Setting the failsafe would be nice, with range checking a really good number two. I have a Orange module for my turniqy 9RX and I haven't been able to find any information about how to do range checking (without taking my radio in my car and drive for a mile and call home to get someone to check my model for activity :-/)
Hi, I have just returned to model making after my retirement, I have a HobbyKing Orx T-6. Everything works fine EXCEPT the ailerons. The right-hand control has no effect on the ailerons on the monitor the pointer does not move. I must have at some time made an adjustment that has affected this. Please can you advise how to return this to travel left and righthand. I hope someone can help with this. the local hobby shop is not keen to help because I purchased this from HobbyKing.
+HobbyKing Live Do you know the binding process for the Orange CF720X FC/RX combo? I tried to use this video and simply replaced the binding plug process with holding the bind button on the unit and the RX light stopped blinking like it was bound, but when I loaded up the Cleanflight Configurator, I don't see any receiver input.
is it possible to conect the orange rx t-six to a inductrix or a tiny whoop? i m a beginner on this hobby and i dont know the trasmitter i have to choose but i think this one adapts to my needs can you help me?
i bought a new orx TX10i and it binds ok with R620 Receivers, but then the servos just jitter like crazy and the controls don't work. Tries thee different planes (same rx type) same thing. Can"t find anything to fix it. Any ideas?
Hello I'm building a 250 racing quad and i have a problem could any one help. So hears the problem its my first build and i bought a receiver called Fr sky D4R2 and my first transmitter a Orange RX T6 2.4 GHz. And well the issue is that i can't get the two of them to bind. i would like to know if its possible and or how to fix it thanks
Brought brand new orange t6 and umx radian.2021. They won't bind??? Bat on plane,tx on with bind switch on..same fast flash on plane...???? PLEASE HELP!!!!
+MangLung Cheuk Do your controls work? Is this after you disconnect and re-power the system? If so, you are doing it too quickly and the slow flashing light means it sensed a brown out, even though there wasn't.
+HobbyKing Live Thanks for your reply. I tried many times, but instead of solid light, it goes to slow flashing after a pause (i.e.light goes off for a second).
You do not require an ESC to operate a gas engine,you have a carb and a throttle arm to link to a servo for that purpose to throttle the engine,ESC is a speed controller for an electric powered aircraft.
gday hobbyking would you guys be able to make a video of how to bind the orange transmitter to a little flyer called the hermit 145 from oversky im at my ends trying to do this please any help would be so appreciated please help me get him in the air hobbyking ..thankyou guys at hobbyking oh yer the reciever is intergrated into the fc .again thankyou
hey I know this is kinda irrelevant, but every time I turn on my prayers controller, it starts rapidly beeping and won't shut the hell up. can someone please help me?
Awesome video! Can't wait to see more of this series.
The failsafe and the satellite receiver are excellent choices for bench tips!
Hey Max- how about a follow up on Orange sat binding maybe?
Setting the failsafe would be nice, with range checking a really good number two. I have a Orange module for my turniqy 9RX and I haven't been able to find any information about how to do range checking (without taking my radio in my car and drive for a mile and call home to get someone to check my model for activity :-/)
How about setting the failsafe?
Don't forget about range checking before the first flight ;-)
Hi, I have just returned to model making after my retirement, I have a HobbyKing Orx T-6.
Everything works fine EXCEPT the ailerons. The right-hand control has no effect on the
ailerons on the monitor the pointer does not move. I must have at some time made an adjustment that
has affected this. Please can you advise how to return this to travel left and righthand.
I hope someone can help with this. the local hobby shop is not keen to help because I purchased this from HobbyKing.
Hi what kinda battery pack did you use for this video ? AA or AAA ?
Can u guy explain me how to connect the receiver with any kind multi rotor control broad and also explain about the controls board as well?
When will you guys get ORANGE receivers in STOCK again, please?
+HobbyKing Live Do you know the binding process for the Orange CF720X FC/RX combo? I tried to use this video and simply replaced the binding plug process with holding the bind button on the unit and the RX light stopped blinking like it was bound, but when I loaded up the Cleanflight Configurator, I don't see any receiver input.
