I'm not sure which I like more, the awesome boat or the way you talk about it. Design and function really made the video stand out. Lots of great ideas for all of us boat owners inspired to upgrade what we have. Much appreciate your authentic talk. BTW, swim step is killer. Great job all around.
Congrats, what a beast. I do agree with Michael L. on the Zipwakes, best money spent on my boat. I have a 6.5m hardtop and it makes me look like I know what I'm doing. Cheers enjoy!
Fantastic ! , I really love your design especially in the fishing area. Only adds I would have would be a small grilling bar area just a lil larger than yours, A couple of plop down 2/3 man seats on the sides . In the cabin ,That bench seat could hold a bi fold table top on the side of it , you could set on a collapsible center stand that could stab in the floor or be removed....Ohh and a wench bar holder on the side for crabbing and power for that..Move the Radar electronics to the back or roof on its own bar a lil higher . So the front could have a sun roof or fold back cloth roof.. and a toilet . Im sure you have but didnt show .hehehehe . Im gonna fav this vid to save it definitely .
Lovely boat, congratulations.... I've recently offloaded a BlackWatch 28 (express) which lived in Wannanup canals, I threw a fair bot of folding at her (ironically, with the intention of keeping her, however received an offer too good to pass up) one of the upgrades was the Zipwape system. Honestly, one of, if not the best $$ I've ever spent on a boat. Changed the whole dynamic of her, whether it was booze cruises or wasting $$ on bait in the attempt of catching something, half edible. (haha) 100% putting a set on the new girl. Congrats again on the new Weapon, love the naming theme!
Nice tinny. I used a mooring rope with a loop in the end to hook over a long protruding bolt which I put in the front mudguard & tied it off on the rear cleat to doubly secure my Razerline when hauling it up the ramp on the trailer just with the boat latch connected.
Absolutely stunning… you just made me go from bare aluminum interior on my build to gloss black! Love the headliner as well! Would you still do the gloss headliner again? Any reflection issues on the water? Thanks so much, great build and video.
Absolute beautiful boat ole son, you have certainly done your home work on beauty. I was curious on what type of general fuel burn are you getting with the motor, either the 325 and or 350 ?
@@excessivefishingaustralia2849 until you do I guess - that's the challenge. Everything else is quality may as well spend an extra $100 on a quality filter.
Last two boats you built were awesome but this boat is on a whole nother level. I would give my left 🥥 to be able to afford any one of the first two im definitely in the wrong job . what is it that you do for a Livin if you don't mind me asking. Ps love your walk through vids
How is ya BCDC going? I have just built a 8m ally with a Suzi 300 duo prop, the BCDC (25A) is pulling too much charge for the Suzi when running the power assist as well. Have heard that Suzis dont like DcDc chargers afterwards. About to rip out the Redarc BCDC and keep it simple, prob 2 SSB Ultra AGMs
What is the interior deck size? From helm to bait board and inside gunnel width? Want to build the 7.6m for the lighter weight, already have a y62 and not sure the wife would let me own a ram aswell, but pretty sure I need the space of the 8.2 or 8.5 for the layout I want
Thanks Michael, I got it from south west trailers in Mandurah, it’s composite aluminium paneling, most sheet metal companies should be able to get it for you👌
@@excessivefishingaustralia2849 wow ok, I was thinking it’d be much more to custom build something like that. Still expensive but it’s got me thinking now 🤔
Awesome boat, love the design & attention to detail. One question I have, now your boat is built, is there anything you wish you had have done or anything you want to change?
I neglected to mention in my earlier post, Glass enclosed helm.... I dip my hat 🎩to you.... Nothing worse than leaky clears, which is an oxymoron, as ultimately, you cant see 💩 through them after a long day on the water. 👍👍
The quickest and easiest way to keep the rails and gunnels shiny get some steel wool and soap pads from Woolworths get a hose wet the rails jerk them off with the steel wool and then rinse with the hose simple as
@@excessivefishingaustralia2849 ...hmmm.. seems like Australia has the best alluminum outboard fishing boats. Not sure why that is or why in the US it's all fiberglass. Weird. What am I missing on this issue? Is there something different about your waters or something? How did this ever happen?
