Gotta admit I went from GM to ford to Ram and now looking back at these 2022s in a RCSB Silverado ... they did make em so much user friendly compared to others ... Ty for sharing
2021 Silverado Custom ------ Great video, direct and to the point. I went with the suggested LASFIT for both high/low beam, reverse, plate, and front turn signal (this was by far the simplest install). Installed about a month ago. The lights are significantly brighter than the factory halogens. I did not make any aim adjustments after the install. I have only been bright light flashed when it is raining so I am going to follow the aim adjustment guidance by LASFIT so I can avoid blinding oncoming traffic.
Thanks for the video boss, just watched it on Sunday and got all the pieces that you put in the description off of Amazon for faster shipping. Just installed everything this morning and it’s looking real badass at night. Thanks for the suggestion!
Driver's side is tricky if you got big forearms and its hard to get them in straight as well, I am wondering if the washer fluid tank can be dropped easily for folks with large arms? 2021 Custom Trailboss
I saw someone on here comment that, that's what they did to make it easier. They had to move the wheel liner (plastic piece inside the vender) to get access to move the fluid tank out of the way.
Got the lights installed thanks for video, question the old halogen bulbs turned to lock into place these H11 dont seem to slide and lock in they just sit in place. Is this accurate?
the led bulbs have 2 pieces (the locking part ur talking about and the led itself) instead of 1 like the oem ones. The first piece is what locks into the headlight and the led just sits in it snug (you would still be able to turn the led bulb by hand which I'm sure is what ur asking about)
@@sirlo3149 well I ordered sealight lights and yea they fit, took me about an hour ish to do all of em, however with the set I bought, when the auto stop and start engages the lights will flicker.... the hi beams are a pain because of lack of room for ya hand, for the highs go thru the wheel well and make sure to have plenty of light and patience
Great video man short and to the point. I have a 2023 custom and just changed all mine out. Shame they can’t come that way. I also changed my turn signals up front to LED
I can't freaking believe how easy it is to do compared to my 2008 Silverado! You got to take off damn near the whole front end just to replace a bulb!!! The 2002 were really easy. You simply twist and pull a small bar shaft and the headlight assembly would slide out.
I had a lot of trouble getting mine into the front housing and turning them to lock. I had better luck removing the ring and the gasket from the LED, and pushing them in. I took the factor light, pushed it into the hole, and was able to easily turn and lock the ring. after that, i pushed the led into the hole, and the install was finished.
Hey. I know this video is 3 years old. But the links in the description takes me to lights that doesn’t fit the 2020 custom. Are there any other ones that you know of that will fit for sure ? Combo pack
They will fit the custom brother But here is the combo pack for the rear www.lasfit.com/products/2021-chevrolet-silverado-1500-led-bulbs?rq=mk_chevrolet~md_silverado-1500~yr_2020~na_led-bulbs~zq_custom~dz_1-combo-package
You just got to be patient with it. If yours has the plastic piece that is removable (the piece that actually sits in the head light) then u can put that first and then insert the led brother
21 Silverado Custom ---- Ha, yes the passenger high beam took me twice as long to get seated and installed properly as well. I ended up installing the factory bulb back in, and then removing it again so I could pay closer attention to the orientation. Finally got it in an seated correctly.
The owners manual says to not install LED lights in the 2020 custom to replace factory incandescent bulbs. It sites potential damage to the electrical system. Stock headlight bulbs can't be incandescent........right???
I just bought a 2021 custom and just ordered all these lights. thanks for the video. Also, I am having the hardest time finding a front tag bracket for my 2021. Did yours come stock?
@@hawatmehtechtips2624 you can use supsdiy10 to save you 10% percent if you like and I made another video on my channel about some high end ones they sale if you interested in those as well 😁👍
Awesome video man, had a hard time putting the reverse lights but finally got them on. Did you also install led turn signals? And what resistor did you use? I installed mine but they only turn on with the turn signal.
Thanks bro! And no I have put turn signals on my 2020 but I did on my 95 OBS and I did have to install resistors, I imagine you need to do the same on the 2020 unless you buy the bulbs from LasFit that are already built in the bulb.
