Fixing Everything WRONG With My F100 & Now it's FAST!
Вставка
- Опубліковано 28 вер 2024
- GRAB YOUR F100 MERCH HERE!
SHOP NOW: www.nineonines...
-
-F100 Wings HERE:
www.cerbinator...
-
AGM Products "JACKROD" :
agm-products.c...
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...
SMALL BLOCK KILLER SHIRTS ARE BACK! Shop here! www.NineONineSpeedCompany.com
im liking the idea of amber for the wing to tie in with the amber headlights
Hey craig have u thought bout sanderson headers u dont ever need a gasket they make them so tight u never need a gasket
@Thecraig909 Awesome, love seeing the F100! The song played in the background while testing out the jack and also played again at the very end of the video...please, what is it? Its living in my head rent free and I cant evict it! My shazam and google apple tunes ID cant find it. by the way, loving the WE2050 group you have been rocking and recommended, golden! I'll even buy you lunch for your time bro!
Watching Craig fix everything wrong with his F100 vs actually fixing everything wrong with my F100
Literally procrastinating hard rn
@@nickdowding5244 it’s still cold where I live. That’s my excuse
Same dude 😆
@@flipflopsgarage I have had my headers since the start of the Iowan Christmas, it is still too cold to put them on
Basically 😂
Dude if you let the wing flash rust and paint some white on it and clear it it would look rad with the rest of the truck!
Okay Craig, I love the F100. Love the Fox Body, the VW I'm okay with. Where are the GALAXIES!?!?!? LOL 😂😂😂
Digging the rear spoiler. I’m working on a 71 F100 myself. I’d like to do a bolt on front spoiler under the bumper.
If you want to really put an end to header problems you need to get some with thicker flanges. The thickest I know of is L&L, 1/2" flange.
Black wing or make it look rustic like the rest of the truck love the build been watching u build this truck since day one
The video of you doing the headliner is what made me start to follow your channel. I also bought a truck afterwards because of you. 👍🏽
Funny watching from the floor view. Either floor flexing or big air leak between carpet and shifter. Was waiting for carpet to fly away 😂😂😂😂
Craig! That thing is WICKED!!! You should also check out a set of copper header gaskets! They're the last gasket you'll ever need! Idk how they compare to the Remflex gaskets, but they're a single piece of copper sheet cut into the proper shape, and they sealed up the SUPER warped exhaust manifolds on my efi 460 when nothing else could!
On the leaking header issue. I believe your composite gasket is only part of the issue. The other part is the header itself. Cheaper headers use a 3/8in flange where as a better quality one would use a 1/2in thick flange. As the Cheaper header heats up it expands more and faster then an 1/2in flanged one. Plus it will warp faster thus creating a path for a leak. The 1/2in thick one will stay flatter under all your heat cycles (aka- 2 step) 😅 I've had to replace a few gaskets on my 1990 5.0 bronco and it was all stock with direct fit manifold replacement headers. And it had a 3/8 in flange as well. So a good MLS gasket and a better header with a 1/2in flange should "solve" your issue. Oh I've also heard some people use ultra high temp silicon ( the one with copper mixed in it) to help "glue" the gasket to the header and head so the composite gasket can seal better and move with the header reducing the change of a leak for a "temporary" fix
Greg you must skim your headers to make it flat and true. Then you spray copper gasket on your header gasket and bolt it on
This my favorite truck on UA-cam
Craig what's going with the Galaxy, I want to see these cars on the channel
One problem with blowing out header gaskets, is your header flanges look to be 3/8 or 7/16. The thin flanges warp over time. Get some good headers with thicker flanges and your problem will go away…
Hey guys! My brother has a 62 2 door Ford Fairlane with a 351 windser and man she rips! Love the vids keep up the good work
That exhaust is so sick I love it
That Cerbinator Spoiler is Sick!! So stoked you got that badboy installed 😮💨😮💨😮💨
That Cerbinator logo is pretty sick as well! Whoever designed it is pretty talented!
