Must watch videos on: How to remove rust from chain: ua-cam.com/video/SRLMWxFeKKg/v-deo.html How to tight/adjust chain slack: ua-cam.com/video/vV8BAKwWDXs/v-deo.html Don't miss the chain guide video: ua-cam.com/video/Uc8qKzecYRA/v-deo.html
Best ever video of chain cleaning & maintenance.....you shown those points which most of the others miss but you did a great job...thank for the video😁
the video is great. but there are two concerns in your video. 1. never clean you chain by putting your engine in running condition. it will lead to fatal accidents. 2. you are spraying the chain lube more than required which results in attracting more dirt.
Hi Prithviraj, Totally agree with your 2 points, I did rectify it in the separate video made for Dominar. I know sometimes I become too generous in showing my love towards bikes & tend to over spray 😁 one good thing about Motul C2 is that it doesn't attracts much dirt/dust as compared to others. Thanks a lot for taking time & puting down these inputs, it will be definitely useful to riders coming to the comment section for additional information 👍
My chain gets tighten at a point...and becomes free when we rotate the wheel. And chain also making cutting noise..! I have lubricated every 500km ,chain slack is also as recommend. Any soultion for the tightness and cutting sound?
Out of total 6M views almost 1M views are from this video 😲, may you become successful. I would want to point something to you, many of other channels are copying your thumbnail pattern so it gets hard to distinguish your videos from others without looking at channel name, (But you quality footage + clean and neat environment where you work as can be seen from images and videos from your Instagram and videos). 🙏🏻 once again thank you for making these videos .
I can see few negative comments in this vlog, it's definitely bcoz of some insane people those who have stomach 🔥 all the time... You just keep moving... Your videos are unique and marvelous...
@@DGCMO it's very dangerous, there have been several accidents because of that. The wheel should be turned manually during maintenance and the engine should always be off.
@@Saxyct yes you are very correct about seven years ago my cousin owned a motorcycle and was cleaning his bike chain while the engine was running obviously to turn the chain and lost his thumb... I understand some people won't believe me but he still has his thumb in a jar with a special liquid to preserve it to this day
Absolutely right +Gaurav Kumar. Actually this one a footage from my original video where I have shown how running chain can be dangerous & how to hold the brush from distance. Really sad to know about your thumb, hope everything is ok now. Thanks for taking time & sharing your experience, I will surely add this in the video description 👍 Ride safe.
Ive also lost about a cm of my left thumb from top. This kind of accident is going quite common with growing use of bikes with uncovered chains. Modern Motorbikes are all coming without chain covers leading to an increase in chain related accidents
Check out your video, it inspired me to clean my front sprocket to try to figure out where all my noise was from. There was layers and layers of caked on wax gunk! Great video! Thanks!
Thanks +alok, so now you know what a slider does 😊 Why do you what to remove the chain guard? Removing the guard will create alot of mess due chain lube spills. Are you planning to upsize the rear tire? Removing the gaurd is easy will cover that in a video 👍
Bro really loved this. Actually I was searching for chain lube to my bike. Luckily I got this video in my UA-cam feed... Got to know how to clean the chain and precautions to be taken. Motul is good in chain lubes... What about 3M chain lube
Bhaiya love your videos and the contents As these chain lube and chain clean are quite expensive for regular use can you say a good, effective and cheap alternative for these products can we use kerosene, petrol or diesel and what can we use for lubing Please reply soon
The additives in diesel destroy some o ring chains. Use pure kerosene only on those. WD 40 is also good. When checking for freeplay check in several spots by rotating the wheel. Set at the tightest place found. Good video.
Thanks a lot +Gouravprakash yadav for the appreciation 😊 I am so glad that you found the videos to be helpful. All the best for your new bike 👍 & Congratulations in advance.
Really awesome Video Bro 👍 being a Apache 200 owner myself, This video made more sense and practical. I too own a vlogging channel, Shall i use your video ?? with your permission ??
Hi +Beast Biker, thanks for the appreciation. Happy to see an Apache 200 owner, loved your channel. You can share the video link but it will be a copyright strike if you copy/download & use the video, it can also cause your channel to get block. Similarly I am not allowed to copy or use your videos against the community guidelines. All the best for the channel will check out from more updates from you. Ride safe.
