Flange inspection ASME PCC-1

Поділитися
Вставка
  • Опубліковано 21 сер 2024

КОМЕНТАРІ • 43

  • @blazestrawn7331
    @blazestrawn7331 3 роки тому +8

    "No one likes trying to translate between your report and the original drawing."! Preach! I agree. Use the original drawing to label nozzles.

    • @MrEric_API
      @MrEric_API  2 роки тому +2

      Mr Strawn, that is what my channel is all about, preaching the gospel of inspection, its' art and science. Mr.Eric

  • @davidsanford2711
    @davidsanford2711 11 місяців тому +1

    as a retired welder/ pipe welder I find your video's extremely educational. If I wasn't having so much fun building, fabricating, and welding I'd got into the inspection side of the industry. Wish I had a dollar for every lineal foot, test and X-ray I passed, LOL. Your time & work is appreciated Sir.

  • @yo64yo
    @yo64yo 8 місяців тому +1

    Just watching random Industry videos studying for millwright stuff, thanks for the explanation! It's amazing how much of our world wouldn't function without proper seals, definitely taken for granted by many, especially those who walk underneath forklift loads :P

    • @MrEric_API
      @MrEric_API  8 місяців тому

      Glad it was helpful! Tell your friends, family and coworkers. MrEric

  • @kennyadesanya8116
    @kennyadesanya8116 Рік тому +1

    Great job taking your time to explain to all.

  • @nickmora6592
    @nickmora6592 2 роки тому +5

    Great videos! Would appreciate more. Specially of internal inspections

    • @MrEric_API
      @MrEric_API  2 роки тому +1

      Noted! Internal inspections of what kind of equipment?

    • @nickmora6592
      @nickmora6592 2 роки тому +1

      Sorry mr Eric, did not notice you had replied! Most common ones would Be very helpful FKOD, separators, drums… also I was hoping you could help in interpreting table D-2 of PCC1.
      rd < W/4
      W/4 < rd < W/2?
      W/2 < rd < 3W/4
      rd > 3W/4
      Thanks so much.

    • @MrEric_API
      @MrEric_API  2 роки тому +2

      @@nickmora6592 I'll have to do a follow-up video re: the table D-2 of the PCC-1. I normally make a drawing, measure depth and length, record my findings, and then take it back to the office to sit down and "plug the numbers". It gives me an opportunity to review things in the setting of the office, and use something other than back of envelope to arrive at my recommendations.
      Watch for an upcoming video on the subject. Mr.Eric

  • @Ali.AlRahma
    @Ali.AlRahma Рік тому +1

    Thank you for this informative video!

  • @MrEric_API
    @MrEric_API  2 роки тому +3

    Like, share and subscribe.

  • @toufeeqtamboli5490
    @toufeeqtamboli5490 2 місяці тому +1

    I appreciate highly...

  • @FUNTIME-nn9su
    @FUNTIME-nn9su Рік тому

    Thank you Mr Eric for the great video . I want to know step by step how to do inspections on inservice equipment as an inspector

    • @MrEric_API
      @MrEric_API  Рік тому

      A step by step? Like a complete training video?

    • @FUNTIME-nn9su
      @FUNTIME-nn9su Рік тому

      Yes. like pressure vessels exchangers coloum pumps both static and rotary

  • @krishnabharathi9727
    @krishnabharathi9727 2 роки тому +2

    Great video

  • @okaguacharles2943
    @okaguacharles2943 3 роки тому +2

    Thanks

    • @MrEric_API
      @MrEric_API  2 роки тому

      Okagua, No problem. Let me know if you have specific topics that you would like to see reviewed/covered.

  • @willyscreation
    @willyscreation 3 роки тому +1

    Great video!

    • @MrEric_API
      @MrEric_API  2 роки тому +1

      Thanks! Willy, let me know if you have any special requests.

  • @babluhbk5886
    @babluhbk5886 2 роки тому +1

    Thank you very much

    • @MrEric_API
      @MrEric_API  2 роки тому

      You are welcome.
      Let me know if you have any topics you would like to see addressed.

  • @iqbalshohaimi9273
    @iqbalshohaimi9273 Рік тому +2

    hi sir, would appreciate if you can elaborate more the acceptance criteria, how to evaluate accept / rejected as per table D-2

    • @MrEric_API
      @MrEric_API  Рік тому

      Ok, I will do an update video shortly. Mr Eric

  • @arkapravaghosh1950
    @arkapravaghosh1950 2 роки тому +2

    What tool would you suggest for measuring depth of damage in flange serrations?

    • @MrEric_API
      @MrEric_API  2 роки тому +2

      Depends upon how deep and extensive the damage.
      Thorpe pit gauge, or a dial indicator.

  • @user-bs1zi3pi6v
    @user-bs1zi3pi6v 2 роки тому +1

    This a manual for the flanges type RF. How we can inspection RTJ flange face?

    • @MrEric_API
      @MrEric_API  2 роки тому +2

      The ASME PCC 1 also had provisions for inspections of ring joint flanges, perhaps I'll make a follow-up video re: the inspection of a RTJ flange face. Mr.Eric

  • @HTXJM
    @HTXJM 3 роки тому +1

    I have been waiting for some info out of PCC 1 D2

    • @MrEric_API
      @MrEric_API  2 роки тому

      J, You are welcome. Let me know of other topics of interest you may have for future videos.

    • @HTXJM
      @HTXJM 2 роки тому

      @@MrEric_API I understand the Rd dimension is the across the seating surface. However, is ur sizes marked the actual rd dimension across the width? I really would like a video explaining the table D-2 (measurement) example: the meaning of (w/2< rd

  • @jparrales86
    @jparrales86 2 роки тому +1

    Does this also cover nozzles with slip on flanges?

  • @hariharan-dt7yb
    @hariharan-dt7yb 7 місяців тому

    How much accept and reject

  • @sk-ux6ze
    @sk-ux6ze 2 роки тому

    Mr. Eric I need your email I'd to contact
    Basically am a rope access ndt technician

    • @MrEric_API
      @MrEric_API  5 місяців тому

      My email is listed on the yt page.

  • @user-eg8fd7tb4o
    @user-eg8fd7tb4o 9 місяців тому +1

    님이 권위자임?? 변역기 돌리셈

    • @MrEric_API
      @MrEric_API  9 місяців тому +1

      I am a Senior API. So yes, most people would consider my qualifications adequate for those of an authority, or subject matter expert.
      MrEric