How to Replace Drum Brake Wheel Cylinder 1994-2004 Chevrolet S10
Вставка
- Опубліковано 27 сер 2024
- Buy Now!
New Wheel Cylinder Set from 1AAuto.com 1aau.to/ia/1ABC...
New Wheel Cylinder from 1AAuto.com 1aau.to/ia/1ABM...
This video shows you how to install a drum brake wheel cylinder on your 1994-2004 Chevrolet S-10. A wheel cylinder is the hydraulic component of a drum brake system. If your drum brake vehicle is leaking brake fluid, or the brakes are seized, this is where to look.
This repair was done on a 1994 Chevrolet S10 Base 2.2L Standard Cab Pickup 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar 1aau.to/oeF/1AX...
• 8mm Wrench 1aau.to/oaq/1AX...
• 11mm Socket 1aau.to/oqC/1AX...
• 19mm Socket
• Brake Spring Tool
• Hose Pinch-Off Pliers
• Torque Wrench 1aau.to/oj2/1AX...
• 3/8 Inch Wrench
• Gloves 1aau.to/obQ/1AX...
• Safety Glasses
• Hammer
• Wire Brush 1aau.to/obs/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you so much it helped so much with my brakes
This was extremely detailed and helpful. Thank you so much!!!!
If the inside of the drum has oil build up/gunk those that mean its time for a new wheel cylinder? Or could it just be the bleeder screw not tight enough? both drums had the same issue.
do you have a video on replacing the clutch slave cylinder on this truck ? my clutch pedal is on the floor and hydraulic fluid leaking out of the bell housing....Not a fun job for me
I picked up a s 10 rear for my car…it has clip on wheel cylinders. Do you know what years used them?
Appreciate the video very thorough, have a question I noticed that the wheel cylinder was a little bit different the old one that I pulled out has a bore of 1 1/16 I am having a difficult time finding a wheel cylinder for this set up do you have a part number and or what auto parts did you get it from? Any info is appreciated