can you please give me a rough figure on how much this build is... I need to know is its out of my price range... within a $10K here or there is ok... is this a $150K or $200K build thanks
Love that boat mate looks like a real weapon Sounds like you are based in mandurah. I have a small channel based in mandurah to if you would like to check it out. Not quite the same level budget as you but me and Pop get out as much as possible and have a bit of fun Love to catch up for a chat one day if you are free some time. Cheers Salty Daz
Cheers mate, yeh sounds good, definitely catch up for a yarn, I’ve seen some of your vids pop up on Facebook I think, looks like you blokes have a ball 👌🍻🍻
I'm not sure which I like more, the awesome boat or the way you talk about it. Design and function really made the video stand out. Lots of great ideas for all of us boat owners inspired to upgrade what we have. Much appreciate your authentic talk. BTW, swim step is killer. Great job all around.
Thanks alot, I’m glad you enjoyed it🙌🍻
One of the best boats of seen , well done on the build
Thanks mate
Hey bruz what’s your solar setup like
fishing boats are all about space, keeping it simple and spacious is all what a fisher need
Great boat mate, hope you get some big fish on board for baptism, best of luck,
this even better than i thought yesterday at the boat ramp, mate this is a credit to you and the guys at Oceanic.
Thanks mate, appreciate it🍻
Congrats, what a beast. I do agree with Michael L. on the Zipwakes, best money spent on my boat. I have a 6.5m hardtop and it makes me look like I know what I'm doing. Cheers enjoy!
Thanks mate🍻
That ladder is brilliant!
Great boat and very well made video.
seen this boat multiple times and I fall in love with it more and more I see it 😍😍
Love that deck mate 😁😇 I think I am in chronological order now…❤
Awesome job Aaron, the planning, the quality and attention to detail is next level. Look forward to seeing some 🐟 on board. 👍
Cheers mate, not too long now 🍻🎣🎣
Awesome build, just put some longer slides on the 80L fridge so you can open the the lid and it stays put
Fantastic ! , I really love your design especially in the fishing area. Only adds I would have would be a small grilling bar area just a lil larger than yours, A couple of plop down 2/3 man seats on the sides . In the cabin ,That bench seat could hold a bi fold table top on the side of it , you could set on a collapsible center stand that could stab in the floor or be removed....Ohh and a wench bar holder on the side for crabbing and power for that..Move the Radar electronics to the back or roof on its own bar a lil higher . So the front could have a sun roof or fold back cloth roof.. and a toilet . Im sure you have but didnt show .hehehehe . Im gonna fav this vid to save it definitely .
Lovely boat, congratulations.... I've recently offloaded a BlackWatch 28 (express) which lived in Wannanup canals, I threw a fair bot of folding at her (ironically, with the intention of keeping her, however received an offer too good to pass up) one of the upgrades was the Zipwape system. Honestly, one of, if not the best $$ I've ever spent on a boat. Changed the whole dynamic of her, whether it was booze cruises or wasting $$ on bait in the attempt of catching something, half edible. (haha) 100% putting a set on the new girl.
Congrats again on the new Weapon, love the naming theme!
Thanks mate 🍻👌
very detailed set-up!! super!
Thanks for showing us your new boat. You’ll get credit for many ideas for mine. Have a ball in Exmouth
Cheers buddy, thanks for watchin, I will have a ball, and hopefully plenty of fish🍻🎣🎣
That is up there with best boat build ever
thank alot mate
Nice tinny. I used a mooring rope with a loop in the end to hook over a long protruding bolt which I put in the front mudguard & tied it off on the rear cleat to doubly secure my Razerline when hauling it up the ramp on the trailer just with the boat latch connected.
Yeh that’s a wicked idea mate👌 piece of mind anyway🍻
put Nylac on the polished aluminium. Seems to work well and for a very long time.
Absolutely stunning… you just made me go from bare aluminum interior on my build to gloss black! Love the headliner as well! Would you still do the gloss headliner again? Any reflection issues on the water? Thanks so much, great build and video.
Thanks heaps mate, nah not at all, it’s mint, I would do the same in a heartbeat🍻
Love the boat. If paint a clear on the polished aluminum it will last longer and better looking
Yes your very experienced
And know what you want
Fantastic enjoy your hard earned money Cheers
Absolute beautiful boat ole son, you have certainly done your home work on beauty. I was curious on what type of general fuel burn are you getting with the motor, either the 325 and or 350 ?