I use a brass or copper gasket on my 347 stroker and have never had any problems
If your not gonna paint the truck might aswell let the wing get some surface rust. Or spot paint it the same color of your truck and then let some spots rust to give it a patina look
This is off topic, but camera are you recording with? The video quality is just awesome!
You don't even need 400HP. I think to this day the mkost fun car i've ever driven was a cammed and slighty machined head MGB. prbably barely touched 100HP. Also, I second the Remflex gasket recomendation , they're graphite. I dont know if they'll hold up to your beastly motor at the redline though. They do work great in my stock 6200 RPM redline 5.0 with AFR heads though for what that's worth.
I could drive around listening to this all day. Best band in the world
Try copper header gaskets.
one of the best sounding trucks on yt
Need to post if you're bringing the F100 to Cruising grand this year, I gotta hear it in person.
have you tried to have the headers surface machined flat. I have seen that being a problem before.
Speaking of Paint, Were is the Galaxie? What happened to the Build?
Make a short of this thing rippin !!!
It would be cool to find a decent painter that could patina match the wing to the truck
How come you never show the old Galaxie you were building? Did you get rid of it?
he said he wont be showing it till its done, he is still working on it
Which one? The Red one or the other one 🤔🤣
@@MavenFade white one first, then red. in one of his videos he was talking about not showing them till where finished or something like that. dont remember but it was sometime between the last paint video on the galaxy and now.
Really like the Aero Racing wheels.
Brake fluid is capable of stripping paint so if it really did spill into the carpet I would take the carpet out and fully clean it up. Trying to clean it up from the top is wishful thinking IMO. Thankfully beating on it while not running right didn't result in getting blown up part 2. Still sounds freaking amazing!
Mega difference in sound tone after the filter/ tuneup! Nice work sir! and yes I have a habit of commenting my way through videos till the end haha.
If u place alittle gasket maker on header gaskets before u install that may stop your leak after u get your headers milled so they are flat think they maybe alittle worpped
A wee bit of a tick going on there
Copper header gaskets with lock washers on the bolts 👌
What size tires and rims are those
I run seal-4-gold aluminum gasket in my big block never had any problems with them and there reusable
Kerb antenna now mate😅,thought you had a sun visor,that would be cool,better paint match wing😅,never watched a channel that does so little😊
Get some Rimflex header gasket you won't regret it
Your truck sounds amazing dude. What engine did you put in it? It upsets me that I can't figure it out...
Go watch the playlist
Thiker header flanges could help
Remflex gaskets, get em
Man I love this truck!!!
Brake ducts and hoses (race car look)
I’m hoping one day that you get sick of patina and restore the body(s) to better than new with sweet paint.🙏🏻
It sounded like to either had a header leak or plug wire off after you changed the header gasket and before the two step.
You need to change the channel to Over Rev garage
use red rtv without a gasket
Did anyone know the size of his Hoosier tires set ?? :)
should do the wing in amber yellow
Why is the shop so empty?
Love your videos Craig
You should put a tonneau cover on the f100
Thought it was going to be a cab visor
14:52 some feet content there
Paint the wing to match the truck.
Sorry Qweg, that spoiler is the spoiler, wrecked the vibe of the truck. What's next a windshield visor and bolt on hood scoop.
It appears in the opening video shot the other guy you shared shop space ran away never to be seen after all the unnecessary loud engine revving by Craig.
I love your vids man keep that shit up
What motor is in it?
Custom small block
You’re the man 🎉🎉🎉🎉🎉
Me: sees the loud af warning
Also me: *turns headphones all the way up*
😎🏴☠️
If I order something are you going to cancel it again?
Love the way the shift boot thingy is not mounted to the floor.... 😂
Autolites are garbage, you need ngk’s
The Ford guys think nothing else will work in a ford but autolites.
How much for it, I’ll bring all cash
I went to the website, and it is listed as a spoiler not a wing, 2 different things. Nascar wing was the Dodge Daytona or Plymouth Superbird. 675 bucks for a flat piece of steel and 4 CNC anodized brackets, what a con job, maybe it's the stainless hardware... NOPE. You put it on because it was free from your buddy for free advertisement on your channel. You could have made one for 50 bucks, looks dumb anyway, not worth drilling holes in the tailgate.
