Garbage Disposal Not Working - 5 Easy Things To Check and How to Fix It
Вставка
- Опубліковано 25 лип 2024
- How to fix a garbage disposal. Is your garbage disposal not working? If yours is not working at all with no sound, quit running, is only humming, jammed, no power, or got stuck - this video is for you! There are 5 easy things you can do and check yourself that will only take a few minutes of your time. I go over what to check and how to fix it in each scenario. Before you call the repair guy or replace the garbage disposal, try going through the list of 5 things and your problem very well may be solved along the way. I go over the reset button, spinning it manually with a wrench, how to look at the impellers for a jam, looking for a tripped GFI, and if all else fails, try the good ole smacking approach.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
For More Repair Videos:
🔌 Dryer Repair Playlist:
• Dryer Playlist
🧺 Washer Repair Playlist:
• Washer Playlist
🔥 Furnace Repair Playlist:
• Furnace Playlist
❄️ AC Repair Playlist:
• Air Conditioner Playlist
🛠️ HVAC Tools Playlist:
• HVAC Tools
🔋 Capacitor Playlist:
• Capacitor Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔦 Awesome Camo Flashlight:
amzn.to/33uMECU
🛒 For a Complete List of Tools and Parts Visit my Amazon Page:
amzn.to/2Q3QTOA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🅿️ If you want to support the channel:
paypal.me/WordofAdviceTV
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📷 Interested in What Gear I use to Film my Videos?
Sony A7SIII:
amzn.to/3oqIGDC
Sigma 24-70mm Lens:
amzn.to/3t9ZYID
GoPro HERO 8:
amzn.to/2Pi0JQO
Extra Batteries:
amzn.to/3c8QBj1
Memory Card (2):
amzn.to/34rcwQ1
60" Tripod:
amzn.to/2mLXrU0
Bird-Eye View Tripod:
amzn.to/3b3RWYy
Rode VideoMicro Microphone:
amzn.to/2Ol9KDp
Rode Wireless Go Microphone:
amzn.to/3ed5Wkv
Neewer Halo Light (2):
amzn.to/2LTANUK
Viltrox LED Light Panel:
amzn.to/39ZbSu4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙏 We would greatly appreciate it if you considered supporting our channel while shopping on Amazon by buying anything you need on Amazon after clicking on one of the links above. This gives us a small commission at no additional cost to you and helps us continue producing more videos! Thanks a million for your support!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
This video is for educational purposes. All appliance and HVAC repair work should be done by a trained professional. Word of Advice TV is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs:
Would you like to partner with Word of Advice TV? 🤝
Email: WordofAdviceTV@gmail.com ✍️
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#garbagedisposal #garbagedisposalnotworking #garbagedisposalcleaning #wordofadvicetv
The tapping method ...using a screwdriver inside of disposal from sink...WORKED !!!!!!! thank you thank you thank you thank you !!!!!!!
It worked for me as well. So grateful for the video. :)
I love this guy! He's fast, gets to the point, articulate, and easy to understand. I wish he did EVERY troubleshooting video I ever needed to watch!
You absolutely saved me hundred dollars to hire a plumber to replace a new disposal! Your manually spinning the disposal solved my problem.
Saved my life with the allen wrench! Thank you
Thanks, twisting Allen wrench worked. I spun the grinders as well. Such. Clear teaching!
You’re a life saver. I had to leave a comment. I tried the reset it didn’t work. Than the tool that didn’t work. Thank the screw driver technique and by the Grace of God it worked! Thank you so much for your knowledge.
Yes to the hammer technique! Works on several appliances. -My parents used to smack the top or side of the tv with their palm when I was a kid 1,000 years ago lol.
The hammer tap WORKED!!!!! Is this magic??!
Hello Jay, you are really number one, for past 3 months I was checking all appliances videos to learn how to fix problems, today I saw your videos, you are the best, you are number One, so Thank you so much for your kindly talking and making easy to understand, I really priciest your time
Thank you so much for making this video. My son and I just fixed ours. My son broke a glass while doing dishes. Ton of mini glasses fell to to disposable and they jammed it. First, I used a tong to pick up all the little glasses that I could see. However, it’s still not working. Then my son followed your instructions and used a wrench to loosen the grinder. After a few times back and forth the disposal works again. You just saved us a few hundred bucks. We can’t appreciate you enough. Thank you very much again.