Good idea Dastan! I will try as getting all the sound will be a difficult affair plus recording the accurate audio will be a task. I hope you understand but I liked your idea 👍
Very informative video and well explained. Thanks bro.. One question can I use motul chain cleaner instead of petrol and then use motul chain lubricant..
Thanks Alexander, Glad to know that you liked it. Have you checked these detailed video on chain maintenance 1. ua-cam.com/video/vV8BAKwWDXs/v-deo.html 2. ua-cam.com/video/Uc8qKzecYRA/v-deo.html 3. ua-cam.com/video/Zfrqgch59M8/v-deo.html 4. ua-cam.com/video/SRLMWxFeKKg/v-deo.html
I've done everything you said to do. And the chain noise is gone. Thank you sir, it saved me from going to the garage and getting ripped off. Now what chain lube do you recommend?
Its a joy to know that the video has helped a rider. I keep on experimenting with different chain lubes like TVS, Wurth, Motul, Waxpol, Rolon, OKS etc all of them work fine till the you are regular with chain maintenance. Some chain lubes like TVS, Rolon etc can be less sticky and spill around but that won't be a big compromise in terms of lubrication.
Hi +Fontenoy58, that's great 😊 glad to know the video was helpful & all the best for the filter cleaning 👍 Do check out other videos on this channel, riders like you might find them interesting. Ride safe.
Helpful! I got my Pulsar 150 serviced recently and I still have the chain noise (clunking) upon hitting bumps etc. The service center say that they have tightented to the max and if the noise persists; chain sprocket kit to be replaced. Is it what they say? Need your view.
Thanks +Monish, Even I thought about showing a worn sprocket. I had one from the karizma but it's all dirty & rusted maybe in some other video or on Instagram, what say?
+Monish M rode the new Duke 390 sometime back & I am love with the console, sadly some riders are facing issue with it but an update on the present batch or improvement in the upcoming batches can surely fix that beauty. Being a small channel never helps in getting review bikes (never got one) but riding friends have always been over enthusiast & they are the reason this channel exists.
The Sportztourer everyone started small.. collecting videos one by one whenever possible and stitching them up into a bigger video with vocals would work..
Thankyou for making this video. This was very helpful and the next time i will keep in mind all the things that you have told. what do you think...? is washing chain at pressure washing with water a good idea???
Hi, Water wash might help in getting away with loose dirt but you will need a solvent based cleaner for the greasy and slug deposits. Thanks a lot for appreciating the video, means a lot to me 😊
Don't show people the simple but deadliest way to clean up chain. Not everyone realises the danger of operating on chain while engine is running in gear. I've had the accident already, although it didn't kill me but took about a cm of my left thumb away. Just spreading awareness. Put a warning on it and re-upload the video
Thanks +Abuturab Bohra, Cleaning & lubrication interval depends on the type of terrain & environment you are riding. For me I lubricate the chain around every 500-600km & cleaning is done around 1500-2000km.
Bro i found your video very helpful... I think chain slider is the reason for metallic noise in my r15 v2...can you please tell me where can i find chain slider
Great channel and high quality content. Buy why do Indian youtubers always use annoying cringey music. Better to have no music. Look at foreign popular youtubers.
Hi Ojan, A lot depends upon the surrounding condition. Cleaning and lubrication is more frequent in the rains. Have made a detailed video on it: ua-cam.com/video/-ntGmU0Q1Lo/v-deo.html P.S: Don't work on a running chain like in that video and be careful with your fingers.
Hi my friend, can you help me?. I have a chain that gets tighter on one side of the rotation and loosen on the other. I do notice that it have a stiff link.. Could that be the reason? Thx Greetings from Chile
Hi, You have probably detected the issue with the stiff link 👍 I would also suggest you to check the sprocket condition where tooth wear can also be a reason behind the issue. It's a joy to read comments from riders across the sea! Happy riding 😊
Well done video. Only thumb down is due to the language, which is only remotely related to English and very difficult to understand for not native speakers.
Must watch videos on:
How to remove rust from chain: ua-cam.com/video/SRLMWxFeKKg/v-deo.html
How to tight/adjust chain slack: ua-cam.com/video/vV8BAKwWDXs/v-deo.html
Don't miss the chain guide video: ua-cam.com/video/Uc8qKzecYRA/v-deo.html
Sir one more thing we should also clean the chain rubber guard
Very helpful and satisfying video, now I just need to buy a bike!
