I use windex inside the grip. Once it dries the grips will not come off. Ive never had a grip come anywhere near coming off. No glue, No safety wire, No clear coat...Just windex. Hate all you want but thats how i do it and it always worked for me.
Thanks Lucas Oil...I bought some chainsaw 2 stroke oil yesterday and passed up all other brands for Lucas Oil...because you guys support what I like....Racing! Thanks, Brian
I tried the clear enamel and the end of the grip disintegrated and fell off. Seemed like it melted through the grip. I used very little spray and was using Pro Taper grips. Fastest $20 I have spent in a while.
You know the most important thing he says that he didn't emphasize. Right before he pushes the grip onto the bar, he squashes it "to remove as much air as possible". Some bars aren't open through the center so when you push the grip on you end up with a ton of air trapped and it just pushes the grip back out. You'll never be able to push the grip on all the way unless you poke a hole in the end of the grip. Or maybe next time I'll try this method.
Just regriped my bars using grip cement recently which doesn't need safety wire to hold it on. I like the idea of being able to easily remove and replace grips, but my grips stay on for long periods of time which might allow rust to build up on the safety wire. Is there a benefit to using spray paint and safety wire other than it being easier to remove and replace grips?
So use some clear coat spray paint to bond the grips to the bars? Also does it matter which side each grip goes on? or is there a grip for throttle and a grip for clutch side
Why cut through a perfectly good grip donut when you can pull it right off I understand cutting the grips but jeez, ill take them if you want to waste them
Paint doesn't work for shit! Comes loose and spins on the first ride even with four rings of safety wire... Use medium cure CA-Glue or Renthal Grip glue.
You've never had a grip come off when you've went to pull a wheelie obviously... Spray paint comes loose on the first ride even with four rings of safety wire, I use medium cure CA glue and four rings of safety wire... That's the only thing I've found that keeps the grips from spinning or sliding.
I use windex inside the grip. Once it dries the grips will not come off. Ive never had a grip come anywhere near coming off. No glue, No safety wire, No clear coat...Just windex. Hate all you want but thats how i do it and it always worked for me.
Foam winded or liquid windex
Thanks Lucas Oil...I bought some chainsaw 2 stroke oil yesterday and passed up all other brands for Lucas Oil...because you guys support what I like....Racing! Thanks, Brian
Hairspray works just as well.
I tried the clear enamel and the end of the grip disintegrated and fell off. Seemed like it melted through the grip. I used very little spray and was using Pro Taper grips. Fastest $20 I have spent in a while.
Hair spray works well too. Just not so awesome if you dunk the bike
Splash of gas into the grip works great never had good luck with paint if you don't replace your grips every 2 weeks wire just jacks em up
I also always tuck the end of the wire twist under the wire, after an errand twist end ruined my $40 fox gloves.
You know the most important thing he says that he didn't emphasize. Right before he pushes the grip onto the bar, he squashes it "to remove as much air as possible". Some bars aren't open through the center so when you push the grip on you end up with a ton of air trapped and it just pushes the grip back out. You'll never be able to push the grip on all the way unless you poke a hole in the end of the grip. Or maybe next time I'll try this method.
Just regriped my bars using grip cement recently which doesn't need safety wire to hold it on. I like the idea of being able to easily remove and replace grips, but my grips stay on for long periods of time which might allow rust to build up on the safety wire. Is there a benefit to using spray paint and safety wire other than it being easier to remove and replace grips?
This helped a lot THANK YOU
are the safety wires necessary for an atv grip considering there is much less twisting the grip?
They're is a bigger hole in the grip for the throttle side
Yes
Plasti dip worked for me
Good video man, someone now the name of the music is playing?
So use some clear coat spray paint to bond the grips to the bars? Also does it matter which side each grip goes on? or is there a grip for throttle and a grip for clutch side
All dirt bike grips will have a throttle side and clutch side
FLYGUY289 oops, never realized that :P how can you tell which side is whice?
***** Throttle side is bigger
***** And a bit thinner
why don't more people use the odi lock ons? theyre so much easier to install and never slip
Hard. Hate it.
They rip your hands apart that’s why
I tried the Pro-Taper clamp on grips and never could get the clutch side tight enough. Grip started to come off on first ride.
Now I see that he super glues the donut
is that just clearcoat ?
What kind of enamel or spray is that ??
Did no one notice that jessy nelson likes his grip donuts glued onto his grips? Thats why he just it off haha
Why no tips about indexing the waffles?
I love the look of the white grips but they get dirty way to fast
what kind of product is the white spray that he uses in the handle bar?
semen
clear enamel
1 cut the donuts?
2 when you pulled the safety wire out of the roll holder you cut it and left the other end go back in to the holder
He superglues the donuts to the grip so he's got to cut it off
Wire size?
The donut was good still and those grips looked 1 ride old
yea its called fukers wasting money that have money
The donut is superglued to the grip, he can't just slide it off. He mentioned it at the end of the video.
Why cut through a perfectly good grip donut when you can pull it right off I understand cutting the grips but jeez, ill take them if you want to waste them
If you watch the whole video you would know that at the end he says the rider prefers the donuts to be glued to the grip, thats why he cut it.
+Dynuhmyte ...........bc they get a thousand pairs for free from sponsors. These dudes change their grips, levers, etc all the time !!!!!!!!!!!!!!
SMS CUSTOMS bro this comment is from forever ago lol. Still wasting money
jobaeten I watched the whole video boss
+Dynuhmyte where do you live in a cardboard box?
Where can i get those nice pair of safety wire pliers
believe it or not, harbor freight has a decent pair of those, and pretty inexpensive. i think i payed like less than $15
Paint doesn't work for shit! Comes loose and spins on the first ride even with four rings of safety wire... Use medium cure CA-Glue or Renthal Grip glue.
Who uses white grips
crispy boiz
it not that easy to installing grips us dish soap before putting the grips on with spary paint and let it sit and it like butter to installing grips
you don't even need the safety wire ?????
I use spray paint and have never had a grip slide off on me or even come loose
pointless noew my bike has been stolen
what type?
what type of spray paint?? Clear coat is best, but any will do
You've never had a grip come off when you've went to pull a wheelie obviously... Spray paint comes loose on the first ride even with four rings of safety wire, I use medium cure CA glue and four rings of safety wire... That's the only thing I've found that keeps the grips from spinning or sliding.
Music Sounds like a porn flick
lol. girl hands
Girl hands 😆
Way to much air pressure
Everyone does it the hard way lol
Лучшие грипсы это грипсы с фиксатором ua-cam.com/video/7rh-N0bTQSE/v-deo.html&t=
I can't even get my new grips on more then half way.
Wire??are u serious?? This is just the wrong way to do everything
Any mechnak that diss' his rider is a tool. Never again
+Brandon Quenneville clearly joking.