To test the motor alone [without load], just put 12VDC will do. Generally speaking, new motor will be able to turn from 9vdc. At this voltage, the motor will initially jerk and then run very silent when turning. To test the motor with load, you will need the rectified 200VDC.
I really enjoy your videos and they have been invaluable. I have Saeco xsmall that keeps stopping with a coffee grounds empty error message. But the coffee grounds are not empty. The grinder appears to grind the coffee well. I replaced the HAL sensor but the problem keeps occurring. I have also cleaned the grinder (have not taking it apart completely). Do you have any ideas? Thank you.
Здрасти, някакви идеи защо не може да запамети дължината на кафето? Следвам инструкциите, но всеки бутон изпълнява настройките зададени в менюто, а не тези от програмираната дължина. За Saeco Exprelia става дума.
Very informative video. Your videos are very much appreciated! Keep up the good work
Can you tell me where to purchase the plastic gears shown invade at 8:48?
A vid showing how to remove the burrs would be great 👍
To test the motor alone [without load], just put 12VDC will do. Generally speaking, new motor will be able to turn from 9vdc. At this voltage, the motor will initially jerk and then run very silent when turning. To test the motor with load, you will need the rectified 200VDC.
My Jura F70 is grindig slow, amost stops for a millisecond. Could it be the brushes? Or full motor is bad?
Hello, thank you for this useful video. I would like to know where you can buy such a motor, it seems hard to find. Thank you.
I really enjoy your videos and they have been invaluable. I have Saeco xsmall that keeps stopping with a coffee grounds empty error message. But the coffee grounds are not empty. The grinder appears to grind the coffee well. I replaced the HAL sensor but the problem keeps occurring. I have also cleaned the grinder (have not taking it apart completely). Do you have any ideas? Thank you.
Здрасти, някакви идеи защо не може да запамети дължината на кафето? Следвам инструкциите, но всеки бутон изпълнява настройките зададени в менюто, а не тези от програмираната дължина. За Saeco Exprelia става дума.