So glad I saw this video before calling my home warranty service! I was able to get my garbage disposal to work by following your method of removing a piece of plastic lodged near one of the blades 👏🏾👏🏾👏🏾
Thank you very much, I loosen the disposal via the Allen wrench and resettled the button at the bottom and Voila is now working.
The tapping with the hammer totally worked. I think our it's on its way out, but until we can budget for a new replacement, we'll take what we can get. Thank you for this helpful video. Just saved us a lot of money for having an "expert" do the same thing and charge us $$$$
Can't believe it... I tried the first four methods and nothing happened. Was about to give up and click off the video, but then you suggested hitting the disposal with a hammer... and, of course, it worked. Wild.
Bro this totally worked. I hit the reset button and used the Allen wrench and it worked!!!! Thanks for saving me $200
1/4" wrench to break it free was the trick. Thanks!!
You really saved our garbage disposal and the $😮. Hammer technique worked like a charm. I really appreciate your help! Knowledge is power 💯
7/14/23. I tried everything and I was planning on heading over to Lowe’s and I just happened to see this additional video which suggested the hammer technique. I tapped it around pretty hard around the outside at the level where the disc turns and guess what? It worked! Thank you sir, saved me some cash.
Yay! Thank you so much. The allen wrench technique saved the day. The garbage disposal is now working🙂
Thank you so much for the awesome content. I love your videos. You and I have one thing in common, a four year old.
One tip: wear rubber gloves when reaching inside the garbage disposal.
The last time I was able to bang a device and get it to work was our Hitachi TV in the 1980s.
Thank you , the 3rd option using 1/4 inch allen wrench underneath the disposal did the trick and saved me from buying a new machine as well as paying someone to assess and do the same thing. Thank you :)
I was able to find my issue because of your video. Thank you!
I just want to say thank you so much for sharing these info. Thank you.
Thank you so much. Didn’t think about the GFI plug. Found one that was tripped. Saved a plumber bill 😊
Just saved me 450 in 30 seconds .. u a real goat
Dude thank you so much your a lifesaver
you saved a service call! thanks bud
Disposal had not been used in a long time. Allen wrench worked like a charm! Thanks.
Thank you! I was able to get my garbage disposal working 💪
Wow the tapping method was the one that finally worked. Had tried everything else.
thanks so much! the allen wrench worked - was bound up and now works. Saved me a plumber bill!
Great video! Straight to the point, helpful visuals paired with clear articulation of possible problems. Thank you!
Thank you so much for the advice! The allen wrench worked but mine was very hard to turn. I sprayed some WD-40 in the disposal and now it moves freely! You saved me a plumber call!
Worked number 4!! Thanks so much. I saved $75 ❤❤❤😊😊
Happy to hear that! You're welcome!
Tried everything. Thought it was beyond repair. Then used the hammer method. Something came loose and now it is fine. Thank you so much.
the reset button and spinning with wrench fixed it for me - thanks man !👍
Thank you. Got my disposal working thanks to you!
Thank you! Thank you!! Thank you!!!!!This saved me at 1 in the morning. It was the Allen wrench spinning the blades that did the trick!
Holy smokes, this totally worked! Had no idea about the Allen key thing at the bottom! Thanks so much!!! I feel like a regular Tim the Toolman now…
I always love to watch your vids, always something good, and needed!
Glad to hear it! Thanks for watching, have a wonderful new week!!
Alan wrench followed by tapping on the inside got it going...followed by a long run feeding ice cubes through to get it running smoothly. Thank you!
Glad to hear it worked for you! You're welcome!
Thank you! The allen wrench did it.
Ty soo much. Just put my hex key and it was stuck after releasing with a lever bar and spinning freely turned right back on. You're a life saver. Thank you !!!
Thanks for the tips, this was very helpful and saved me at least $350!!! Keep up the great work!!
Thank you..... Dislodged the spoon that fell in and reset the bottom button. It's working again!! ☺️. So happy I don't have to replace it. Very helpful 👍🏻
You're welcome! Glad to hear that you were able to get it going again!
