BIG HOLE Repair | Old Leather Armchair Restoration | leathercare.com
Вставка
- Опубліковано 13 тра 2024
- #leathercare.com #leatherrepair
Our local postman brought us this armchair to be repaired as a present for his dad. It had some areas with damages so big that we would have usually sent away to have it re-trimmed, but since this was a sentimental piece, we worked our magic to repair it back to its former glory.
Here is a list of the products used for this repair:
2:20 - Strong Leather Cleaner
2:20 - Leather Cleaning Brush
2:46 - Solvent Cleaner
3:08 - Leather Sanding Pad
3:37 - Glue Kit with Backlining Cloth
4:27 - Glue-Tex Backlining
4:39 - Thermopad
4:06 - Neutral Binder
5:50 - Leather Filler
5:55 - Spatula
8:48 - GLD Solvent
9:35 - Leather Cleaning Spirit
9:53 - Primer
10:23 - Leather Colour
12:33 - Blocker
13:00 - Top Coat
13:00 - Crosslinker
Leather Sanding Pad 4000
For more details on our products, please visit our website www.leathercare.com
Stay tuned for more and don't forget to subscribe bit.ly/357jThY - Навчання та стиль
Wow what a great job! I think the chair looks brand new!!!! Awesome!!!!!
Loved your video.
Glad you enjoyed it!
Buenisimo!! A ver si pronto también incluyen tutoriales en castellano o subtitulados, así compartir con más compañeros!! Saludos. Desde Mallorca!! 👍🏽👍🏽👍🏽
Thanks for the great video! Couple of questions though:
- After using clear finish from other brands, I've noticed leather starts feels plastic-y after applying it. Is this the same for Colour Lock finish? If yes, is there any way to soften the leather more, giving back more of the original leather feel.
- What spray gun are you using and how do you keep from clogging up the tip (especially when spraying the coating)?
- What type of compressor do I need to keep spraying steadily without stutters due to pressure?
Thanks again!:)
Hi Yannick,
- Our clear coats leave a smooth finish but the plasticy feel might be due to applying too much paint. Excess paint makes leather feel plastic like. Try sanding with a very fine grit like 4000 before applying the clear coat/top coat. this should help too.
- We use a SATA minijet 4400 and after every use we run clear water through it and then soak it in Colourlock Strong Leather Cleaner which prevents it from clogging. We never have any issues when this process is followed.
- We have 2 compressors - a 25 litre Hyundai quiet compressor and a 100 litre and don't have any stutters. A bigger one is suitable as the compressor doesn't have to work as hard. Which one do you use?
When is the size of a hole typically too big to repair?
I'd say a 3 inch diameter is fairly big but mostly those damages are not singular...leather around these holes are usually very weak and you'll have to take that into consideration. In all honesty, we wouldn't have repaired this armchair. We only did this as a favour for our post man who had purchased this as a gift for his father!