Is the T-six better or the Ti-8?
my transmitter doesn't complete binding. always beeping and screen shows "BIND", what may i do?
try and redo the binding process and when you press and hold the trainer switch wait for it to stop beeping and make one long beep and let go
is it possible to conect the orange rx t-six to a inductrix or a tiny whoop? i m a beginner on this hobby and i dont know the trasmitter i have to choose but i think this one adapts to my needs can you help me?
Does it work the same way if I want to bind it with other DSMX recievers?
Can you use this receiver with syma x8c? how to bind them?
Sir, I own ORX DSM2 T6 transmitter, pl tell me how I could use it as a SIMULATOR transmitter.
i bought a new orx TX10i and it binds ok with R620 Receivers, but then the servos just jitter like crazy and the controls don't work. Tries thee different planes (same rx type) same thing. Can"t find anything to fix it. Any ideas?
same receivers, but different servos, esc's ..all the same problem
Hey how would you cennect this to a controller
what happened to weekly updates
when I put the bind plug In it doesn't flash quickly how do you fix this.
try to find a vid on how to set up orx for a quad any help would be awesome
+Ethan Moen What do you need help with?
Hello I'm building a 250 racing quad and i have a problem could any one help.
So hears the problem its my first build and i bought a receiver called Fr sky D4R2 and my first transmitter a Orange RX T6 2.4 GHz. And well the issue is that i can't get the two of them to bind. i would like to know if its possible and or how to fix it thanks
Brought brand new orange t6 and umx radian.2021.
They won't bind???
Bat on plane,tx on with bind switch on..same fast flash on plane...???? PLEASE HELP!!!!
Sorry to hear about this. Please contact us here support.hobbyking.com/hc/en-us/requests/new so we can help. Thanks for bringing this to our attention
i have my 450 quad and robocat 28, both of them using 6ch orange RX... when i use each of them i always bind and bind... please help
+Jay-ar Paringit Are you using separate models?
Can I use SAFE mode with this transmitter?
Did you find out how to use safe
does the orange t6 bind with frsky recivers??
Ishaan Kulkarni
No. Different protocol
I got a slowly flashing light after binding, anyone know what that means?? I am using Orangerx 920x v2, with orange RX T-six transmitter.
+MangLung Cheuk Do your controls work? Is this after you disconnect and re-power the system? If so, you are doing it too quickly and the slow flashing light means it sensed a brown out, even though there wasn't.
+HobbyKing Live Thanks for your reply. I tried many times, but instead of solid light, it goes to slow flashing after a pause (i.e.light goes off for a second).
Can onyone please tell how is a 30cc gas engine connected to the receiver in an rc plane?
Is an esc required?
Please tell me all the components
You do not require an ESC to operate a gas engine,you have a carb and a throttle arm to link to a servo for that purpose to throttle the engine,ESC is a speed controller for an electric powered aircraft.
Can the new 10 i vine with safe
Bind with safe
Please please please show this to charlie chimples
chopperharly No he needs a Failsafe tutorial. ;-)
yes he could do with lots of tutorials bless him for keeping us all entertained, And Its funny how everyone knows who im talking about
gday hobbyking would you guys be able to make a video of how to bind the orange transmitter to a little flyer called the hermit 145 from oversky im at my ends trying to do this please any help would be so appreciated please help me get him in the air hobbyking ..thankyou guys at hobbyking oh yer the reciever is intergrated into the fc .again thankyou
hey I know this is kinda irrelevant, but every time I turn on my prayers controller, it starts rapidly beeping and won't shut the hell up. can someone please help me?
throttle down
Does it bind forever?
maybe get another type of receiver? Theres to many complainants
No prob
what flight controller do u use??
Do u know any good ppm receivers?
i need another one for my quad
as a receiver
???
To a battle bot
Can you use other transmitters with the receiver?
Its working with AS3X with dsmx spektrum?
How do u bind the orange t6 to frsky recivers?