Hammer-Time! Found you after trying all the usual fixes (#1-4) & then wouldn’t ya know it the hammer did the trick - Thanks so much!!
It was the Allen key for me!!!! You saved me from wasting money on a new unit. Thank you thank you, THANK YOU!!
You're welcome! Glad it worked for you!
Thank you so much! Tapping it was the trick after an hour of fiddling around with it
Thank you so much! A penny was jammed in there 😮. Working now!
Thank you so much for this video I was going to call maintenance to my apartment but I wanted to give it a shot on my own and your method really helped.
Thanks got it working again no need to replace it. Your video was helpful
Very good advice 👍👍
Nice information. Mine worked with the reset button. Thank you for sharing
I use a 11 inch 90 Degree Bent Needle Nose Pliers for this job. You'll be surprised how handy this tool comes into play on the job. The guy is this video has taught me a lot. He should be hired as an Technical Instructor, he's really good at explaining or how he covers all the points of interest for us.
Thank you Bill! I actually have a pair of the pliers you mentioned and they do work great! I figured most people probably don't though so I didn't take mine out.
The Allen wrench method worked for me! Thanks!
Thanks for your help in figuring out the disposal is dead! ❤
Thanks .
Was very helpful.
Only can't bend or sit down.
Will have to see what I can do.
Thanks anyways.
As always,valuable information!.
Thank you! Glad to hear you find it so. Have a wonderful new week good sir!! God bless you and yours!
Thank you so much! I had a plastic stem liquid stopper stuck in blades. So I unplugged it like you said, used the the screwdriver and flashlight to look around. And I had to stick my hand inside to wiggle the plastic from the disposals nasty grip 😅. Thanks again for the awesome tip!😊🎉
Thank you!!! The tapping did the trick for me 😂
This helped me thank you for this!!🙌🏽
Love this video
Wow! First of all, the reset button totally explained why it stopped running all together. Nothing would un jam it, HOWEVER.. hitting it with a mallet totally fixed it! What a bizarre solution, but thank you so much for recommending that as a last resort. 😂
Thank you so much for this informational video. I followed all the steps and stopped at step 4. My garbage is working again.
Thank you so very much! Thanks to you, my 5yr old granddaughter and I just fixed my garbage disposal! Huzzah!
thank you for all the information. I’m trying to see your useful videos in my free time for more knowledge. Greetings to you from Morocco, the first country to recognize America.
I love this! Never too young to teach life skills. Especially to our girls.
OMG ,I am SO GRATEFUL, the hitting it with the hammer fixed it. THANK YOU!!!!!!!!!!!!!
I've always used one of those approximately 18" spring loaded flexible claw like "grabber", I call them, to get the offending item out of a disposal after freeing it up. Worked on one recently that did not have the slot in the bottom to put the key in to spin it. First one I had ever seen that did not have one in around 40 odd years of maintenance work. Fridgidaire, I believe it was. Had to use a pair of long handled channel locks to reach in with one handle and spin the impeller a little at a time. Did that several times before the culprit finally emerged. A soda can pop top tab that was jammed between the impeller and the housing. Almost was ready to give up and tell the homeowner that they needed a new disposal, thinking it was locked up. Only thing I would add to the hammer tapping method is to tap lightly, like you said, and maybe more toward the bottom of the disposal. Point being that I've seen some really old disposals that were all but rusted out inside and maybe more than a light tap with a hammer could possibly send the hammer right thru the outer case. Just a thought. But, if it was locked up that bad anyway, that probably wouldn't matter since it would probably have to end up being replaced. Sorry for being long winded!! LoL. But keep up with the good videos. Have gotten a lot out of them!! Take care.
Thank you for sharing your many years of experience Big D!! Those were a lot of great tips, your input is much appreciated! I am sure this comment will help out quite a few people 👍👍👍
Thank you!
Good vid Jay ... Lot's of good info ... The bus is going left as he's in the right lane ... Aloha ...
Thank you Eddy! And yes! It is indeed going left and that is one of the reasons. Thanks for playing!
Aloha from Hawaii and may you have a blessed new week!
