Great work. I usually don't like these bobber projects because they usually look half-baked. People just grab any old cruiser and start to chop things off and cover up nice high quality factory paint with some cheap flat black spray can crap. But this has a nice original look to it. I also like how the bike you started with was worn out and needed to be redone anyway. Way too many nice usable bikes get chopped up way too soon. Nice project.
Sorry for the delay. I used VHT range of paints for the frame (and the engine) including a self etch primer, primer, topcoat and clear. It really needs baking to harden off properly which I couldn't do so it remained delicate for ages.
Great work. I usually don't like these bobber projects because they usually look half-baked. People just grab any old cruiser and start to chop things off and cover up nice high quality factory paint with some cheap flat black spray can crap. But this has a nice original look to it. I also like how the bike you started with was worn out and needed to be redone anyway. Way too many nice usable bikes get chopped up way too soon. Nice project.
Thanks for that 😊
how'd you get the sanding scratches off the engine? I'm trying to make mine shine again lol
@4am170 just have to keep at it with progressively finer sandpaper then Autosol polish. Loads of how-to videos on UA-cam. Good luck, just keep at it!
Where did you buy exhost pipes? Any link?
Bought from ebay. The ones I had are no longer listed but these seem to be exactly the same 224362333539
I want to do this, just dont know where to get parts
Most of the custom parts were from ebay
👏✨👏✨👏✨👏🤓
Looks great. What kind of paint did you use to paint frame?
Sorry for the delay. I used VHT range of paints for the frame (and the engine) including a self etch primer, primer, topcoat and clear. It really needs baking to harden off properly which I couldn't do so it remained delicate for ages.
@@peterthomas7203 Thanks for the info, great work
What mk means?
Sorry for the delay, it's short for mark, as in mark1, mark2 meaning g version 1 or 2 😊
What welder did you use to weld the caps on the frame?
Sorry for the delay, just a cheap flux core welder (sometimes called a gasless MIG)
Cheers