Team Garage Hack 2.low The G-SHOT skid plate is designed for it gspeedchassis.com/products/tgh-2-low-oops-edition?_pos=1&_sid=dedea1f17&_ss=r#judgeme_product_reviews
moving the links closer together at the front of the skid plate reduces the roll center in the front allowing the front axle to conform to the rocks a little easier. Widening the rear links adds roll center to stabilize the the truck wile climbing. The total width of the G-SHOT skid plate is only 67mm
I noticed you put the short end of rear lower link towards the skit plate, whereas some other builders connect that link the other way around. Wonder if there’s any advantage of doing it your way?Thx
The reason I do not build a lcg rig is cause I do not want to do all the research for what it takes to build a lcg rig. I don't have the time or patient's for it. Please consider putting together a package deal that has every thing one would need to complete a build. Until then I will most likely not build or buy one.Though I do want one really bad.Minus axel's shock's wheels tires electronics & such of coarse.Thanks for everything you do for the sport,love the videos.Please consider & thank you.Merry Christmas
hey, epic chassis. what transmission and electronics are you running? i have a stock 4ws capra that i was going to use the axles, and maybe some of the electronics, and put them into the g shot chassis.
I'm running the TGH 2.low transmission gspeedchassis.com/products/tgh-2-low-oops-edition?_pos=1&_sid=de15cb321&_ss=r Castle Creations copperhead with a 2500 Acis gspeedchassis.com/collections/3brothers-rc-motors-servos/products/acis-ten-2500kv-10-pole-non-sensored-brushless-motor
@@GSPEEDCHASSIS thanks. would a stock axial capra transmission and electronics fit in? i have no problem buying that transmission (i need the overdrive anyways), but just out of curiosity
How wide are the spacers your using in that g shot rig. I know the skid is 67mm, but the front bumper, or body mount, or those square ones on your rig?
Possibly next month. Know that the sliders are sized for the Power Wagon cab ran with the new G-Shock skid plate that is only 67 mm wide. If sliders are used with a 78 mm wide skid plate the body will not fit to the sliders
@@kylefink3929 The G-LD gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-g-ld-laydown-cms-servo-mount Or the gspeedchassis.com/collections/tgh-v3-products/products/team-garage-hack-dual-servo-mount-%F0%9F%91%89available-4-29-20%F0%9F%91%88-vendor-tgh-rc-concepts-llc
Grabbed a kit! Can’t wait to try it out. Thanks for the awesome products
Thank you for your order!
Great crawler. I'll soon build a LCG crawler with capra axles. Thanks for your information.
You're welcome
Thanks for the Upload Gabriel , Love seeing that G Speed Notification :)
You're welcome bro!
Merry Christmas Mr.G!
Merry Christmas!
Excellent. I will be ordering my Gspeed soon. Thanks.
Thank you!
Great video showing off an amazing rig builders kit!!
👍✌️🍻
Nice overview of the setup. Now take my 💵! Merry Christmas Gabe!
Merry Christmas!
That is one nice kit!
Super cool stuff.
Just ordered this kit and the chassis rails. My first G Speed build
I am in middle of kit now ! Haha 😆 great video as always sorry little late !
Dope, more stuff to get.
HELLO FROM V&B SPEED A NEW RC COMMUNITY CHANNEL ✌ SWEET TO FIND UR CHANNEL
Hey, what's up. Thanks for following. Just curious, how'd you find the channel?
Nice one Bro
Go in by to get this later but gathering parts.
Capra axles. What trans do you recommend? I like wheel speed and front overdrive.
Team Garage Hack 2.low
The G-SHOT skid plate is designed for it
gspeedchassis.com/products/tgh-2-low-oops-edition?_pos=1&_sid=dedea1f17&_ss=r#judgeme_product_reviews
Great video 2 questions
Will a space be needed to mount the 2 low trans
If i miss this round of ordering Will there be another
Merry Christmas 🎅🤶
Use the spacer that comes with the 2.low. more kids should be available in about 2 weeks after these
Is that Velcro front body mount/spacer going to be available separately Gabe? Thanks for another great product, merry Christmas!
