I lowered my pop ups about 18 years ago. My nut ended up snapping off from the bolt. I then got entered tungsten bolts. 18 years later. Still lowered without issues. I have shortened shocks as well.
I hope you're still remember me a former classmate busy making a name for himself on social media keep it up Adrian bro and say awe to Joshua for me your car is coming along nicely
Yo started watching your content this week, was looking for ideas for my pop up and finally someone with a pop up showing their mods. Car looks neat! keep up the content brother.(Also where to get spares? looking for headlight and beadings)
Hey thanks man appreciate the support🙏🏽 spares are rare to get hold of man, scrap yards are your best bet, if you’re in Cape Town there’s scrap yards in salt river that I’ve heard of that have pop ups in. Also keep an eye on Facebook marketplace slot of people are stripping or selling spares
@@lazarusoageng9786 hey man, lowering it by the torsion bar is actually the only way to drop it, but the shock mount mod is optional, doing that mod will just prevent your shocks from bottoming out. Since then I’ve raised the car back up because of my nature of work, I drive a lot and the roads aren’t favorable so my fenders rubbed a lot and my driveshafts also scrape on the frame Best to drive slow when you lower it like that 😂 I lower it for meets now but daily driving I leave it at a 1 and a half finger gap
Yes! The mods that I did to the shocks are not necessary to lower the car at all. If you loosen those bolts under the car that I showed, it'll lower your car and thats all you need to do
I’m not entirely sure I haven’t lowered my rear yet, but from what I’m told you can use sleeveovers, and from the forums I’ve read, you need to shorten the panhard bar on the axle otherwise the lower you go, your axle gets pushed over to the driver side, so your driver side wheel will poke out the fender and the passenger side will sit inside the fender You can either shorten it by cutting it and welding it, or cutting it, welding a threaded rod in to make it adjustable, or you can buy an adjustable one from America, not sure if they sell any here
@@iamToshMabals clearly you are missing the point....read deeper into wat i posted...this is content that this man want people to view and like on youtube....so my question was is this worth it content? no its not point blank
Well kiddo, multiple people asked me how to lower their pop up, as well as do the top mounts, it was something I also wondered about when I got the car. You seem to be the only one bothered about it
Slammed at Adi's Garage🙌😀
Ayyy 😌
Guess who back with a brand new act 😍
Hawwws😏😂
Quality is sublime.👌🏼
Preciate it bro🥰
I lowered my pop ups about 18 years ago. My nut ended up snapping off from the bolt. I then got entered tungsten bolts. 18 years later. Still lowered without issues. I have shortened shocks as well.
I hope you're still remember me a former classmate busy making a name for himself on social media keep it up Adrian bro and say awe to Joshua for me your car is coming along nicely
Awe I remember you bru, thanks for the support G❤️🥰
Yo started watching your content this week, was looking for ideas for my pop up and finally someone with a pop up showing their mods. Car looks neat! keep up the content brother.(Also where to get spares? looking for headlight and beadings)
Hey thanks man appreciate the support🙏🏽 spares are rare to get hold of man, scrap yards are your best bet, if you’re in Cape Town there’s scrap yards in salt river that I’ve heard of that have pop ups in. Also keep an eye on Facebook marketplace slot of people are stripping or selling spares
@@AdiStevens hey man, wanna know is lowering it that way the best way and is it running nicely ever since you dropped it?
@@lazarusoageng9786 hey man, lowering it by the torsion bar is actually the only way to drop it, but the shock mount mod is optional, doing that mod will just prevent your shocks from bottoming out. Since then I’ve raised the car back up because of my nature of work, I drive a lot and the roads aren’t favorable so my fenders rubbed a lot and my driveshafts also scrape on the frame
Best to drive slow when you lower it like that 😂 I lower it for meets now but daily driving I leave it at a 1 and a half finger gap
Thank you
🥰🥰
How do you lower the back but not with those china town sleeves,, like do you get coilovers for the rear of which cars wil fit for front and rear?
I honestly don’t know about that, mine are stock, and when I asked on a Facebook group about coilies, everyone said to use the sleeves
Adi does your popup have speekers in tbe back window? Or seatbelts at back?
It’s got speakers at the back window yes, but not seat belts
Hi bud , do you know if I could fit a 150i motor in my 130i without changing the gearbox perhaps ?
Did u know if left the dust cover on and dropped the car on to the floor the cover would've been firm
Howzit bro, is there any way to lower the front just a little bit without changing anything?
Yes! The mods that I did to the shocks are not necessary to lower the car at all. If you loosen those bolts under the car that I showed, it'll lower your car and thats all you need to do
@@AdiStevens thanks alot, really appreciate it 👍
What shocks can I use to lower the back
Yo Bro. Where can I get parts for mine?? A taxi recently wrote of my left front side....
Can you stil lower the front without replacing the tophat bolts.
Yes you can, what I did in the video was just to make the drive a little better
SHEEEEESHH
🥺
How do you do it on the back do you change the shocks to lower it
I’m not entirely sure I haven’t lowered my rear yet, but from what I’m told you can use sleeveovers, and from the forums I’ve read, you need to shorten the panhard bar on the axle otherwise the lower you go, your axle gets pushed over to the driver side, so your driver side wheel will poke out the fender and the passenger side will sit inside the fender
You can either shorten it by cutting it and welding it, or cutting it, welding a threaded rod in to make it adjustable, or you can buy an adjustable one from America, not sure if they sell any here
Like ur content buddy. But u must drink score not redbull
Thanks 🥰🙏🏽I drink everything actually, all depends on my mood
I drive without the bolt daily 😭😂
You nuts 😂😂😭
круто! у меня такая же тачка
First
Joh Adi need assistants with my pop up...
send ur degits.
Message me on instagram bru, @adi_stevens
69th
Woah😏
456th🙊
Is a feature needed on how to install shocks on a honda? 🤔
Yea maybe you can show Adi how to charge his tyres also he’s running low battery for higher boost.
Is a comment needed by someone irrelevant ? 🤔
@@iamToshMabals clearly you are missing the point....read deeper into wat i posted...this is content that this man want people to view and like on youtube....so my question was is this worth it content? no its not point blank
Well kiddo, multiple people asked me how to lower their pop up, as well as do the top mounts, it was something I also wondered about when I got the car. You seem to be the only one bothered about it
@@AdiStevens well boet you should've left the "kiddo" out your reply and just give feedback on the last part like u did now it makes sense....