I just installed the LASFIT CANBUS Ready 7443 7444 T20 LED Turn Signal Light Took about 60 seconds to install, no resistor needed. Just plug in and go. www.amazon.com/dp/B07KXSTLQQ?psc=1&ref=ppx_yo2_dt_b_product_details
Hey man, just got my 2020 Silverado 1500 Custom. I was looking on Amazon for these bulbs and found them, however it is telling me they wont fit my truck. Any suggestions? Also, great video brother!
Here you go brother - License Plate was Lasfit T10 Led 6k - Reverse Lights was Lasfit 921 6k And for the low beam I would also use Lasfit 9005 6k (High Beam) and H11 6k (High Beam). In this video I used an off brand (Still great but rather you get the good stuff 😁)
Esteban Martinez One last question......were you able to correct the problem?? Is it worth changing them out perhaps with something different?? I've only had my Chevrolet Custom about a month now. Thanks again.
Gotta admit I went from GM to ford to Ram and now looking back at these 2022s in a RCSB Silverado ... they did make em so much user friendly compared to others ... Ty for sharing
2021 Silverado Custom ------ Great video, direct and to the point. I went with the suggested LASFIT for both high/low beam, reverse, plate, and front turn signal (this was by far the simplest install). Installed about a month ago. The lights are significantly brighter than the factory halogens. I did not make any aim adjustments after the install. I have only been bright light flashed when it is raining so I am going to follow the aim adjustment guidance by LASFIT so I can avoid blinding oncoming traffic.
Glad the video helped you brother!
I only did my headlights. Someday maybe all the lights will be leds including the interior lights. Nice work. Nice video.
Thanks for the video boss, just watched it on Sunday and got all the pieces that you put in the description off of Amazon for faster shipping. Just installed everything this morning and it’s looking real badass at night. Thanks for the suggestion!
Glad it helped you brother!
ordered and actually installing today. I appreciate it big time man! Can’t wait to see it
Driver's side is tricky if you got big forearms and its hard to get them in straight as well, I am wondering if the washer fluid tank can be dropped easily for folks with large arms? 2021 Custom Trailboss
I saw someone on here comment that, that's what they did to make it easier. They had to move the wheel liner (plastic piece inside the vender) to get access to move the fluid tank out of the way.
Hey man, great camera work! A lot of other videos didnt show down inside the backside of the light housing. Thanks man!
Thanks brother, I try to get as detail as I can for yall 😁
Thanks dude great video gotta change mine now my driver headlight went out today
@spartachris3516 Glad it helps you brother 😁👍!
This was a GREAT video thanks so much. I ordered all the lights you recommended and put the low/hi beams in and worked like a charm.
Glad it helped! 😊👍
Bought these exact lights for the same truck. Turned out great thanks to your video. Great job.
Glad it helped! 😊👍
Just wanted to say that I used your link to the headlights to purchase a set of my own. Thank you!!
Glad it helped you brother and thanks for the support!
Got the lights installed thanks for video, question the old halogen bulbs turned to lock into place these H11 dont seem to slide and lock in they just sit in place. Is this accurate?
the led bulbs have 2 pieces (the locking part ur talking about and the led itself) instead of 1 like the oem ones. The first piece is what locks into the headlight and the led just sits in it snug (you would still be able to turn the led bulb by hand which I'm sure is what ur asking about)
@@SUPSGARAGE ty
Thanks bro doing my 22 custom so just needed to see what I was in for... great vid and explanations, stay blessed happy new year
Thank you and glad it helped you!
these worked with your 22 model?
@@sirlo3149 what do you mean
@@Mike-re7sq like did they fit and did you get any error codes?
@@sirlo3149 well I ordered sealight lights and yea they fit, took me about an hour ish to do all of em, however with the set I bought, when the auto stop and start engages the lights will flicker.... the hi beams are a pain because of lack of room for ya hand, for the highs go thru the wheel well and make sure to have plenty of light and patience
Great video man short and to the point. I have a 2023 custom and just changed all mine out. Shame they can’t come that way. I also changed my turn signals up front to LED
Thanks brother! and I agree with u they should have came with better lighting lol
I can't freaking believe how easy it is to do compared to my 2008 Silverado! You got to take off damn near the whole front end just to replace a bulb!!! The 2002 were really easy. You simply twist and pull a small bar shaft and the headlight assembly would slide out.
