Simple Kanthal Coil Build For Beginners
Вставка
- Опубліковано 23 жов 2018
- Basic 5 Wrap 24 gauge Kanthal build
Perfect for any vapers just getting into building or starting out making their own coils.
If you are looking for help, advice and giveaways, check out our Facebook group "Vape Underground - VUG". We have lots of knowledgeable members and Admin all willing to help and support you in giving up the stinkies.
/ vapeunderground - Навчання та стиль
my coil is kanthal a1 26g can you sir suggest what MM, WRAPS, and WATTS it's dual coil?
what mm:?
what wraps:?
what watts?
This is only good for 15 watts isn't it?
How do I make a 40watt coil?
The coil in the video would work better as a dual coil. For a single coil build, for use at about 40 watts, i would suggest using 26 gauge kanthal or ni80. At around 5 turns this will give you a resistance of about 0.5 ohms - 0.65 ohms and perfect for 30-40 watts.
@@VUGLifeUK thanks for the reply.
I only have kanthal 24g right now
Iv made a 5 wrap and its not letting me exceed 18 watts. Highly annoying
@@30poundbag84 what device and setup are you using?
@@VUGLifeUK im using a drag mini refresh with the voopoo rta
If you are running it in "smart" mode it will adjust the wattage to the coil but this is for when you use prebuilt coils or stock coils.
You need to use wattage R mode
RBA wattage mode will allow manual adjustments allowed beyond the Smart restrictions