Download the Phased Array App from google play store. Just search "PAUT Buddy" or follow this link: play.google.com/store/apps/details?id=com.saurabh_lawande.NDT
1velocity...2wedge delay and 3sencibility.... the omniscan use the velocity of the material to calculated the delay of the wedge....that is the reasons
Hi Wagh Calibration Procedure for a Zero Degree PAUT Application such as Corrosion Inspection is useful I have a PAUT task on 95mm carbon steel block cladded with 3mm SS 316L How to fabricate this block and wherto put holes either SDH required or FBH required need your suggestion
Hi Na v, you have to have a clad block of same thickness and cladding. All you need to calibrate for is wedge delay. Reference Sensitivity: First BW from 95 mm should be set to 80% FSH. No TCG needed so you do not need FBH or SDH unless you are also looking for volumetric defects and not just corrosion. And then map any reduction in thickness. Report like C Scan with different color indicating remaining thickness. Note: this is just a suggestion. Refer to your company procedure before performing inspection.
Download the Phased Array App from google play store. Just search "PAUT Buddy" or follow this link: play.google.com/store/apps/details?id=com.saurabh_lawande.NDT
Thank you so much...Your explanation was clear and concise.
You are welcome.
This video changed my life
Good to hear that.
Ok, maybe it didn't change my life....but Pratik is a great teacher, and his passion for others to learn is evident.
This is so helpful, love all your videos.
Thank you! I am glad it helped you.
1velocity...2wedge delay and 3sencibility....
the omniscan use the velocity of the material to calculated the delay of the wedge....that is the reasons
That's correct! The wedge is made of Perspex and the instrument thinks it is Mild Steel.
+Pratik Wagh....olympus madr the wedges whith Rexolite....w/acustic propieties closer to water
Hi, how you remove signal from wedge if you testing let's say 100mm thick plate?
Hi Wagh
Calibration Procedure for a Zero Degree PAUT Application such as Corrosion Inspection is useful
I have a PAUT task on 95mm carbon steel block cladded with 3mm SS 316L
How to fabricate this block and wherto put holes
either SDH required or FBH required
need your suggestion
Hi Na v, you have to have a clad block of same thickness and cladding. All you need to calibrate for is wedge delay. Reference Sensitivity: First BW from 95 mm should be set to 80% FSH. No TCG needed so you do not need FBH or SDH unless you are also looking for volumetric defects and not just corrosion. And then map any reduction in thickness. Report like C Scan with different color indicating remaining thickness.
Note: this is just a suggestion. Refer to your company procedure before performing inspection.
can you give me a video of linear beam set setup and calibration process !!
Surely.
Hi sir. I have questions sir. Omniscan sx is capable for HDPE pipe (high density polyethylene)?