Thanks a lot mate, we are burning 2L/nm at 26kn loaded with the 325, I havnt got the 350 yet, still waiting🤦♂️
Awesome video review mate, 👌 beautiful boat mate, I'd seriously live in that
Would love to see it running and on/off trailer! Sweet vessel mate!
Thanks mate, more footage coming soon👌
Great build - only change is swapping that cheap fuel filter for a Racor ASAP.
Cheers mate,Yeh never had a problem with this setup tho😎
@@excessivefishingaustralia2849 until you do I guess - that's the challenge. Everything else is quality may as well spend an extra $100 on a quality filter.
Nah those filters are fine mate - you just a sucker for good advertising
NOT KIDDING BRO WE PAST U GIYS ON THE ROAD IN WESTERN AUSTRALIA.
Thanks for checking us out mate
Amei essa embarcação, muito espaço bem confortável, um sonho pra ser realizado 🛥️🧭👍👍👍👍👏👏👏🙌🔥⚓😍
Wow awesome chanel guys, absolutely crazy quality videos🙏👍
A beautiful boat
awesome build, should be a weapon at Exmouth
Last two boats you built were awesome but this boat is on a whole nother level. I would give my left 🥥 to be able to afford any one of the first two im definitely in the wrong job . what is it that you do for a Livin if you don't mind me asking. Ps love your walk through vids
Thanks alot mate, Im an auto sparky and run my own business!
Love it. What brand of rocker switches / what supplier can I get some from please
Thanks mate, they are Narva switches, you can get them from repco, Napa or even online👌
How is ya BCDC going? I have just built a 8m ally with a Suzi 300 duo prop, the BCDC (25A) is pulling too much charge for the Suzi when running the power assist as well. Have heard that Suzis dont like DcDc chargers afterwards. About to rip out the Redarc BCDC and keep it simple, prob 2 SSB Ultra AGMs
How does it ride in the rough sea ? Have you video of that please mate ?
Amazing set up! The welds though? Who built it?
Cheers, I mention who built the boat several times in the vid.Not sure what you mean by “The Welds Though”, the welds are fine🤷♂️
What is the interior deck size? From helm to bait board and inside gunnel width? Want to build the 7.6m for the lighter weight, already have a y62 and not sure the wife would let me own a ram aswell, but pretty sure I need the space of the 8.2 or 8.5 for the layout I want
Yeh the extra length definitely help with flexibility when it comes to layout.
I will get back to ya with the inside dimensions🍻
how much is the build mate ? this is awesome !
That is one amazing rig, absolute weapon ! Congratulations mate, What she cost roughly to build mate ?
Thanks mate, around the 250k mark👌
@@excessivefishingaustralia2849 that’s good value for a rig of that calibre , lovely work. Enjoy 🎣
Nice work... cost ?
Hey boys love the build. Where did you get the roof lining from ? Looks the goods over the carpet i was going to use as well !
Thanks Michael, I got it from south west trailers in Mandurah, it’s composite aluminium paneling, most sheet metal companies should be able to get it for you👌
is the best.. my dreaming of the boats
Can you give us a ballpark figure of what this whole project costed? Interested to know
Ballpark is around the $250k mark
@@excessivefishingaustralia2849 wow ok, I was thinking it’d be much more to custom build something like that. Still expensive but it’s got me thinking now 🤔
Great setup. Just one thing, where do you bleed your fish before putting them on ice?
We bleed them straight into out Logix fish bag with the ice slurry👍
awesome, total cost ?
Awesome boat, love the design & attention to detail. One question I have, now your boat is built, is there anything you wish you had have done or anything you want to change?
Thankyou mate, we are on our first trip away with it, so I will let ya know after we get back, but so far I wouldn’t change a thing👌
Nice weapon mate💪💪💪
Hey mate how do you tow 4.2t with your cruiser? I have asked around and got told that no matter what it wa you can’t upgrade btc
Love to hear the answer to this. But I am guessing it's just a she will be right kinda thing
Yes you can , we have a 79 with a jmaxc 4495 gvm and 4500 tow capacity, needs auto for the 4500
Nice rig mate, how much all in all for that kind of a boat mate?
Thanks mate, just north of 200g, depending how much ya do yourself
I neglected to mention in my earlier post, Glass enclosed helm.... I dip my hat 🎩to you.... Nothing worse than leaky clears, which is an oxymoron, as ultimately, you cant see 💩 through them after a long day on the water. 👍👍
Awesome boat. How much is it to build a similar one?