I had a lot of trouble getting mine into the front housing and turning them to lock. I had better luck removing the ring and the gasket from the LED, and pushing them in. I took the factor light, pushed it into the hole, and was able to easily turn and lock the ring. after that, i pushed the led into the hole, and the install was finished.
Thanks for the video, I just brought home a 2020 hd custom. Do you know if the 6k bulb color match the Factory led cargo lights pretty well?
Thanks bro! If ur trying to match the cargo lighting ur better off getting 5k. Its more white then it is blue.
Hey. I know this video is 3 years old. But the links in the description takes me to lights that doesn’t fit the 2020 custom. Are there any other ones that you know of that will fit for sure ? Combo pack
They will fit the custom brother
But here is the combo pack for the rear
www.lasfit.com/products/2021-chevrolet-silverado-1500-led-bulbs?rq=mk_chevrolet~md_silverado-1500~yr_2020~na_led-bulbs~zq_custom~dz_1-combo-package
@@SUPSGARAGE ok. Thank you
Good video, very informative and straight to the point. Thank you
Is the high beam and low beam the same bulb
No brother high beams are 9005 and the low beams are H11 hope this helps you!
I had a hell of a time getting the drivers side high beam to turn into place
I have the 2021 Silverado custom what is the part number the lights
I got all the info in the description brother and the links as well to make easier for yall 😁👍
Well done video. Simple and straightforward.
How did you get the passenger side hi beam in? I can get it twist in like the driver side hi beam did.
You just got to be patient with it. If yours has the plastic piece that is removable (the piece that actually sits in the head light) then u can put that first and then insert the led brother
Did you end up getting it? I also have a 21 and I can’t get em to turn lol. I noticed they have a blue piece on em that the lows don’t.
21 Silverado Custom ---- Ha, yes the passenger high beam took me twice as long to get seated and installed properly as well. I ended up installing the factory bulb back in, and then removing it again so I could pay closer attention to the orientation. Finally got it in an seated correctly.
@@kirkmoon8531 Yeah I ended up taking the whole headlight out and putting it in after trying without removing it for 3 days. 😂
What about Turn Signals and the stop lights? The new Custom doesn't have anything LED
Look at my videos brother, I have one about the turn signals.
Whats up, just curious what brand headlights did you chose and so they come with the wiring too or just the bulbs. Thank you.
Best to go with LASFIT brother and the wiring is all ready connected to the bulbs.
@@SUPSGARAGE ok cool. Much appreciated.
Did ou need a conversion kit for the led headlights? Did you get any error messages?
No conversion needed for these and it never showed error codes
Complete came out damn good thank you!! Perfect recommendation for lights
Glad the video helped you! 😁👍
So the top light is the low beam and the bottom is the highbeam?
Thats correct brother
Is this the same for a 2022?
Would this work for a 2022 custom trail boss?
I do not believe so
The owners manual says to not install LED lights in the 2020 custom to replace factory incandescent bulbs. It sites potential damage to the electrical system. Stock headlight bulbs can't be incandescent........right???
For the front driver side, I opened up the wheel liner and dropped the window wiper reservoir. Easy access afterwards.
Does this work for a 2022 custom trail boss ? Just got mine and kinda disappointed at the yellowish color of my lights?
I don't believe so. Doesn't that model come with leds Integrated in the head light?
I just bought a 2021 custom and just ordered all these lights. thanks for the video. Also, I am having the hardest time finding a front tag bracket for my 2021. Did yours come stock?
Glad the video helped brother! And mine came stock. Yours didn't come with anything?
About to do mine over the weekend, what are you talking about about front tag bracket?
@@jeffreyjuneau1959 I think he meant the license plate bracket brother.
Is this the same way from a 2022 trail boss
I do not believe so brother
I sure hope so.. I just got my truck and has the holgen bulbs and man big big difference
@@DanielLopez-ht4ov yea there is a hug difference
I just got some as well 9005 an 9006 but the 9006 is not working on the low beam
What’s both the numbers for low an high beam
Here you go brother 9005 (High Beam) and H11 (Low Beam)
Thank you sir I just re ordered some
@@russellwilliams2307 Glad I could help brother 😁👍
What are the bulb numbers for the reverse lights and license plate bulbs? Thanks
Here you go brother
- License Plate was Lasfit T10 Led 6k
- Reverse Lights was Lasfit 921 6k
This video is more helpful the lasfit video great tips. Thanks
I wanted to do that for my 2021 Silverado, but wouldn't replacing regular bulbs with aftermarket LED damage the electrical systems in the truck?
it won't mess anything up brother but don't go cheap either. LASFIT makes great and very bright leds for these trucks!