Possibly
please explain to me what the rear suspension is supposed to do lol
moving the links closer together at the front of the skid plate reduces the roll center in the front allowing the front axle to conform to the rocks a little easier. Widening the rear links adds roll center to stabilize the the truck wile climbing. The total width of the G-SHOT skid plate is only 67mm
so you think
@@PPsoolong the setup is working amazing
hey Gabe great video, what body is that yellow/black one behind you?
gspeedchassis.com/products/scalers-clear-lexan-body-1-5mm?_pos=1&_sid=5fda55506&_ss=r
Your going to want to bring this rig to Hawaii when you come 😎😎😎
Yes sir! 😎💥💥💥🏁🔝
I noticed you put the short end of rear lower link towards the skit plate, whereas some other builders connect that link the other way around. Wonder if there’s any advantage of doing it your way?Thx
I like the transition that way from skid to links to axles
Did you drill another hole to mount the Tpl Batter tray for your esc ?
Thanks for any info
I'm in the process of building my purple GSHOT 🔥🔥🔥
Yes
The reason I do not build a lcg rig is cause I do not want to do all the research for what it takes to build a lcg rig. I don't have the time or patient's for it. Please consider putting together a package deal that has every thing one would need to complete a build. Until then I will most likely not build or buy one.Though I do want one really bad.Minus axel's shock's wheels tires electronics & such of coarse.Thanks for everything you do for the sport,love the videos.Please consider & thank you.Merry Christmas
@Eric’s R/C Garage Do you a name or two of these my friend?
Great product! I am ready to order but tell me please can I mount 3gear tran on this 67mm skid plate?
Yes
hey, epic chassis. what transmission and electronics are you running? i have a stock 4ws capra that i was going to use the axles, and maybe some of the electronics, and put them into the g shot chassis.
I'm running the TGH 2.low transmission
gspeedchassis.com/products/tgh-2-low-oops-edition?_pos=1&_sid=de15cb321&_ss=r
Castle Creations copperhead with a 2500 Acis gspeedchassis.com/collections/3brothers-rc-motors-servos/products/acis-ten-2500kv-10-pole-non-sensored-brushless-motor
@@GSPEEDCHASSIS thanks. would a stock axial capra transmission and electronics fit in? i have no problem buying that transmission (i need the overdrive anyways), but just out of curiosity
@@orang7789 no
Just wondering if you decase your mamba x ??
Rig looks amazing
Soon as you get the purple rails out I'm getting one.
I did not and do not recommend decasing a Mamba X due to the internal electronics being set in epoxy
Awesome video sir 👍.
Quick question is this designed for a 4 link setup for the front ?
Yes
@@GSPEEDCHASSIS also what driveshaft you recommend ? I am trying to keep this a light weight rig
@@freshej6 www.amainhobbies.com/axial-wb8hd-driveshaft-set-2-axi31133/p-qtqqtqtqymzxactz
@@GSPEEDCHASSIS really appreciate your help 🙏 Just placed my order
@@freshej6 thank you
How wide are the spacers your using in that g shot rig. I know the skid is 67mm, but the front bumper, or body mount, or those square ones on your rig?
67mm
I’m going to try and put this on my wraith 1.9
Will 2 of the TPL battery trays fit inside the CF frame rails?
Yes sir
I want one but I don't know how to piece it all together I'm new I thought the Phoenix is my first one if that tells you how no I am
Check out team driver Tim's channel. Lots of GSPEED Chassis building.
ua-cam.com/users/TRDAdventures
Can I use ar45 portals with this kit ?
I'm not sure, I have not tested other axles with this package. There may be some upper link lengths that need to be adjusted
@@GSPEEDCHASSIS I’ll let you know how it goes got one ordered can’t wait for it thanks for the great product bud
Are you able to do 4ws with that kit?
Yes
No rear steering links included
Were can I buy one
gspeedchassis.com/collections/g-shot
Will the sliders be available separately?
Possibly next month. Know that the sliders are sized for the Power Wagon cab ran with the new G-Shock skid plate that is only 67 mm wide. If sliders are used with a 78 mm wide skid plate the body will not fit to the sliders
Are the rails included in the kit?
Rails sold separately
What bodies have you guys used on it so far
Me just the Power Wagon. Guys in the Team GSPEED Chassis group on Facebook are using some other bodies
where can i get a compatible servo mount
Compatible with what?
@@GSPEEDCHASSIS for the TGH-V3 chassis
@@kylefink3929
The G-LD gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-g-ld-laydown-cms-servo-mount
Or the
gspeedchassis.com/collections/tgh-v3-products/products/team-garage-hack-dual-servo-mount-%F0%9F%91%89available-4-29-20%F0%9F%91%88-vendor-tgh-rc-concepts-llc
bought both kits from KnK
Good stuff!
Are the rails included in the kit?
rails not included.