Grin's Ebike Motor Simulator Tutoral: --PART 2-- Overview of System Options

Поділитися
Вставка
  • Опубліковано 3 лип 2024
  • The 2nd part of the motor simulator tutorial series covers in more detail each of the various dropdown options available for setting up the simulation.
    ebikes.ca/tools/simulator.html
  • Наука та технологія

КОМЕНТАРІ • 8

  • @BenBrand
    @BenBrand Рік тому +5

    It is so amazing the depth of knowledge and empowerment your website provides to the electric vehicle community!

  • @anthonyrstrawbridge
    @anthonyrstrawbridge Рік тому

    Motor simulator lesson 2 introduced interesting theory of some motor designs and controls. I found it particularly interesting and am looking forward to lesson 3. I think running this simulator on a PC monitor is the to do.
    So far, I understand how to browse the simulator effectively enough to predetermine the benefits, limitations, capability and efficiency.
    In a nut shell the nut 🥜 say's:
    We are at a time and place where stored energy pushes brushes off inductive off and balances on AC half phased DC somewhat rare to USa magnets.
    I've always been afraid of working on a bicycle.....turbines, aircraft, heavy class commercial, light duty automotive electrical and mechanical but afraid of bicycles. I don't know why I would rather trust a bike mechanic but I would.
    Personally, I think it would lucrative and fun to direct focus on airline approved bicycle travel vacation destinations abroad because airline ticket fares are lower than rental cars. My mentor used to make bicycles fit into an airline approved suitcases for English and Scottish country sides. ,✌️♥️👍

  • @rafaobrs
    @rafaobrs Рік тому

    How do you measure torque in your dynamometer? Me and my students are trying to build one.

  • @basher_9754
    @basher_9754 Рік тому

    I can’t even get my system to run at all the brake toggle it on constantly on the dash board with 5volts running through it and the wire is getting warm where it goes into the throttle. It was set up for regen then I took the wires back to basic with the green and blue shorted out and I get 2.5v across the throttle and the brake

    • @basher_9754
      @basher_9754 Рік тому

      My set up is phase runner with a 600w 48v 30amp battery and a sensorless hub motor

    • @GrinTechnologies
      @GrinTechnologies  Рік тому +1

      Have you written into our tech support email? info at ebikes dot ca

    • @basher_9754
      @basher_9754 Рік тому

      @@GrinTechnologies Yes and I have been meaning to reply but I’ve it had chance to have another look at it I’m going to try in the morning and see if I can get the information Raz requested