Ya lookin around the 200k👍
The quickest and easiest way to keep the rails and gunnels shiny get some steel wool and soap pads from Woolworths get a hose wet the rails jerk them off with the steel wool and then rinse with the hose simple as
Thanks mate, I will give it a shot👌
Soooo good
Have to admit the green eyes are glowing.
Very nice rig.
How much does your trailer weigh on its own ?
Thanks mate, the trailer came in at 670kg
@@excessivefishingaustralia2849 that’s pretty light considering the size of it.
Yeh ail is the way to go👌
I pretty sure I seen that boat parked in butler
Do u live on the mandurah canals
Nah, the bloke I sold my centre console too does🍻
Hey man is this gospel boats ? In China ?
Nah this is no Chinese boat, it’s Australian made🍻
In America you can’t find recreational offshore Aluminum fishing boats. AmazingZ
Do you sell these in Florida or any part of the US?
@@Coleen-Love no we don’t sorry
@@excessivefishingaustralia2849 ...hmmm.. seems like Australia has the best alluminum outboard fishing boats. Not sure why that is or why in the US it's all fiberglass. Weird. What am I missing on this issue? Is there something different about your waters or something? How did this ever happen?
Hey mate, are you able to pull from both tanks at the same time?
Hi mate, yep, I can draw from both tanks together👌
can you please give me a rough figure on how much this build is... I need to know is its out of my price range... within a $10K here or there is ok... is this a $150K or $200K build thanks
This just recently sold for around $265k well that was what it was advertised for 😊
To build this boat today you are looking at 250k +, and that’s if you do most of the fitout.
Is this sold?
@@maniyhy9451 yep
Approximate price for the boat?
approx $265k
@@excessivefishingaustralia2849 thanks.
Love that boat mate looks like a real weapon
Sounds like you are based in mandurah.
I have a small channel based in mandurah to if you would like to check it out. Not quite the same level budget as you but me and Pop get out as much as possible and have a bit of fun
Love to catch up for a chat one day if you are free some time.
Cheers Salty Daz
Cheers mate, yeh sounds good, definitely catch up for a yarn, I’ve seen some of your vids pop up on Facebook I think, looks like you blokes have a ball 👌🍻🍻
One outboard is more than enough for ally boats.. the mercury 300hp xs would be a beast on this boat
Would be a bit slow
Nah mate, cruised all day on 38kn, topped out at 40.5 and best cruising,most economical speed was 26kn😎
Yea how much ? I want one
What's the price tag with such setup?
Is that a tri hull at all?
Nah it is a mono hull, just has large chines👌
Mate are able to tell me how much ?
Around the 200k mark😎
How much did it cost to build
Just out of curiosity what made you go suzuki over a mercury or yamaha??
suzuki are cheaper, just as reliable, and have dual props above 325hp models.
But the main reason is Suzuki are the only manufacturer that offer the 350hp at the moment🍻
Hey mate what’s the beam on this one?
My bad didn’t listen properly
Do you still have the previous boat?
Nah mate, sold it recently🎣
Great video anyway, looking forward to your other upcoming trips
my guy at port coogee
is this another new boat
Yep
My new 250 Murc v8 20 hours let go 2 cylinders when out wide had to limp home on 6 cylinders now I have trust issues
That sucks, what was the issue with it?
Bugatti of fishing boats, nice
Excessive Boat for Excessive Fishing 👍🏻
You have literally had multiple boats that people could only dream of having 💪 all absolute weapons but the big walk around hard top was my favourite.
Also the seating area on this boat is 👌👌👌
Fuck one Bad ass boat
Cheers mate
Whats the price range ?
Around the 200k mark if you do most of the work yourself👌
Don’t sell this one for a while now
nah I think I will keep this one for a bit now;)
Can’t turn outboard when trim to far by the looks! That is poor. It’s hitting the rail!
It’s doesnt hit the rail bud🤦♂️
@@excessivefishingaustralia2849 okay! Sorry for a comment that wasn’t to your liking. It’s barely trimmed and looks very close but okay. 💆♂️
@@Skits_Missions all good🎣
Awesome job that is a sexy looking boat
how much did it cost for the whole u deck floor? @excessivefishingaustralia2849
Roughly 10k
That is and amazing 🪜 design