Uffda. IMPORTANT!!!!! Diodes must be connected from the opamp input pin to +15V power and -15V power. This is to protect the opamp. There will be a drawing on my website. www.la6nca.net/homebrew/tubtester/index.htm
A separate web site for this valve tester would be very helpful. The English speaking voice is OK and so are the subtitles. Nice project. Music was a bonus. Many thanks. Best wishes.
Excellent work Helge! That's quite a neat tube tester. To be honest, I prefer when you speak Norwegian and translate your script into English subtitles, but the synthesized voice was surprisingly good!
You have some really good episodes. I always enjoy them. Especially the old WW2 equipment from Germany. I'd like to see more of the RV and G-Wagon in ham radio videos 👍.
I’ll definitely undertake this project when details of the schematic are available. It’s so much better for amateur use compared to factory tube testers that were used by technicians when they had to fix tube equipment in batches and wanted to save every minute of their tedious work.
What a great idea for testing a wide variety of tubes with a minimal outlay of cash are you happy for the viewers of your channel to copy the schematic to build their own version of the circuit. Another great project from you.
Same, prefer closed captions & listening to Norwegian. Or, dub your English over video, it's good enough. This voice doesn't know basic pronunciations. Cool vintage tubes!
Excellent project, well done for putting it all together. Another piece of test gear to think about building! English voice is okay, but you sound better.
Thats fantastic!! I 100% plan on doing this... I have built a few tube amps and preamps, but am not 100% sure of the BOM.. would you happen to have any thing already written down??
The english speaking is fine. Understand all well although my english knowledge is quite limeted. Great tube tester. Excellent work as you always do. Please make a separate website about your tube tester. Thank you and greetings from Germany! Matthias
Hello, I want to build your tube test circuit. I would like to ask for more information. For the current limiting resistor, 6mA, 30mA, 150mA, what value do you use? Thank you in advance.
Vilket fantastiskt bygge Helge! Jag har en del gamla radiorör hemma. Skulle vara riktigt kul att bygga en sådan testare. Finns det kopplingsschema att köpa hos dig ? 73 från Dalarna
Always hold the socket when removing a tube. Otherwise, you risk pulling it apart. Den engelske tale er nem at forstå. :-) ( gætter på du forstår Dansk )
Thanks for the information about the tube socket. I have received comments on this on Facebook. I did not know this even though I have worked with tubes for many years. Great to hear from Denmark. I'm there a lot with our motorhome.
Uffda. IMPORTANT!!!!!
Diodes must be connected from the opamp input pin to +15V power and -15V power.
This is to protect the opamp.
There will be a drawing on my website.
www.la6nca.net/homebrew/tubtester/index.htm
Excellent. Please post website url here. Thank you. Fernando n2fq/6
The english language explanation was excellent. Great project well explained.
The automated voice works well although your English is more than good enough and sounds better.
which page please?
www.la6nca.net/homebrew/tubtester/index.htm
The english is quite good, but you know, I like to hear your voice and read the subtitles 😄
Thanks Helge. I am collecting parts to build one.
A separate web site for this valve tester would be very helpful. The English speaking voice is OK and so are the subtitles. Nice project. Music was a bonus. Many thanks. Best wishes.
Thanks for the helpful comment.
It's fun making videos when I get nice comments.
Fantastic job and great sounding tubes demonstrated.
great video thank you for sharing 👌🏻👍🏻👍🏻👍🏻
Excellent work Helge! That's quite a neat tube tester. To be honest, I prefer when you speak Norwegian and translate your script into English subtitles, but the synthesized voice was surprisingly good!
Nice project and beautiful song!
Interesting project, thanks for the video.
As for the voice - I prefer to hear you and read subtitles.
Excellent design, very practical. Thank you for sharing
Nice project. I think your English is good that I do not need subtitles. Practice will only make it better.
You have some really good episodes. I always enjoy them. Especially the old WW2 equipment from Germany.
I'd like to see more of the RV and G-Wagon in ham radio videos 👍.
Thanks for the suggestions. Great to get such input.
I’ll definitely undertake this project when details of the schematic are available. It’s so much better for amateur use compared to factory tube testers that were used by technicians when they had to fix tube equipment in batches and wanted to save every minute of their tedious work.
Thanks for the comment. Schematic is in the video. I will make a website later.
What a great idea for testing a wide variety of tubes with a minimal outlay of cash are you happy for the viewers of your channel to copy the schematic to build their own version of the circuit. Another great project from you.
Thank you for the nice words. I hope more people will make one.
The music is really nice.
The robot voice pronunciation is quite comical at times, particularly with words like "Kilo" and "Anode." I'm OK with reading subtitles!
Thanks for the comment. I need to learn how to use this in a good way. I can practice speaking more English myself.
Same, prefer closed captions & listening to Norwegian.
Or, dub your English over video, it's good enough. This voice doesn't know basic pronunciations.
Cool vintage tubes!
Amazing! It looks so simple when you make it. I will definitely add this to my list of must make projects!
Fantastic, well done !! thanks for sharing
Excellent project, well done for putting it all together. Another piece of test gear to think about building! English voice is okay, but you sound better.
Added to my to do list!!!
Ładny praktyczny miernik. Ciekawa konstrukcja ... Pozdrawiam
This was an excellent video. I'm thrilled seeing all the tunes in operation.
Thats fantastic!! I 100% plan on doing this... I have built a few tube amps and preamps, but am not 100% sure of the BOM.. would you happen to have any thing already written down??
Du lager fantastiske ting Helge! The best from LB1NH 🙂
Thank you. :-)
The english speaking is fine. Understand all well although my english knowledge is quite limeted.
Great tube tester. Excellent work as you always do.
Please make a separate website about your tube tester.
Thank you and greetings from Germany!
Matthias
Thank you.
Thank you.
Nice build!
Nice job!
Awesome. TY
buenos dias muy buen trabajo y muy explicativo
Hello, I want to build your tube test circuit. I would like to ask for more information. For the current limiting resistor, 6mA, 30mA, 150mA, what value do you use? Thank you in advance.
Engelska eller norska går bra, men jag hade hoppats att du skulle sjunga själv 😊 Hälsningar från Mullsjö
Very nice 👍
👍👍👍👏
Vilket fantastiskt bygge Helge! Jag har en del gamla radiorör hemma. Skulle vara riktigt kul att bygga en sådan testare. Finns det kopplingsschema att köpa hos dig ? 73 från Dalarna
Takk for kommentaren. Her er skjema:
www.la6nca.net/homebrew/tubtester/index.htm
Det kommer mer her.
Actually you can check for shorts, microphonic's and life strength just by plugging the suspect tube into a working amp.
Always hold the socket when removing a tube. Otherwise, you risk pulling it apart.
Den engelske tale er nem at forstå. :-) ( gætter på du forstår Dansk )
Thanks for the information about the tube socket.
I have received comments on this on Facebook.
I did not know this even though I have worked with tubes for many years.
Great to hear from Denmark. I'm there a lot with our motorhome.
@@LA6NCA The glass flask is glued to the base, especially old tubes can slip and tear the connections.
Mit Engelsk er ikke så godt som Norsk og Dansk. :-)
You would pass the STL