🤣🤣😂😂
Me too
Better just buy a chain😂😂
😁
U can do the same in cycle also
Best ever video of chain cleaning & maintenance.....you shown those points which most of the others miss but you did a great job...thank for the video😁
Thanks a lot +Veerendra Sahu for the appreciation.
'Best video ever' tag made me really happy 😊😊
the video is great. but there are two concerns in your video.
1. never clean you chain by putting your engine in running condition.
it will lead to fatal accidents.
2. you are spraying the chain lube more than required which results in attracting more dirt.
Hi Prithviraj,
Totally agree with your 2 points,
I did rectify it in the separate video made for Dominar. I know sometimes I become too generous in showing my love towards bikes & tend to over spray 😁 one good thing about Motul C2 is that it doesn't attracts much dirt/dust as compared to others.
Thanks a lot for taking time & puting down these inputs, it will be definitely useful to riders coming to the comment section for additional information 👍
My chain gets tighten at a point...and becomes free when we rotate the wheel. And chain also making cutting noise..! I have lubricated every 500km ,chain slack is also as recommend.
Any soultion for the tightness and cutting sound?
@@ravikiran3314 replace chain sprocket
@@ravindrashahapurkar6956 why?
Prithviraj M N great
Out of total 6M views almost 1M views are from this video 😲, may you become successful.
I would want to point something to you, many of other channels are copying your thumbnail pattern so it gets hard to distinguish your videos from others without looking at channel name, (But you quality footage + clean and neat environment where you work as can be seen from images and videos from your Instagram and videos).
🙏🏻 once again thank you for making these videos .
I can see few negative comments in this vlog, it's definitely bcoz of some insane people those who have stomach 🔥 all the time... You just keep moving... Your videos are unique and marvelous...
DON'T HAVE YOU BIKE RUNNING WHEN CLEANING OR DOING ANY MAINTENANCE ON YOUR BIKE PLEASE DON'T.
Why?
@@DGCMO it's very dangerous, there have been several accidents because of that. The wheel should be turned manually during maintenance and the engine should always be off.
@@Saxyct 💯👍thanks bro.
Yeah, it's too dangerous. I tried once haha, shock of my life
@@Saxyct yes you are very correct about seven years ago my cousin owned a motorcycle and was cleaning his bike chain while the engine was running obviously to turn the chain and lost his thumb... I understand some people won't believe me but he still has his thumb in a jar with a special liquid to preserve it to this day
I do same thing with diesel sprayed on chain and sprokets and after 30 min washes with karcher pressure washer (washing with water @120 bar pressure )
thnx a lot .today i have cleaned it after 3 years n there was much mudd(durt) stuck around 250grams.😅.now my bike run without noise 😍
250 grams!! Oh my.. you must be enjoying the motorcycle now!
It's a joy to know that the video has served it's purpose 😊
Thanks u helped with lot of issues I ws facing with pulsar bike chain
Thanks +AskThe Tech for the appreciation & I glad that the video was helpful to you, mission accomplished 👍
Ride safe.
After this video I am waiting
For Sunday. ...
Love from Pakistan. ....
Thanku for giving me heart
Well explained...
Very informative
Specially front sprocket cleaning
+Majju Moto Mods by Aayush majumdar
Thanks a lot, glad that you found it informative 👍
Never ever tried cleaning chain with started bike......i had loose my thumb so move chain mannualy
Absolutely right +Gaurav Kumar. Actually this one a footage from my original video where I have shown how running chain can be dangerous & how to hold the brush from distance.
Really sad to know about your thumb, hope everything is ok now.
Thanks for taking time & sharing your experience, I will surely add this in the video description 👍
Ride safe.
Ive also lost about a cm of my left thumb from top. This kind of accident is going quite common with growing use of bikes with uncovered chains.
Modern Motorbikes are all coming without chain covers leading to an increase in chain related accidents
My thumb also
+1. I almost lost my finger. I lost around 3-5 mm of my thumb.
The Sportztourer says he lost his thumb and you put thumbs up emoji 😂😂
बोहोत अच्छी जानकारी दी आपने धन्यवाद ऐसे ही और अच्छे वीडियो बनाते रहीए
Check out your video, it inspired me to clean my front sprocket to try to figure out where all my noise was from. There was layers and layers of caked on wax gunk! Great video! Thanks!