Sometimes garbage disposals freeze up if not used for a long period of time. To prevent this pour some vegetable or olive oil into it and run the disposal every couple of months. This often will also make the unit more quiet as well.
The hammer worked for me. Thank you so much for helping. Saved me some money.
You just saved me some money.. thanks for the video
love all your videos, this one is a year late, but great video as always.
GREAT VIDEO PRESENTATION
#4 thank you!!!! Was really stuck and had to give it some elbow grease to get the free rotation
I had an AC condenser fan that started making all kinds of bearing racket at random times. A quick rap to the side of the unit with my hand would make it quiet ... got me two additional years out of it. When that no longer worked, I replaced it. And your videos made it easy! lol
Bus is headed to the left since it's on the opposite side of the road. We drive in the right lane in the U.S.
Nice to hear that the hitting method has worked for you before! 😄 Getting another 2 years like that is not bad at all.
Yes indeed! The bus is going left! Thank you for playing! (there are another 2 reasons why it's going left by the way 😉 )
The fenders and the front of the bus sticks out further to indicate its headed to the left
Thank you very much it work.
Great tips! Bus is going to the left.
I agree 👍 , if it was in Pakistan to the right , if in Afghanistan , no where , no school bus no schools for girls pass 6th grade and the rulers and also some if not most, need the hammer method and real hard😂
Very good advice! I was able to fix my disposal!😊
Thank you! Glad to hear that!
Amazing!
hahaha. Just gave it a couple of taps and it worked. Thanks!
Thank you so much!!
First time I fixed my self yey!!!
Thank you!! Reset button worked
YOU are AWESOME!!!!!!
You crack me up!!!!
I tried everything and the hammer was what mine needed I guess... I appreciate the advise!
Outstanding
Bus is going to the left as it's in the right hand lane (USA). Good video!
Left is correct! Thank you for stopping by, have a great new week!
My wife's face when I gave it a few whacks with the hammer on the side and top after trying everything else and the disposal starts spinning no problem was priceless... Thanks man!
Haha I love to hear that! Glad you were able to get it going again and were able to impress your wife in the process. 😄 Cheers man!
Thank you ❤thank you I fixed my garbage disposal
Thanks!!! ❤
Thank you.
Oh my. Didn't have an Allen wrench
Before I went to store I tried tapping with hammer. I believe it worked!!!
Allen Wrench never fails.
Awesome video again, Jay 😊
The bus is going forward...
Hahaha I love it! When given the option between A or B, pick C 😄
Thanks for stopping by Mr. Classic, have a fantastic new week!
@@WordofAdviceTV ,
Captain’s Announcement
After a British Airways flight had reached its cruising altitude, the captain announced:
“Ladies and Gentleman, this is your Captain. Welcome to flight 293 non-stop from London Heathrow to Toronto the weather ahead is good, so we should have a smooth uneventful flight. So sit back, relax and… OH, MY GOD!”…………..A scream then silence followed.
Some moments later the captain came back on the intercom, “Ladies and gentlemen, I’m sorry if I scared you, while I was talking to you, a flight attendant accidentally spilled a cup of hot coffee in my lap. You should see the front of my pants!”.
One angry passenger yelled, “Oh for Pete’s sake, you should see the back of mine!!!”
Thank you,,, U saved my day
Thanks for the insight mine is garbage. Have a good day.
No problem and my condolences! May your week only get better from here on out.
I too couldn’t find the gfci outlet that cut power to my garage months after we moved into our house.. I had to email the prior owner to find out it was in a bathroom on the other side of the house. Sheesh. Great video.
😂
Haha oh boy, I'm happy I am not alone and glad to hear you were able to track it down! It's almost like the electrician had a grudge so he left a "present" like that. 😄
YOU ARE AMAZING!!!! I'm in need of my washer to be repaired and kitchen fawcett repairs done. Would you recommend anyone in Vegas???🤔
I run the warm water and pour a few drops of dish soap to get the disposal more clean and less slimy before putting my hand in there
And also leave the water running while using my hand to see what's jamming
That's a good way to do it! I should do that next time too 😅
Wtf, I was about to buy a new one and tried the hammer tapping and it worked.... like, what??
Ps. Thx for the vid, you saved me $