2005-2020 Ford F250 F350 F450 F550 Simple Tear Down Super 60 Front Axle Locking Hub, Axle Shaft.
Вставка
- Опубліковано 8 вер 2024
- Get Your Dana Spicer Front Axle Parts From Our Website In The Links Below.
2005-2015 F250, F350, F450, F550 Super Duty. venturestruckp...
2016-2022 F250, F350, F450, F550 Super Duty.
venturestruckp...
Ventures Truck parts showing a simple process for removing locking hub, unit wheel bearing, and axles shaft on Fords Super 60 Dana Spicer Super duty front axle.
Super 60 Front Axle
Tools Needed
T27 Torx Bit
Long Snap Ring Pliers
5/16 Or 8MM Socket
13/16 Or 21 MM Socket
Hammer
Crowbar / Prybar
Questions? Give us a call.
1800-464-1713
www.venturestruckparts.com
Great video on this teardown there are so many terrible videos of people that don't know what they're doing.
A great video! most important point is you need the proper long reach snap ring tool, if you don't have it don't do it, you will have a bad day. Knipex makes a good one.
Knipex 4611A3 works great!
Nice breakdown off the truck. Gotta like those steel workbenches too.
Great Content.
Great video
Nice video. Obviously knows what he's doing. Thanks for a useful video!
good finformation here.
lead tech here. havent had enough experience with acle seals and bearings on the dana 60 front. alldata states its nonserviceable. in translation is it is my job to service., & i am own my own.
-jesse
Thanks mate
amazing video brotha!!!!
The only thing I could see wrong was the last 3 items left on the table u didn’t show on the axel itself where it would sit
Please see the video link in this comment for that information.ua-cam.com/video/uVmSMgITluc/v-deo.html
what is the part name of what comes next if you keep going farther? would love a full breakdown
What snap ring pliers are those?
Thanks so much for this. Super helpful!
it would be easier to use a center punch on the hub bolts
Couldn’t you leave the hub on the axle shaft and remove them both at the same time?
Hi loved your video...
Can you take the axle housing apart?
Awesome video.
I need to replace ball joints... thus the knuckle needs to come off. do I need to replace the axle seals if I do that? They work fine and we’re replaced recently.
Here is our video for earlier trucks. but the concept is the same. ua-cam.com/video/f1BG70VKRPg/v-deo.html
On my 2010 F250 the left side c clip that you have to remove after taking of the locking hub is broken. Do you have any suggestions on how to remove it? I’ve tried using screwdrivers but that thing has a lot of tension on it. Any idea is helpful.
How do you get the radius arm bushings out of the axle?
Would you have the part numbers for those seals ?
Please see the video description for a link to all of the seals in this video.
Hello, wonderful man. Please tell me the weight of this bridge. Can not find. Thank good luck
I do not know what you mean by bridge....
@@VenturesTruckParts? I am lost
In Russian, axle is translated to bridge.
I am sorry i do not know the exact weight. ball park i would guess is between 500 and 600 pounds
What u joints come in a 2021 ford dana 60?
venturestruckparts.com/product/2016-2019-ford-f250-f350-superduty-front-4x4-axle-shaft-greaseable-u-joints-2ea/
venturestruckparts.com/product/front-axle-shaft-u-joint-greasable-ford-f250-f350-2016-2019-oem-dana-spicer/
...so, where's the axle install????
It's reverse of removal my friend. Unless you mean the seal
What a complicated axle, too many things to fail.