thank you and yes, we made a workshop out of a container, which was a refrigerator. So we also have finished walls and 5 cm of insulation on the inside
Tagalog: Naglagay siya ng langis na tinatawag na Belinka Oil Food Contact (ligtas para sa pagkain sa ibabaw)". Punasan ito, hayaang sumipsip ng isa o dalawang minuto, at punasan ang labis sa kahoy. English: He applied an oil called Belinka Oil Food Contact (safe for eating surfaces)". Wipe it on, allow it to soak in for a minute or two, and wipe the excess off of the wood.
@@thedevilinthecircuit1414in this video i have used belinka oil, but i think that Belinka oil i can buy only in my country. Otherwise is very good oil Danish oil. It is the same if not better
Thank you. I realy enjoy wood turning😁 If you are thinking of washing these wooden plates in the dishwasher, this is not really recommended. The best way to clean it is just with hands and warm watter and you can use dishwashing detergent
@@Pipejawood-Woodturning domyslilem sie ale to zmniejsza grubosc dna w talerzu -widzialem jak mocuj,ana klej(dno jest wtedy calkiem plaskie -pozdrawiam
thank you. Yes, you can do it with glue, but you never know if the glue will stick or not, for that I prefer to do it the way it is in the video and I have no problems. thanks again for watching the video and your comment
Well done mate lovely piece
And good choice of lathe
Thank you. With my record power coronet herald i am very satisfied
Joli travail, bravo. Avec un salut amical de France
merci beaucoup. recevez les salutations chaleureuses de la Slovénie
Walnut has a really beautiful texture.👍👍👍
Yes is realy beautiful
Simple and classic
Thank you. And yes, that was my intention as well
Szybko wykonane .Piękny efekt.
Splendida venatura ed accurata finura
Thanks. 😊😊😊😊
Good job beautiful grain thanks for sharing stay safe👍👍👍👍
Thank you. I have make 10 peces, and every one have beautiful grain
Beautiful! And it appears your whrkshop is a ?truck body? That's a pretty cool idea!
thank you and yes, we made a workshop out of a container, which was a refrigerator. So we also have finished walls and 5 cm of insulation on the inside
Nice work and a great finish, keep safe, John
Thank you John
Great video! Well done!
Thank you for your comment. That meen allot to me ☺️
You attached a flat piece of wood to a Chuck. How on earth did you do that?
Thank you for watching our video. I didn't record that i have drill a 55mm hole in the one side. You can see that here 8:53
great job ,,,,,,,,,,,,great wood why in the uk do we get crap lol
Thanks
How did you start the blank’s recess for you Chuck to allow mounting to cut the tenon?
I have drill a 55mm hole with my forstner bit
Supper
Thank you😊😊😊
Very nice! Great video!!👍🏻
Thank you very much!
Ano po ung pinapahid na pang kulay? May mga wooden plate kasi kami na luma na gusto ko sana i-restore. Paided na kasi
Thank you for your comment but i am very sory, i dont know what do you answer me🙃. Can you write in english
Tagalog: Naglagay siya ng langis na tinatawag na Belinka Oil Food Contact (ligtas para sa pagkain sa ibabaw)". Punasan ito, hayaang sumipsip ng isa o dalawang minuto, at punasan ang labis sa kahoy.
English: He applied an oil called Belinka Oil Food Contact (safe for eating surfaces)". Wipe it on, allow it to soak in for a minute or two, and wipe the excess off of the wood.
@@Pipejawood-Woodturning The question is, "what finish did you apply? I have some old wooden plates I'd like to restore."
@@thedevilinthecircuit1414the best finish for those plates is Danish oil. It is very durable
@@thedevilinthecircuit1414in this video i have used belinka oil, but i think that Belinka oil i can buy only in my country. Otherwise is very good oil Danish oil. It is the same if not better
Very nice. I enjoyed watching as much as you enjoyed creating it. Tell me...is it dishwasher safe?
Thank you. I realy enjoy wood turning😁 If you are thinking of washing these wooden plates in the dishwasher, this is not really recommended. The best way to clean it is just with hands and warm watter and you can use dishwashing detergent
Was this mounted to a tenon?
Hello. Thank you for watching our video. For start i have drill a 55mm hole that i attach chuck to it. This i didn't record. Later i have make a tenon
Was trying to read the can of finish and what is in the spray bottle.
In the spray bottle i used dinatured alcohol. I use this that grains in the wood poop up and than sand it again. If you do that is finish much nicer
@@Pipejawood-Woodturning what was in the can. Thank you
Can you tell me what do you mean whith that (what was in the can?)
@@Pipejawood-Woodturning the oil that you brushed on as the final. It appears to be a friction polish
@@jasmine5921 for finish i use Belinka oil food contact.
How this was it to start? And are you using a wood worm or glue block?
Hello. Before i start turning i have drill 55mm hole in the wood for chuck
Sorry darn autocorrect....that was supposed to say how THICK was the wood you started with.
The wood was 2.5 cm thick
what is the name of the machine you used to spin the wood
? please tell me sir
The woodturning machine is from company Record Power Coronet Herald
Kayu apa?
This is walnut wood
what is used for a finish?
For finish i use oil. I used Belinka Oil food contact
juz na poczatku ukrywasz jak mocujesz deske do uchwytu -
Hello. Sory for that. at the beginning I drilled the hole with a 55mm forstner drill bit
@@Pipejawood-Woodturning domyslilem sie ale to zmniejsza grubosc dna w talerzu -widzialem jak mocuj,ana klej(dno jest wtedy calkiem plaskie -pozdrawiam
thank you. Yes, you can do it with glue, but you never know if the glue will stick or not, for that I prefer to do it the way it is in the video and I have no problems. thanks again for watching the video and your comment
If that rag catches, I have seen guys lose thier hand, please be careful!!
Thank you, i will becareful☺️
you have seen more than one guy lose his hand?
@@simonladd4262 No, just one and that was enough.
It's called burnishing and that's how its done. Nobody has lost a hand burnishing.
Woodglut has a lot of designs to choose from.
Shapes bowl with 40 grit concrete sander. Lol
Sory but this is not concrete sender. And with dimension 125mm is much faster than 50mm discs