Cheers mate, honestly I have no interest on this product today but your videos are so dang clean & insightful its a joy to watch. And you can really tell the passion you put into your videos because the outcome is the awesome quality cheers lad' & happy mother luvvin NewNew excited for more to come.
I have a couple of rip offs of these and I've been really happy with them as test benches... and I'm looking to buy another one. When I bought the ones I have, they were A LOT cheaper and they're still pretty good. But now they're like $150, and at $50 more, I might get one of the real deal instead.
I personally own the BC V1.1 and absolutely love it 🥰🥳👍! Great product, but a little pricey getting it here in Australia 🇦🇺 …… I got mine when AUD was much closer parity to USD than what it is now so was much better value! Great video Nick, cheers 🍻 buddy. Happy New Year to you and the missus 🥰🎉🥳
6:20 if Audi made a PC case it’d be like “You want the Power button? You need to buy the comfort pack which includes sound-insulating solid front panels, 6 usb Type C ports and 9 reset buttons”😂
Your videos is the one which attracted and inspire me to build a gaming rig, the builds you do are awesome... but i have one question, you make lots of pc rigs and test their thermal of the different cases so which is the best case among your builds and give the best thermal performance?
Hi Nick! I am fairly new to the PC repair industry and really hope to find a great open-air test bench this year. Is this still good in 2024 or do you recommend anything else? I'm in the US so maybe I can source some alternatives here :D. Thanks in advance!
Hi, I got this bench and just can't figure out how to install an arctic 420 mm liquid freezer on the top just above the cpu.I would have to do a pull configuration and I am not sure it is a good idea. Do you have any tips? Thanks!
Indeed the full name is "Titanium Grey". The OBT Team looks at getting a REAL titanium version made but this is EXTREMLY complex... and costly! Maybe that will happen for a special project :D
Are there any washer out of box?Cause I look into the user guide of BC1.1 and find out that washer showed up under every screw,did they cancel all the washers of lastest version or something? streacom.com/downloads/ug/bc1.1-1712.pdf
Cheers mate, honestly I have no interest on this product today but your videos are so dang clean & insightful its a joy to watch. And you can really tell the passion you put into your videos because the outcome is the awesome quality cheers lad' & happy mother luvvin NewNew excited for more to come.
Love my original BC1, have two thick 420mm radiators slapped on the ends and it looks a little silly but its perfect
We would love to get picture of your setup! can you send them to the Open Benchtable Team?
hey man what length power switches are best? 350mm or 550mm?
What a versatile test bench. More useful then a motherboard box lol. Here's to an awesome year of Gear Seekers content in 2022!
Thanks Nick and fam! Have a wonderful new year mate!
Awesome video fams, the Open Benchtable BC1 V2 is an awesome bit of kit. Keep up the hard work and bring on 2022 for GS video content
I just got this and was building it today for my AM5 platform build. Didin't want to spend 30 min figuring it out so thank you! lol
I have a couple of rip offs of these and I've been really happy with them as test benches... and I'm looking to buy another one. When I bought the ones I have, they were A LOT cheaper and they're still pretty good. But now they're like $150, and at $50 more, I might get one of the real deal instead.
I personally own the BC V1.1 and absolutely love it 🥰🥳👍! Great product, but a little pricey getting it here in Australia 🇦🇺 …… I got mine when AUD was much closer parity to USD than what it is now so was much better value! Great video Nick, cheers 🍻 buddy. Happy New Year to you and the missus 🥰🎉🥳
Have the silver version. I literally build my main rig with it. Love mine. Who needs a case?
I'm more inclined to build a proper PC with now it can stand up
Happy New Year
LOVE IT - gonna source one for Canada. Thanks for introducing the open bench - was actually looking for one after my TT P3 build.
Best benchtable made yet
I was waiting for the v2 to be released and cant wait to pick up the ITX version
The ITX version is cool too. The V2 ITX is coming soon.
Love the music at the end
i was looking for this video just yesterday!
6:20 if Audi made a PC case it’d be like “You want the Power button? You need to buy the comfort pack which includes sound-insulating solid front panels, 6 usb Type C ports and 9 reset buttons”😂
*... for just a mere $4,000! ; - )
Wish you could do a full build with a 4090 with this vertical.
this looks sick!!! Getting into the gaming pc game now i believe this will be my next case less set up
Your videos is the one which attracted and inspire me to build a gaming rig, the builds you do are awesome... but i have one question, you make lots of pc rigs and test their thermal of the different cases so which is the best case among your builds and give the best thermal performance?
That's a tough one to answer. We have covered hundreds of cases.
I’m so early it’s awesome. Loving the content brother!
i'd love to get one of these !! always appreciate the knowledge !
Wish I had the $ for this its one of the best ones I've seen on the market.
Any idea if it can be wall mounted aswell with the legs against the wall??
Love it thanks for the walk through 👍
Hi Nick!
I am fairly new to the PC repair industry and really hope to find a great open-air test bench this year. Is this still good in 2024 or do you recommend anything else? I'm in the US so maybe I can source some alternatives here :D. Thanks in advance!
This is still the best open air case I reckon for sure! The quality is unmatched
Hi, I got this bench and just can't figure out how to install an arctic 420 mm liquid freezer on the top just above the cpu.I would have to do a pull configuration and I am not sure it is a good idea. Do you have any tips? Thanks!
That’s an interesting can opener.
It opens cans so good though hahaha!
Looks like your rad & fan mounting, is actually just a rad mounting. How is a naked fan mounted to this? Like a noctua?
I hope it actually has titanium in it!
sounds like a color
Indeed the full name is "Titanium Grey". The OBT Team looks at getting a REAL titanium version made but this is EXTREMLY complex... and costly! Maybe that will happen for a special project :D
I really wish that they beef up the pcie mounting. They should consider making a similar bracket to the psu one but to hold gpu and other pcie devices
Only thing missing is a hole behind the mobo to swap cooler easily
But you can just pull the board off
Wish the price was a little cheaper. :(
Damn, I really want one...but holy shit, the PRICE!!!
is that an ATX PSU ?
By any chance if anyone knows where to buy those toolless motherboard standoffs?
From the manufacturers at Streacom probably.
@@TonyC1968 ill try reaching out to em
What is "sfx psu mounting" ?
Small format power supply standard -SFX
Wow, looks cool, but $199 is quite expensive for a piece of metal...
I agree. I think I'll wait for the Steam Sale... :)
It is full aluminium and CNC, along side custom screws and standoffs. Metal knowck off are barely cheaper :)
(we are biased obviously!)
How do you turn on the computer lol
Watch the whole think
My cat would destroy the PC immedietly.
That'd be fun to watch lol!
So like is it a case or not? Im confused
Watch the video
Yeah Nah, Rather CNC mill my own test bench from G4 Titanium or billet stainless than throw away $274 AUD overseas
Most people don't have access to a CNC though
I am sure the Open Benchtable team would love to see it! You can get the Blueprint and 3D model!
Way way over priced for a small piece of machined aluminum!
Are there any washer out of box?Cause I look into the user guide of BC1.1 and find out that washer showed up under every screw,did they cancel all the washers of lastest version or something?
streacom.com/downloads/ug/bc1.1-1712.pdf