Missed out to suggest which chain cleaner to be used.. pls put a light on that part.. rest of evryting ws very much informative..thanks..
Thanks +aswin ts, here is the detailed video: ua-cam.com/video/-ntGmU0Q1Lo/v-deo.html
Nice information... i think bajaj bikes gives more chain problems
Abhi B pulsar
Very much helpful...& very well explained with minute details..
Thanks a lot +Sion Rajendra Silal for the appreciation 😊
Do check out other videos on the this channel you might find them interesting.
Ride safe.
Now I have completed my graduation in chain lubrication 😂😂😂😉.quiet helpful
Ha ha ha.. its a joy to know that you liked the video and found it helpful 😊
Really helpful video bro👍
I've always wondered what that rubber part did😂
Also can you show how to remove the chain guard+suspension guard out??
Thanks +alok, so now you know what a slider does 😊
Why do you what to remove the chain guard? Removing the guard will create alot of mess due chain lube spills.
Are you planning to upsize the rear tire? Removing the gaurd is easy will cover that in a video 👍
Looking forward for the video. And no i Just wanted to know, not upsizing the tire. Feels like lot of dirt is stuck under there
Bro really loved this. Actually I was searching for chain lube to my bike. Luckily I got this video in my UA-cam feed... Got to know how to clean the chain and precautions to be taken. Motul is good in chain lubes... What about 3M chain lube
I am seeing this after seeing your recent videos, You have come a long way in dubbing quality. Very good keep it up
Thanks a lot.
The quest for excellence is never ending 😊
Nice way of talking, slow background music and so much informative. subscribed your channel.
Bhaiya love your videos and the contents
As these chain lube and chain clean are quite expensive for regular use can you say a good, effective and cheap alternative for these products can we use kerosene, petrol or diesel and what can we use for lubing
Please reply soon
The additives in diesel destroy some o ring chains. Use pure kerosene only on those. WD 40 is also good. When checking for freeplay check in several spots by rotating the wheel. Set at the tightest place found. Good video.
Bro please make a video on bajaj dtsi engine oil drain intervel of 10000 kms
I liked ur videos as i am planning to buy a 200 cc motorcycle so these videos helps a lot to know hows about the Bikes.
Thanks a lot +Gouravprakash yadav for the appreciation 😊 I am so glad that you found the videos to be helpful.
All the best for your new bike 👍 & Congratulations in advance.
Your videos quality are awesome now and it's amazing that now you describe with your voice. Thank you awesome.
Thanks +Praful Meena for that awesome appreciation 👌
Really happy that you loved the voice over ☺
Really awesome Video Bro 👍 being a Apache 200 owner myself, This video made more sense and practical. I too own a vlogging channel, Shall i use your video ?? with your permission ??
Hi +Beast Biker, thanks for the appreciation. Happy to see an Apache 200 owner, loved your channel.
You can share the video link but it will be a copyright strike if you copy/download & use the video, it can also cause your channel to get block. Similarly I am not allowed to copy or use your videos against the community guidelines.
All the best for the channel will check out from more updates from you.
Ride safe.
I like your videos Bro dey r really useful 👍
Thanks alot +Abhisekh Nanda for the appreciation. It means a lot & motivates a lot more to create such content.
Ride safe.
I have learned something thank you for sharing this with us.
Can you upload videos on different sound created by chain and what does it mean
Good idea Dastan!
I will try as getting all the sound will be a difficult affair plus recording the accurate audio will be a task. I hope you understand but I liked your idea 👍
i think above idea is more important
Dude you videos and explanation are crystal clear. 👍
Thanks a lot Ajay for valuing the videos! I am glad that you liked them 😊
Very informative video and well explained. Thanks bro.. One question can I use motul chain cleaner instead of petrol and then use motul chain lubricant..
Nicely explained
Today I'm gonnna clean my 220f😍
Hi +iam uday,
All the best 👍 be careful with your fingers.
Straight to it. Nice. Thanks for the vid.
Thanks Alexander, Glad to know that you liked it.
Have you checked these detailed video on chain maintenance
1. ua-cam.com/video/vV8BAKwWDXs/v-deo.html
2. ua-cam.com/video/Uc8qKzecYRA/v-deo.html
3. ua-cam.com/video/Zfrqgch59M8/v-deo.html
4. ua-cam.com/video/SRLMWxFeKKg/v-deo.html
Very simple and clear instructions. A good and knowledgeable video.
