BIM Preview Video
Вставка
- Опубліковано 26 лип 2024
- Read More: www.dakotadigital.com/index.cf...
Dakota Digital BIM modules allow you to add up to an additional 16 gauges to your Dakota Digital instrumentation without the need to cut extra holes in the dash or installing pillar and pod mounts to your columns or under the dash.
0:00 Intro
1:00 VFD Displays
1:33 VHX Displays
2:03 HDX & RTX Displays
2:33 Connecting BIM Modules
3:17 Outro - Авто та транспорт
Like the green n black paint scheme on that Nova.
Great video!! The host deserves a big raise!! So much good information. Quick question - I LOVE the new RTX set-up for the tri-five Chevys - is there a video or written instructions on how to customize the information screens? Keep the quality videos coming!!
Written instructions, yes, in the Display Menu portion of your main manual; look for the Group Set bits. Video coming soon!
This looks very interesting.
What protocol are the BIM modules using to send data?
CANBUS? I2C? something else?
The BIM series uses proprietary data between the outboard modules and the Dakota Digital instrument systems. But, CANBUS can be used as an input on the BIM-01-2. The full range can be seen here: www.dakotadigital.com/index.cfm/page/ptype=results/category_id=646/mode=cat/cat646.htm
What does it mean EEE message in fuel setup .
An open circuit, or out-of-range reading from the sender. Double check the wire is connected to the control box and that the system is set to the sender in your tank.
I have the 1948 Chevy truck with vhx guages how can I see my air ride pressures
Sure, just add the BIM-19-2 and sensor (SEN-03-9) for each bag.
GPS-50-2 Daisy chain with the BIM-01-2-HSN2?
When using a GPS-50-2 along with a BIM-01-2 variation, we suggest connecting the Speed output from the GPS directly to the instrument system control module, not using the BIM connection.
Is air fuel ratio an option?
Sure, this would be BIM-13-2.
What sending unit do you use for air/fuel?