You say 430 like that's bad lol that's na? Chill
ngl, this channel had me when ‘mater got her pipes. Then she nearly died. 🫶🏻
Liked the way Craig has to stop talking when another version of himself drives by with loud exhaust. " Nice". 😂😂😂
Any updates on the galaxies?
With that wing being steel, it would look cool to let it rust and match the rest of the truck
Listen- 80% of us are here for the truck😂so post more of railing it
Why do you have all those wires showing near the pedals? You usually clean them up
I think it would look good if you made that wing match the white and rust on the truck or just rusty. But that’s just me 🤷🏻♂️ lol
Spoiler looks great, i put one of his spoilers on my foxbody back in 2016
Thank you!! for saying that you don't need 700 HP to have fun in a road vehicle.
Dude every car you have has a POS paint job. you have a killer motor so why not give it a nice paint job?
After what I’m dealing with with painting the galaxie. I’ll pass lol.
The Cerbinator wing is awesome. I've wanted to get one for my Fox Vert since he started making them. I'm glad I didn't get one then because now he has a center cut version as well, I'll get that one someday!
I have the center-cut on my 92 Notch ua-cam.com/video/i5p8oD2Nr6w/v-deo.htmlsi=EHG6vYn2eUVbcVOQ
the boy cerbinator doing big things!!!! cant wait for the foxbody 3 pc spoiler hes making
I have the center-cut on my 92 Notch ua-cam.com/video/i5p8oD2Nr6w/v-deo.htmlsi=EHG6vYn2eUVbcVOQ
14:31. I love the ventilation in the floor…you should cut a hole in the floor and make that a crotch vent😂
Craig, I will give you $7 cash money to bring this truck to the F-100 show in Tennessee next month... seriously though this is probably one of my favorite individual trucks on the face of the planet and I would love to see it in person. And I will give you $7.
Bruhhhhh you have GOT to color match that wing!!!! Faux patina on it too!!!!
Man I miss my 20s. that thing is way to loud for me now lol. In 10 -15 years we are gonna be watching you make multiple videos trying to quiet this truck lol
Words can’t explain how nasty this truck is, I look forward to the day I see it in person!
Question, the amber headlights, is that a film (if so what brand) or is it the lens (if so what brand)
Keep these bad ass videos coming please
I’m quite a bit older than you, and I like what you do, but constantly revving on the rev limiter is damaging to your engine, and annoying to us old school hot rodders. Not cool. And no wonder why you go through so many engines. Chill and have fun, but always on your limiter is stupid.
Hey Craig. I’m sure you already know this but brake fluid will eat and rust metal. If I were you I would pull the carpet out of the truck and power wash it and clean the floor pan real good so it doesn’t rust.
You need to paint this truck and coat that bed.Matt black on the hood,pillars and roof.Sides below the pillars white or some other nice contrasting color ,perhaps nardo grey ….
Without a bed cover,that wing is useless other than for looks,just saying least wouldnt have to look at all the bed rust.yeah i know the patina thing.to each his own.snooky pa😊😊
Make sure to get a cover for the bed, the wing won’t be fully functional due to a negative pressure zone inside the bed
So now that it has a wing how long till he kills the truck with a paint job I hope he never does but hey if he does I will not judge truck has been the main star of the channel and I’m sure it would look great in a fresh coat of Wimbledon white
Those header flanges are probably warped, try doubling up the felpro gaskets.
Have you tried Copper gaskets
Man basically has my dream second truck my daily an 89 ranger cause the mileage is awesome
If that was break fluid that spilt you need to get that carpet out and clean the metal. It will rust quick.
Waiting for the day for the return of both galaxies projects u started.
Need an episode now putting a splitter on,then another episode taking it off😅
Where did you find 5x5.5 aero wheels, or did you do 5x5 adapters?
Warning you're running too lean that's why the fire is flying out of your pipes