Thanks! Glad to know that you liked it 😊
Great work as always 😍 thoroughly covered all the important points 👌👌👍👍
I've done everything you said to do. And the chain noise is gone. Thank you sir, it saved me from going to the garage and getting ripped off.
Now what chain lube do you recommend?
BTW you have also earned my respect and I am subscribing to your channel.
Its a joy to know that the video has helped a rider.
I keep on experimenting with different chain lubes like TVS, Wurth, Motul, Waxpol, Rolon, OKS etc all of them work fine till the you are regular with chain maintenance. Some chain lubes like TVS, Rolon etc can be less sticky and spill around but that won't be a big compromise in terms of lubrication.
Very useful....your voice like rohit sharma
wonderful video...i was just looking for this...now i can do it myself at home..in free time...thankss
Hi +Fontenoy58, that's great 😊 glad to know the video was helpful & all the best for the filter cleaning 👍
Do check out other videos on this channel, riders like you might find them interesting.
Ride safe.
Thanks for providing genuine information..👍👍🏼
very helpful. thank you. from sri lanka.
Helpful! I got my Pulsar 150 serviced recently and I still have the chain noise (clunking) upon hitting bumps etc. The service center say that they have tightented to the max and if the noise persists; chain sprocket kit to be replaced. Is it what they say? Need your view.
very nice explanation sir
Can you make a video on spark plugs,their variants & cost effective yet efficient one....
yes this video is useful to know about the causes 👍.. it would be nice if you can show a worn out chain sprocket just for reference..
Thanks +Monish, Even I thought about showing a worn sprocket. I had one from the karizma but it's all dirty & rusted maybe in some other video or on Instagram, what say?
The Sportztourer sure 👍 how about a comparison of the digital consoles and their features in different bikes..
+Monish M rode the new Duke 390 sometime back & I am love with the console, sadly some riders are facing issue with it but an update on the present batch or improvement in the upcoming batches can surely fix that beauty.
Being a small channel never helps in getting review bikes (never got one) but riding friends have always been over enthusiast & they are the reason this channel exists.
The Sportztourer everyone started small.. collecting videos one by one whenever possible and stitching them up into a bigger video with vocals would work..
Right +Monish M, never expected this kind of motivation & support from riders like you, Thanks!
Thankyou for making this video. This was very helpful and the next time i will keep in mind all the things that you have told. what do you think...? is washing chain at pressure washing with water a good idea???
Hi,
Water wash might help in getting away with loose dirt but you will need a solvent based cleaner for the greasy and slug deposits.
Thanks a lot for appreciating the video, means a lot to me 😊
@@thesportztourer thankyou for replying....i usually did the cleaning with diesel , and later washed it with water....thanks for telling
Well crafted for a common man
🔥
Wow brother, another great video about maintaining the drive train... Keep going...
Thanks a lot for appreciating the videos! Glad to know that you liked it so much 😊
@@thesportztourer 👍👍👍
Great i always have this problem. Great job you are the best
Good information sound problem irritation thanks bro👍👍👍👍👍👍❤❤❤❤❤
Best video till date
Definitely, it was a useful video. Thanks buddy 👍
Really nice video bro it's useful for bike beginners n bike lovers 👍👍👍 keep it up
Thank alot +Karthick, glad that you found it useful. More such content coming soon ☺
Superb video, is this same type of sprocket cleaning applicable on Avenger 150 street. I now think i hear chain slap noise from my ride.
Yes Amit, you can clean the front sprockets on the Avenger 150 👍
Thanks for appreciating the video 😊
Very usefull brother...thankyou from within❤
Sayeed pasha😉
Don't show people the simple but deadliest way to clean up chain.
Not everyone realises the danger of operating on chain while engine is running in gear.
I've had the accident already, although it didn't kill me but took about a cm of my left thumb away.
Just spreading awareness.
Put a warning on it and re-upload the video
Yes a lot of people have been injured this way . A big warning can atleast prevent this situation in the future for our friends . ride safe :)
This is usefully video for me thanks sir but which oil is best please tell me
Hi,
Which motorcycle?
Good explaination on chain sound reasons ...keep it up bro
Great work bro, great process to clean our chain 😃
Thanks Ahxan for calling it great 😊
It was really useful video.
