Fixed and Floated | Making the Tippmann M4-22 More "Serviceable"
Вставка
- Опубліковано 6 січ 2023
- Setting up the .22 LR Tippmann M4-22 to resemble a service rifle by installing a floating handguard tube and a fixed A2 stock. I had been shooting it with a "tube" handguard and a Magpul PRS Lite stock.
Since I wasn't able to use the Milazzo-Krieger trigger, I refitted the ALG Defense ACT with a set of yellow JP Enterprises reduced weight springs.
---
Visit the @konrad1853 channel on UA-cam for excellent service rifle information: / @konrad1853
Anschutz / Hawke Rifle Scope KK50 4x-12x 44mm AO at Champions Choice:
www.champchoice.com/store/Main...
Tippmann Arms:
tippmannarms.com
Overview and History of the Milazz-Krieger M-K II Trigger - The Wisconsin Trigger Company:
• Overview and History o...
---
A special thanks to my friend Steve Ruzicka at DART Firearms Parts & Accessories in Dorr, Michigan.
--
National Match Tippmann M-4 Upgrades - Розваги
I love the set up. Looks great.
Thanks Steve…and thanks for the good pricing on the parts. 👍
That is awesome man!! Nice work 👍👍
Thanks! I appreciate the kind words. 🙂
Fun video to watch and you gave great ideas and insights to future projects with my Tippmann M4-22. Thank you and we'll done.
Thanks…I appreciate your interest!
I love the A2 look. Nice job!
Thanks. It’s quite nice to shoot too! 👍
Pretty cool stuff, Curtis. I’m not much of a builder, but enjoy watching you with your projects! 🤛🏻🔫🇺🇸
Thanks, Walter! The Tippmann has been a fun rifle. 🙂
Great setup and work, Curtis! Love the shim work. Thats a good solution. This should work well to match your other service rifle. Nice shooting on that target too!!!
Thanks, Kurtis. The indoor position shooting is a lot of fun. In previous years before the Tippmann, I usually shot my Ruger K77/22-VBZ with a Leupold Rimfire scope.
Triggertech diamond flat...single most incredible upgrade
Have you run one in a Tippmann M4-22? So far, none of my match triggers have been compatible. Tippmann recommends the Elftmann Drop-In.
@@WilliamCChapin mine is a V2...the top of the hammer needed very minor grinding and the safety facets. The result is simply off the chart!
Elftman will drop in but my diamond is insanely good.
I run the diamond alongside my 1000yard rifles with jewell.
@@Guide504 Thanks for the input. 👍
Have you tried the MBT2 trigger from Larue? I hadn't seen that free float handguard either, it's an interesting setup. The Tippman barrel 'clamp' instead of the extension is kind of novel.. makes sense to turn that notch into the barrel for indexing.
Yes, I have two of them, and I like them! The Tippmann M4-22 has some proprietary parts (the selector is one of them) and the ACT is one of the few “improved” triggers that will drop in. I almost bought another MBT from Steve at DART to try in the Tippmann!
2.65 inches, good to know thanks, I am considering an A2 Stock
Short, but not too big around.
Hi . Could you make a video for Tippmann arm m4 .22 bolt and ejector disassembly . Thanks
Hi Tony! Is there something specific about the bolt and ejector that you’re looking for? I haven’t done anything more than wipe it clean. 🙂
I didn't know they made a free float m4 style fore grip ?
I suppose it’s an A2/A4 handguard since it’s rifle length. Since there’s no gas block on a blowback action, the 16” barrel isn’t a problem.
1:58 I couldn't loosen those four small alen screws on the original hand guard? Too tight 😡
Hmm…I don’t recall having any problem removing them. Perhaps thread locker was used - a little heat may help if that’s the case.
Wow! I don’t mean to be impolite but how much did you spend on extras?
Steve gave me a good deal on the float tube and stock, so with the ALG ACT trigger I probably added about $250, plus the scope, which was under $200 from Champions Choice at Camp Perry last year. All said and done, it was maybe $500 to turn it into what I wanted. Thanks for watching!
@@WilliamCChapin Thanks much for the info… Your video is very inspiring. I have a Tippmann M4 Elite rifle and may use some of your tips…
@@REBELSCL A couple weeks ago I discovered that the 50 foot indoor zero (I’ve been using the same zero for all three positions) with CCI Standard Velocity works at 150 yards with cheap CCI Blazer. It’s super fun to shoot! Thanks for the note!
Will you sell me the original parts you removed ?
That would be quite out of character for me - I keep nearly everything!
Ola
Hello there! 👋
@@WilliamCChapin hi
Seems like Tippmann has found the most moronic way to attach a barrel.
I don’t see it that way. Their approach allows a simple, straight taper barrel to be mounted with standard barrel nuts. Since it’s blowback, no receiver extension is needed for lockup. It makes sense to me.
@@WilliamCChapin At first I thought it's a bit different design, but after seeing a pic with removed barrel it seems to be ok. Still would love to see a dummy barrel extension in end of a barrel.
It's a super fun .22LR, I have really enjoyed it! Thanks for your comments. 🙂
@@WilliamCChapin It truly is. I shot a couple mags through it few months ago, but I'm still maybe going with Nordic or CMMG upper. You have a quite entertaining videos!
@@janik1691 Thanks! I appreciate that. 🙂