Thanks - excellent video. I especially like the fact that there is no commentary but it is very clear. The fence that I bought with my saw was useless and broke very quickly. It is on my "to do" list to make one of these.
Thank you very much for your comment 👍. I have already made 4 different fence saw tables and this one is the most convenient and reliable. The only thing I would like to change is the handle to an eccentric. I think it will be even more convenient.
Your video reminded me of a famous quote: "Boards don't hit back." Boards do hit back when finger pushing them into the blade. Also, working on a table saw with a long sleeve shirt can pull your whole arm into the blade faster than Bruce Lee. You do great work! Stay safe.
Great fence build...! I just messed up my fence and was dreading trying to find another one for my old table saw. But now I'm going to try and build this one. Thanks you so much for sharing your idea and time. New subscriber and follower now!
Nice job! Why do you need to make a pull from the threaded stud to the other side of the stop? Why can't you make a clamp in the same place where the handle is?
Thanks for the comment. I did it that way, but when I started sawing, the back of the fence was leaning to the side. That's why I made a pin across the entire fence so that the clamp would be on both sides.
Thanks for the comment. The saw is screwed to the bottom of the table. I have a video on my channel where I make a table saw. It's called how to make a table saw and a table saw fence.
Hello again sensei. Tomorrow my tools finally gonna arrive. I am going to build these. Thickness of off wood used is ply wood 10mm? Also width of your table saw is 800mm so if mine is 600mm I have to shorten the 865 to 665 and 950 to 750 the rest is exact same am I right?
Супер! Может быть многовато винтов...Автору респект!!! НО... Попробовал повторить... Размеры указанные автором НЕ КОРРЕКТНЫ. При наличие люфта, а ЛЮФТ ЕСТЬ ВСЕГДА, параллельность НЕ ФУНКЦИОНИРУЕТ. Разочарован...
@@mr.IQhomemadeDIY Уважаемый автор, у Вас не все размеры корректны...чтобы были бортики сверху, высота левой и правой стенки должна быть более 700 мм, кроме этого есть ещё ошибки ...
I showed the entire assembly process in great detail. And I think everyone who has a circular saw knows how to use a fence saw table. Thanks for the comment 👍
Part dimensions
865*70-1
950*70-3
70*40-5
60*90-2
100*90-1
100*250-2
60*70-3
Thank you for the dimensions 👍
Nice job work good
Could you please post cut list in inches to would be awesome i am trying to make it is not as good as yours?
Hi very smart, what is the dimensions of your saw table ?
Complimenti, semplice e funzionale. Grazie per l'idea brillante e per averla condivisa.
I seriously just bought the threaded rod, nuts and washers yesterday to make that fence lol its a simple yet super strong design 💪
Now you have instructions for assembling a saw fence 😀
what size thread should I use
Thanks - excellent video. I especially like the fact that there is no commentary but it is very clear. The fence that I bought with my saw was useless and broke very quickly. It is on my "to do" list to make one of these.
Thanks for the comment. I'm glad my video is useful. If you have any questions about the table saw fence, I will be happy to help.
No commentary, you are so right.
I just bought an old craftsman 113 and I've watched 100 fence videos and this is the one that I'm building. Great video. Thank you so much.
Thank you very much for your comment 👍. I have already made 4 different fence saw tables and this one is the most convenient and reliable. The only thing I would like to change is the handle to an eccentric. I think it will be even more convenient.
man this is the best build i've ever seen i got a saw broken fence and can't buy one for it you just helped me repair my saw THANK you so much
I'm glad I could help. Thanks for the comment.👍
I have just rebuilt my table saw and was looking for a simple effective Fence and now I shall be building this during the week thank you for sharing
I'm glad I could help you. Thanks for the comment 👍
Best fence I have seen on youtube. going to try this. thanks so much for sharing your idea and time
I'm glad you liked my idea. Thanks for your comment 👍
I think you should brand that fence a sawstop beautiful work there mate and thanks for the
Dimensions
Thank you very much. it's great when your work is useful 👍👍👍
Your video reminded me of a famous quote: "Boards don't hit back." Boards do hit back when finger pushing them into the blade. Also, working on a table saw with a long sleeve shirt can pull your whole arm into the blade faster than Bruce Lee. You do great work! Stay safe.
Thank you for your comment 👍
Muito bom trabalho. Uma boa aula
Great fence build...! I just messed up my fence and was dreading trying to find another one for my old table saw. But now I'm going to try and build this one. Thanks you so much for sharing your idea and time. New subscriber and follower now!
Thanks for your comment 👍. I wish you good luck in your work.
Me alegra haber encontrado este primer video tutorial muy explicito. Muchas gracias por las medidas y más.... Saludos de 🇬🇹.
👋 Gracias por tu comentario.
Off to my garage to build one for my bandsaw.Thanks for sharing.
For a band saw, that's what you need. Thanks for the comment.
