp and torque that would be expected from a built 1.8?
🥶
Do you have more like this 1?
Instead of a micrometer could you use a quality digital caliper?
how much would you charge for a fully built 1.8l? and where are you guys located
😻
😎😎😎😎
😍😍😍😍😍😍😍😍😍
is there a kit you can buy with all these parts together or how do you go about getting everything you need to build the engine?
Not that I know of. Not that has everything but contact Leroy Engineering in Chardon Ohio and see what they can do for you. Tell them that Rick at RH2RACING sent you! Thanks for watching!
I just subbed to u
Can I ask how you removed all the round oil stoppers from the block? The golden ones on the sides and the small one which he puts back on with the hammer. Thank you!!
I think that was done at the machine shop as part of all their work
what’s the cost
how much would it cost for you to do this build but with aftermarket cams, crank and oil pump
Not sure. Contact Jonathon at Leroy Engineering for more details. Www.leroyengineering.com
how did this just pop up on my feed?
THANKS UA-cam! 😱
🤑🤑
Who does ur marketing?
You commented on the oil pump being a requirement to be replaced. Is it that important? I ask because I'm building a 1.6 .
Are the stock oil pumps that bad?
I am sorry but Rick has passed away. But I will have his son reach out. This is his Wife.
@@rh2racing
Omg. I'm so sorry to hear that. May God bless you
😼
Why stock crank? Is it boost capable even with 200,000 miles?
BP engines had forged cranks from the factory, and making the planned 200-300 HP (for this motor) is effortless for them. If you're looking for 400+, then we might start looking at aftermarket cranks.
Derek Rockwell (AKA Miata Turbskie)) is running 1000+HP on a stock BP crank lol
How much did this project cost?
I'm up to about 5k right now. A lot of little parts on top on the expensive parts lol. Just the rods and pistons were $1000
🤷♂️
Hey what city are you from? Do you live by Nevada?
No we are in WV
🤔
lol where did this come from
its alright not really my thing
uhhhh 🧐
🤧
haha