@@SUPSGARAGE Gotcha, thanks bud!!
@@hawatmehtechtips2624 you can use supsdiy10 to save you 10% percent if you like and I made another video on my channel about some high end ones they sale if you interested in those as well 😁👍
@@SUPSGARAGE will do thanks!
Great Video thanks Pal!
Thank you, glad it helped!
Very well done!
Awesome video man, had a hard time putting the reverse lights but finally got them on. Did you also install led turn signals? And what resistor did you use? I installed mine but they only turn on with the turn signal.
Thanks bro! And no I have put turn signals on my 2020 but I did on my 95 OBS and I did have to install resistors, I imagine you need to do the same on the 2020 unless you buy the bulbs from LasFit that are already built in the bulb.
I just installed the LASFIT CANBUS Ready 7443 7444 T20 LED Turn Signal Light
Took about 60 seconds to install, no resistor needed. Just plug in and go.
www.amazon.com/dp/B07KXSTLQQ?psc=1&ref=ppx_yo2_dt_b_product_details
Hey man, just got my 2020 Silverado 1500 Custom. I was looking on Amazon for these bulbs and found them, however it is telling me they wont fit my truck. Any suggestions? Also, great video brother!
Which bulbs are you asking about brother? The headlight bulbs, license plate bulbs or the reverse light bulbs?
DIY heaheadlights
As long as you get 9005 (High Beam), H11(Low Beam) LED bulbs it should fit bro.
@@SUPSGARAGE thanks man!
@@SUPSGARAGE That's the same problem I ran across from Amazon. Did the new numbers 9005 and H11 matchup with your 2020?
Thanks bro , Im going to change mines now lol
Glad to help brother!
Can I get a link for the high beams on amazon I have a 2020 custom TIA
Whats a TIA bro?
Thanks in advance lol
@@franciscocazares3845 oh lol. This should work bro
www.amazon.com/dp/B07FQNC285/ref=cm_sw_r_cp_apa_i_mZyxFbWKTNTA0
The lights are different on the RST and LT models.
that is correct, this video is only for the custom model.
What brand of LED's did you use and what's the part number?
Here you go brother
- License Plate was Lasfit T10 Led 6k
- Reverse Lights was Lasfit 921 6k
And for the low beam I would also use Lasfit 9005 6k (High Beam) and H11 6k (High Beam). In this video I used an off brand (Still great but rather you get the good stuff 😁)
@@SUPSGARAGE did you have any error codes or hyperflash
No I didn't brother, maybe if i did the turn signals I would but everything I've done on this video will not give you any kind of error codes
Did you have any trouble with putting the reverse bulbs in. I purchased the 921 and for some reason they will not fit the plug
Use a flat head screw driver to bend open the metal tabs that hold the led just a bit and it will fit brother.
What’s the bulb size for 2020 Silverado 1500
9005 for the high beam and H11 for the low beam brother
SUP'S! DIY thanks men 👍
Why do manufactures still put regular bulbs? Are they really trying to save money?
I'm sure they still do there best to save on there end lol
Great thank you
Has anyone had a bad experience with changing the halogen to LED?? I was told it would void my GM Warranty if they messed up my electrical system.
I installed some LEDS on my headlights and my check engine came on it's a 2020 silverado 1500. Any help with this?
Esteban Martinez What brand of LED lights were they?? Did you do headlights (high/low beams??) turn signals?? Reverse lights??
Just headlights their scoparc led lighting from Amazon
Esteban Martinez One last question......were you able to correct the problem?? Is it worth changing them out perhaps with something different?? I've only had my Chevrolet Custom about a month now. Thanks again.
Awesome video.
Links?
There in the description 😊👍
Great video
Thanks for the video bro and links big help!!
Thats what these videos are for, glad it helped bro!