Also, can you suggest in how much time or Km interval chain should be checked for cleaning and lubrication ?
Thanks.
Thanks +Abuturab Bohra,
Cleaning & lubrication interval depends on the type of terrain & environment you are riding. For me I lubricate the chain around every 500-600km & cleaning is done around 1500-2000km.
Good video but you should remove chains and clean it safely.
Love ur video's bro 🇧🇩
Bro i found your video very helpful... I think chain slider is the reason for metallic noise in my r15 v2...can you please tell me where can i find chain slider
Hi Adnan,
You can get the slider from authorized service. Thanks a lot for appreciating the video 😊
Great channel and high quality content. Buy why do Indian youtubers always use annoying cringey music. Better to have no music. Look at foreign popular youtubers.
Well done buddy. Very informative and helpful towards correcting mistakes...thank you.. And I must subscribe for more topic in future.
Thanks a lot Subhajit for valuing the content.
Subscription is always a big motivation to make more such video 😊
Hey bro how often do you maintain your chain
Like clean and lube
Adjust the slack
Hi Ojan,
A lot depends upon the surrounding condition. Cleaning and lubrication is more frequent in the rains. Have made a detailed video on it: ua-cam.com/video/-ntGmU0Q1Lo/v-deo.html
P.S: Don't work on a running chain like in that video and be careful with your fingers.
Helps a lot, thank you brother !!
I am fan of ur video the explained about the chain
Thank you sooo much +Sai Kiran for this amazing comment 👍 glad that you liked it 😊
Very informative and content full video, keep it up bro
Thanks a lot +Bhanu Pratap Yaduvanshi, that was really motivating 😊
Ride safe.
Epic explanation !
Do more videos
Thanks +Javid Mohamed 😊
Yes, more videos are on the way. Till then you can enjoy rest of the videos.
Ride safe.
God bless u !!
Thanks a lot +Larsen William, let the blessings spread all over. Every time I am on road I pray for safer roads & riders.
Kindly please upload apache rtr 160 tips and tricks and im waiting for it 😊😊
You would have mention about chain lock also as it is also the main reason that most of the people and even some mechanic don't know
Very helpful video... Keep it up..
Thanks a lot +A. J. 😊
Thanks bro, very useful information.
Excellent video
Hi my friend, can you help me?. I have a chain that gets tighter on one side of the rotation and loosen on the other.
I do notice that it have a stiff link.. Could that be the reason?
Thx Greetings from Chile
Hi,
You have probably detected the issue with the stiff link 👍 I would also suggest you to check the sprocket condition where tooth wear can also be a reason behind the issue.
It's a joy to read comments from riders across the sea! Happy riding 😊
Good video ..
Clean and best ever info 🔥❤️
Really a kind of helping video.....!!
Hi Purab, I am really happy to know that you found it helpful 👍
It was helpful 5 point u said that's the case in my bike
Good video with explanation...
Very useful information thank you
Thanks a lot +Srinivas V for the appreciation 😊
Informative and helpful 👍
Thanks, glad to know that you found it helpful 😊
You make such nice videos dada 😍😍😍
I am glad +MotoTune TM you liked it 😊
Great video buddy👍
Thanks +pavan 'S for the appreciation 😊
Perfect 👌 as always
Excellent bro
Thanks a lot +saivivek kurugodu for the appreciation 😊
saivivek kurugodu thanks
More details about how to keep the RTR 200 BS3 healthy?
Well done video. Only thumb down is due to the language, which is only remotely related to English and very difficult to understand for not native speakers.
Thanks dude for this useful information
Most welcome 😊
best video i ever see ☺😙 tnx
It realy help me.
Thanks for this video.
I am glad that it helped you Pankaj 😊
Hi ,
Could you please help me in understanding whether the chain condition is ok or not.
Really helpful information 👍👍👍👍
Thanks +peeyush vashist, glad that you found it helpful 😊
Diesel will damage the O-rings. I tried with diesel and the orings came off during summer highway ride. Use WD40 or Chain Clean or Kerosene.
Diesel is recommended in many user manuals, so it's completely safe. Petrol is not safe, wd can be used but it's good for a rusty chain.
very good & informative video, thanks for the information.
I am glad you liked and found it informative 😊
Thanks a lot. 🔥 Was helpful.