Super !!! 👏 ça faisait longtemps que je cherchais cette astuce 👍 merci 🙏
Thank you very much 👍
Very good job, and perfect design
Thank you very much for your comment 👍👍👍👍
Nice job! Why do you need to make a pull from the threaded stud to the other side of the stop? Why can't you make a clamp in the same place where the handle is?
Thanks for the comment. I did it that way, but when I started sawing, the back of the fence was leaning to the side. That's why I made a pin across the entire fence so that the clamp would be on both sides.
Very nice , simple and extremely practical! Thx
Thank you very much for your comment 👍🙏
Awesome, thanks so much for sharing your video. How did you know I needed this so bad? 👍🏻
Thank you for your comment 👍
Fantastic job! Do you have a cut list for it? Did you also make the saw table? Really nice job.
Thank you very much for your comment. Cut list: 865*70-1/. 950*70-3/. 70*40-5/. 60*90-2/. 100*90-1/. 100*250-2/. 60*70-3.
You are a genius
Thank you very much 🙏
Very nice work and design
Thank you very much 👍
Adorei. Vou fazer para minha Makita MLT100.
Parabéns.👏👏👏👏👏👏👏
Obrigado pelo seu comentário 👍👍👍👍👍
Thanks for the post I needed this
Thank you very much for your comment 👍
Good video.
Question, how does the saw stay on without you holding it?
Thanks for the comment. The saw is screwed to the bottom of the table. I have a video on my channel where I make a table saw. It's called how to make a table saw and a table saw fence.
😊 ótimo trabalho.grata por sua partilha.
E obrigado pelo seu comentário 👍
hi , thank you for great video , whats your table saw dimension ?
Thanks for your comment 👍. The dimensions of my saw table are 1100*800 mm.
Good job! Thank you.
Thank you very much 👍
Nice job
Thank you very much 🙏
On my To Do list. Thanks.
Good luck. Thanks for the comment.
Maravilha, parabéns Brasil
Obrigado pelo seu comentário
Um excelente projeto, fácil e pratico.
Thank you very much for your comment 👍
Great, i like it, thank you
Thank you very much 🙏
Hello again sensei. Tomorrow my tools finally gonna arrive. I am going to build these.
Thickness of off wood used is ply wood 10mm?
Also width of your table saw is 800mm so if mine is 600mm I have to shorten the 865 to 665 and 950 to 750 the rest is exact same am I right?
Yes. That's right. Good luck.
Ingenious 😃
Thank you for your comment 👍
Sensacional!! Parabéns pelo projeto e muito obrigado por compartilhar!!
👍👍👍
Veo que agrega leña y mas leña,y no se ve seguro 😊😊😊
gracias por el comentario 👍
buen trabajo, un saludo
Gracias por tu comentario 👍🙏
Tutorial yang sangat bermanfaat
Thank you for your comment 👍
Bravissimo, ma per vedere la tenuta il tavolino deve stare fermo, bloccato , comunque bravo
Thank you very much for your comment
Bravo,bravo.....
Thank you very much for your comment 👍
Good 👍👍👍
Thank you very much 🙏
Супер! Может быть многовато винтов...Автору респект!!! НО... Попробовал повторить... Размеры указанные автором НЕ КОРРЕКТНЫ. При наличие люфта, а ЛЮФТ ЕСТЬ ВСЕГДА, параллельность НЕ ФУНКЦИОНИРУЕТ. Разочарован...
Спасибо за комментарий 👍
@@mr.IQhomemadeDIY Уважаемый автор, у Вас не все размеры корректны...чтобы были бортики сверху, высота левой и правой стенки должна быть более 700 мм, кроме этого есть ещё ошибки ...
Perfeito parabéns
Thank you for your comment 👍
Parabéns
Muito bom
Obrigado pelo comentário 👍
Justo lo que buscaba solo que tendré que variar el tamaño ya que mi sierra es una Ryobi
I'm glad I could help you. Thanks for the comment 👍
Genial 👍
Thank you very much 👍
Muito show!
Thank you very much for your comment 👍
👍
Thank you very much 🙏
🙏🙏🙏👍👍👍❤❤❤
Thank you very much 🙏
na boa,o seu vídeo não é muito claro quanto ao modo de montagem e utilização.
I showed the entire assembly process in great detail. And I think everyone who has a circular saw knows how to use a fence saw table. Thanks for the comment 👍
nike video
Thank you very much for your comment 👍👍👍
Sp?
Thank you for your comment 👍
Al ...100
Thank you for your comment 👍
You don't need that much of IQ to cut and assemble two pieces of the wood. Just be ☺careful or will loose your finger.
😂😂😂😂😂
Genial amigo 👍 gracias
gracias por el comentario
Dobré
Should square off the resess in table not the blade , good idea tho uf u purchase a bench without guide
👍
Nice job
Thank you very much 👍