How To Make A Double Macrame Plant Holder (DIY Tutorial!)

Поділитися
Вставка
  • Опубліковано 18 січ 2025

КОМЕНТАРІ • 40

  • @xsprlmnl
    @xsprlmnl Рік тому +16

    I literally made this from ground zero level knowledge on macrame lol. Thanks for being this newbie-friendly

  • @empressptah4515
    @empressptah4515 2 місяці тому +1

    You are honestly the best teacher at this❤ thank you!😊

  • @tlojewelrylove
    @tlojewelrylove 3 місяці тому

    Omg... this is awesome! 👍 😃 I KNEW I would need LOTS of rope but I never imagined I'd need roughly 129 ft +/- for my "Double Decker"!! Thankfully, I have extra rope. 😃 I commented on another of your videos that I wanted to "figure out" how to make a "Double Decker" plant hanger for a potted ivy and a stand-up Ring Camera for deer watching. With this tutorial, you've relieved me of the guesswork. Also, I'd been considering not using a wooden ring but I wasn't sure of the best way to achieve it. Thank you very much for this lovely tutorial! 🙏♥️👍

  • @NRGFASHIONDESIGNS
    @NRGFASHIONDESIGNS Рік тому +4

    I've never done macrame before and I'm thrilled with the result! thank you for a very straight forward and easy to follow tutorial :)

    • @almacintron8016
      @almacintron8016 Рік тому

      Hi! Did you make it with the same measurements, than she made it?. What is the finished length of the hanger? Because will be the first time than I make it, and I don't want to the hanger be long. Sorry for my English. 😁

  • @jennifert4189
    @jennifert4189 Рік тому +1

    Keep coming back to this tutorial. each time i make a plant hanger like this its getting better, Thank you for this tutorial :)

  • @tlojewelrylove
    @tlojewelrylove 3 місяці тому +1

    One question... How long does it hang when YOUR plants are in it? I ESPECIALLY want to know how far the top plant hangs down from the top hanging loop because I want to put a camera in the top pot and I also want to know how far the entire hanger hangs with both plants you've put in it. Thank you very much! 🙏♥️👍

  • @twotitsa
    @twotitsa 2 роки тому +6

    Thank you. Greetings from Kiev. I relieve stress by doing macrame.

  • @keithcheeseman567
    @keithcheeseman567 Рік тому +1

    Perfectly shown and explained, thank you. I love it!

  • @frampgirl
    @frampgirl Рік тому

    so fun! my first try and immensely easier than the downloaded plans I bought from another site.

  • @angelajohnson5807
    @angelajohnson5807 11 місяців тому +1

    Justbwhatbi was looking for! Perfect. Thank you

  • @bunaynayslay
    @bunaynayslay Рік тому

    Fabulous tutorial, I followed it exactly minus adding beads, I'm so happy with the final result! I am also new to macrame, I look forward to buying some patterns and your tutorials ☺️

  • @RatRandomness
    @RatRandomness 2 роки тому +5

    What is the finished length of the hanger?

  • @inescruz1769
    @inescruz1769 8 місяців тому +1

    What’s the length of the hanger when finished?

  • @BerylGraddy
    @BerylGraddy 9 місяців тому +1

    It was great you went through the whole thing

  • @joanieboyne2619
    @joanieboyne2619 2 роки тому +2

    What ceiling hangers do you recommend? I'm always terrified they will fall down.

    • @MarchingNorth
      @MarchingNorth  2 роки тому +1

      I don’t have any ceiling hangers at the moment, so I can’t be much help with that, sorry! I have wall brackets that I hang my plant hangers on, and I hang them from the curtain rod in front of the windows as well.

  • @tianarothenberger9465
    @tianarothenberger9465 2 роки тому +2

    can you tell me the total length of this macrame hanger?

  • @AlyssaPickett-p6w
    @AlyssaPickett-p6w Рік тому

    I have 4mm cord, will that make a difference in the length I need to cut the strands? (I am just beginning) Also If we were to just make this one for a single plant how long would be cut the strands? Thank you :)

  • @emmahimebaugh276
    @emmahimebaugh276 Рік тому

    How long do they need to be ?

  • @lauras6800
    @lauras6800 5 місяців тому

    Whats the lenght of the finished hanger?

  • @nicolacarter5277
    @nicolacarter5277 2 роки тому +1

    Love this!😍

  • @katelove71420
    @katelove71420 2 роки тому +1

    could you makes this into a triple plant hanger?

  • @brianmaytum8519
    @brianmaytum8519 2 роки тому +1

    Love this! 🥰💞

  • @divinityinspires
    @divinityinspires Рік тому +1

    Macrame Angel wings nexttttx🩵♡🥰🔥

  • @KnotArtStore-24
    @KnotArtStore-24 5 місяців тому

    total length please?

  • @sensidima9822
    @sensidima9822 Рік тому

    I don’t understand how do you get 4 sections of 4 cords with 12 strands?

    • @melodymanson6595
      @melodymanson6595 Рік тому

      12 divided by 4 =4

    • @helenwilson7211
      @helenwilson7211 Рік тому

      my question too. I started this today and now have to undo it because I can't have 4 lots of 4 when I start with 12, bummer. Will have to find a better tutorial.

    • @helenwilson7211
      @helenwilson7211 Рік тому

      No it is my mistake! I must have missed two lenghts of cord! Bother, time to start over.

    • @sensidima9822
      @sensidima9822 Рік тому +1

      @@melodymanson6595 12 divided by 4=3

  • @cythcy
    @cythcy 2 роки тому

    Thanks

  • @pamulasmith756
    @pamulasmith756 Рік тому +1

    how long do you make your cords to start with. none of your tutorials tell this information

  • @gordanabobovcan1459
    @gordanabobovcan1459 2 роки тому

    Great but you don't tell us how long the cordes must be 🤦🏻‍♀️

  • @antonshkabara3090
    @antonshkabara3090 2 роки тому

    I have done very similar with Woodglut designs.

  • @Aaakeith
    @Aaakeith 2 роки тому

    If I wanted to make this exact design but for only one plant, what lengths would I use? I tried watching your single plant hanger video but I need to make the macramed handle too and that one uses a wood ring 🥲