“Exhaust Leak” 1967 9.5 HP Johnson What - Why - How
Вставка
- Опубліковано 11 вер 2024
- T-Mikes Website
t-mikesvintage...
T-Mikes Ebay Store
www.ebay.com/s...
T-Mikes Logo Coffee Cup
t-mikesvintage...
T-Mikes Mail In Repair Service
t-mikesvintage...
T-Mikes Parts Broker Service
t-mikesvintage...
T-Mikes Service Offerings with Prices
t-mikesvintage...
Master Tuneup Kit
t-mikesvintage...
Tuneup Kit (no coils)
t-mikesvintage...
Coils
t-mikesvintage...
Tuneup Kit
t-mikesvintage...
Spark Wires
t-mikesvintage...
Spark Plugs
t-mikesvintage...
Fuel Pump Conversion Kit 5.5 HP
t-mikesvintage...
Fuel Pump Conversion Kit 7.5 HP
t-mikesvintage...
Fuel Pump Conversion Kit 10 HP
t-mikesvintage...
Fuel Pump Conversion Kit 15 & 18 HP
t-mikesvintage...
7.5 10 HP Fuel Pump 18-7350
t-mikesvintage...
18-2682 9.5 10 15 HP Gearcase Kit
t-mikesvintage...
5.5 to 18 HP Carburetor Kit 18-7043
t-mikesvintage...
3 to 7.5 HP Impeller 18-3001
t-mikesvintage...
9.5 10 HP Impeller 18-3003
t-mikesvintage...
15 18 20 HP Impeller 18-3002
t-mikesvintage...
Flush Kit 5.5 6 7.5 9.5 10 HPs
t-mikesvintage...
Stop Switch 9.5 HP
t-mikesvintage...
Tiller Grip 1958-1968 3-50 HP 52-1001 204188
t-mikesvintage...
52-1003 Lever Pin 0304155
t-mikesvintage...
Sir, I just purchased my first jon boat and motor. I have rebuilt thr jon boat and resealed it and painted it. I found a , I think, a 67 Jonson outboard 9 1/2 hrp that runs. I'm very capable of working on this but love the fact you are out there for me. You seem like a good guy.
Salut TiMichel ! Just to add some background on this design, I've been told that the 9.5 hp was a somewhat hastingly designed motor that came about under OMC's marketing dept pressure who's research had shown great consumer interest for an all-purpose lght, portable and low sitting engine. Basically, OMC wanted to be first on the market with that product but needed a few years to come up with the revolutionary 9.9 / 15 hp "start from scratch" model. The 9.5 would have been a stop gap engine put together mostly from existing OMC parts. Thanks for the video. Amitiés mon ami !
Good info thx
I've ran across this problem a couple time years ago. Too bad I didn't have internet to solve the problem. One motor I rebuilt and never figured it out. I kept it on the lake at home and just ran it with the cover off for years. I love those little motors. they sip fuel, are quiet, lighter than Mercs and start so easy.
Thanks for this great vid, T-Mike. I own a 9.5 and learned a lot about it. So thanks again 👍🏻
It's always nice to have some tips from a pro. :)
Mine is an Evinrude Twin-Sport 9 1/2 HP which is exactly the same engine. Now I know why and what to look for.
Thanks for sharing your knowledge with us. :)
Thank Mike for taking the time to explain.
Thanks Mike , I’m dealing with that now. Runs better with hood off. I’m thinking it’s the shifting boot.
Mike, very educational videos. Thank you!. I watched pretty much all of your videos and got very interested in that 9.5HP motor. How interested that I ended up buying one for rebuilding myself for fun. :)
Greetings from southern Ontario Canada I really enjoyed the video especially about this special about motor I have a chrysler outboard from 1972 it's the same hp
Thanks so much Tmikes, for the information. thanks for help me, with this problem.
Thank You. T-Mike
Thank You!!! I have turtle 9.9 and it runs great without hood on. I thought I needed to replace the doughnut seal but now I know I need to look at 3 other seals.
Thank you
I love the 9.5’s they are great outboards but this is the only issue that they seem to have. Other than that I think they are great outboards
this is fun last year i did chinese chainsaw in a box and built a Stihl mmm Chihl saw for 170$ im now on my 3rd outboard
2 strokes have more fun not just blondes
Mike. I have a 4hp 1984 johnson and the exhaust cover is shooting on water in spots. What gasket sealer do you recommend? Im assuming its leaking water because there is no sealer.
www.ebay.com/itm/404681728940?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sn3ajpvKTka&sssrc=2051273&ssuid=sn3ajpvKTka&var=&widget_ver=artemis&media=COPY
@@michaeljsimon great channel mike. Your getting me through this pesky build!
Hi T-Mike. How does this engine breath anyway? I've had a look at mine and I can't seem to find an intake vent anywhere. Does it just rely on the cover making a bad seal?
Not sure what you mean - carb sucks in air for mixing with fuel
I would imagine that it was a primitive form of EGR (Exhaust Gas Recirculation) in these motors...
Have you ever changed the upper motor mounts on one of these motors?
Yes. About to make a video on that
I have a 64 9.5evintude I need a gasket on glass fuel bowl on top next to housing,got one,or can I find one
ua-cam.com/video/9t35NTDiwyw/v-deo.html
I can not get this motor to tilt up. Idk if it’s stuck or what. Just bought this don’t know much about it.
Has to be in forward gear to tilt.
where can you get the Shift rod seal and other seals at ????????
ua-cam.com/video/9t35NTDiwyw/v-deo.html