Hey man, thanks for doing this video. Especially the settings part. I followed your settings @3.45 everything lines up perfectly at the front for me. Now I believe I have something wrong with the motor it gets extremely hot very fast and sometimes at lower speeds it makes a creaking sound and stops moving. If i continue driving I smell burnt. Do you have any idea what might cause that? It's a 3500kv gl motor.
I also was able to make the rear end shorter than the front by using the short arms, 0 camber and Narrow 0 offset wheels. Now i need to figure out the length of the rear turnbuckles to make the wheels straight.
Thanks, i really appreciate your comment, i am assuming the your pinion and the spur gear enough room to wiggle a little, i am using stock spur gear and don’t remember size of my pinion gear(second to the smallest gear), i hope you join the facebook community “custom 1/28 GL drifting” dedicated to GLD, i am using cheap 3500kv rocket motor, i hope you can post some pic or video at the fb page so members can help.
And can you test the motor not attach to the spur gear and let it run slow speed? Does it run normally without the creaking sound? If it still have the same issue, it might be the motor, I hope you can ask for a replacement motor from the dealer you bought it from.
@@nixosnixos1227 that’s not normal, did you contact the seller, and ask about the issue? I hope they can replace it, how about your motor terminal soldering i assume there fine.
Hey man, thanks for doing this video.
Especially the settings part.
I followed your settings @3.45 everything lines up perfectly at the front for me. Now I believe I have something wrong with the motor it gets extremely hot very fast and sometimes at lower speeds it makes a creaking sound and stops moving. If i continue driving I smell burnt. Do you have any idea what might cause that? It's a 3500kv gl motor.
I also was able to make the rear end shorter than the front by using the short arms, 0 camber and Narrow 0 offset wheels. Now i need to figure out the length of the rear turnbuckles to make the wheels straight.
Thanks, i really appreciate your comment, i am assuming the your pinion and the spur gear enough room to wiggle a little, i am using stock spur gear and don’t remember size of my pinion gear(second to the smallest gear), i hope you join the facebook community “custom 1/28 GL drifting” dedicated to GLD, i am using cheap 3500kv rocket motor, i hope you can post some pic or video at the fb page so members can help.
And can you test the motor not attach to the spur gear and let it run slow speed? Does it run normally without the creaking sound? If it still have the same issue, it might be the motor, I hope you can ask for a replacement motor from the dealer you bought it from.
@@oliverstoys8411 removed the pinion and let the motor run. There's no noise but it gets burning hot with smell in less than a minute.
@@nixosnixos1227 that’s not normal, did you contact the seller, and ask about the issue? I hope they can replace it, how about your motor terminal soldering i assume there fine.