Це відео не доступне.
Перепрошуємо.
How to Replace Carburetor On Predator 8750 Generator
Вставка
- Опубліковано 5 сер 2024
- Replacing the carburetor on the Predator 8750 Generator: This generator has been fantastic, but the carburetor started acting up. I managed to fix the problem for just $22.00.
" Tip Jar " Your tips can directly contribute to upgrading equipment, exploring new topics, and enhancing overall video quality. Plus, I'm open to suggestions! Leave a tip with a topic idea, and I might just make it the next video. tiptopjar.com/channelron
Parts:
Dalom Carburetor w Tune Up Kit: amzn.to/48AhzNU
Tools Used:
Kobalt tool: amzn.to/2ljSLHu
Similar lifts:
Mid-Rise Scissors Lift: amzn.to/2IxcZH0
SL6600 Mid Rise 6600LB: amzn.to/2J2vkup
Portable Mid Rise Scissor Lift: amzn.to/2Y1tDny
Film Gear Used:
GoPro HERO3: amzn.to/3sEhXJl
IPad Air: amzn.to/3PBTn7m
Soft-box Lights: amzn.to/2Ezg6M3
AMIR Phone Camera Lens: amzn.to/2EwpT5K
Editing Equipment:
Dell Latitude E6420 Laptop: amzn.to/2SHZc3I
MacBook: amzn.to/3r8icOa
Zelotes Mouse: amzn.to/2LKwJJQ
DISCLAIMER: This video includes Amazon affiliate links. This means that if you click on any of the product links provided in the Description or in the video, "Channel Ron" will receive a small commission.
I have the same generator. It got me through 7 days of no electricity in below freezing temperatures last year here in Texas. I thanked God everyday for that generator due to our home being all electric. This generator handled the load of the entire house with no problem. Only thing was it went through alot of gas but I will never complain due to my family and pets being warm and safe.
yes they like the fuel, but you can run the entire home which is nice, you hate to buy them but when you loose power you really appreciate them.
Did u let it run 24/7¿
Mine came with a different kit but your video was a huge help... Thanks a lot!!!!!!!!!!!!
I didn't read all the comments, but your fuel petcock has a removable screen in it that should also be inspected/cleaned, so the inline fuel filter isn't really needed, unless you want piece of mind that you have clean fuel going to the carb. And... usually the spark plug comes with the gap pre-set, but it should be checked prior to the swap. You never know if it's been damaged during handling, or shipping. Also, last thing... if the air filter element did not come pre-oiled, then you should use new, fresh engine oil to oil it for maximum filtration... this ensures that your foam element stays pliable so that it doesn't dry-rot if you forget to change it out, plus makes it sticky so that any dirt or foreign debris gets stuck to the element and doesn't pass through to the carb. Good vid!
Put the kit on following your directions and it was so easy. My generator is over 6 years old and now runs like new.
Great video Ron, I was able to replace the carburetor, recoil and fuel tank valve on my Predator 4000 that hadn't been run in 6 years! Thank you for this great instructional, couldn't have done it without you.
Thanks for sharing
Thank you Ron for your instructive video. I just replaced the carb on my 6 year old Predator 8750 following your instructions. Went without a hitch and the generator started right up!
Excellent!
Thank you so much. Generator wasn’t starting 2 weeks ago, bought the kit, did everything, started first time. Ice storm coming tonight and we will probably lose power, you are a life saver.
Great to hear!
Just found your video and ordered the carburetor kit. My 8750 probably has a dirty float bowl or clogged jet that I can't seem to get to because of the electric pod that is attached over the float bowl. The screws are on with Loctite I guess because they will not turn loose. This kit is an easier way to fix my starting problems this year.....thanks!
Thanks for the video. I had an issue with the generator leaking fuel between the carburetor and the spacer. I contacted Harbor Freight technical assist. They were no help. I stated that i thought that I need a gasket to stop the leak. They told me i could order the part from them, but it would 10 to 12 weeks. I stated that there had to be another alternative. They told me about a website called generator guru. I contacted generator guru , and for $17.00. I got 3 gaskets only. Mad at myself for not doing a UA-cam search before contacting tech support. Lesson learned.
Thanks for the site generator guru may need it for myself, glad that you are up and running.
Perfect Instructions, Thank You.
I have an identical generator. Great generator but is getting harder to start. But that's okay. I've had it 5 years now and it is time to do some maintenance. Thank You for the tuneup information. I've ordered a kit and thanks to your video, I stand a reasonable chance of success tuning it up. Once again, Thank You. Very helpful.
Check out my video on the fuel line you must not use the line that comes with it! ua-cam.com/video/YNXInhcnfOA/v-deo.html
Great video. Really helped but watch buying the cheap carb. Mine was defective and had to order a $40 one. It runs great now.
Thanks for the video and the parts link in your description. I don't have to do this yet, but I will at some point I'm sure. It's nice to know you vid is here for me when I need it.
Thanks again and and God bless.😊👍🏽
No problem 👍
While not exactly the same as on my pull start 6500, this was close enough to get me through it. Thanks for sharing!
Thanks Ron, I was able to get my 8750 working quickly after getting the new carb kit.
Nice work!
This video was a huge help. Thank you!
Thank you so much for this video. It really helps out a lot. I really appreciate you taking the time to make this video.
You're very welcome!
I'm going to change one for the first time to see how it goes, thank you very much for the video channel Ron
Good luck!
Very nice ! Thanks for sharing ! 👍🏼
Naples, Florida !!! 🐊
Thanks for watching!
Ron.. I own predator 8750 brand new. Never used it. It has been sitting in my shed for 4 years. I start it up every 4 to 6 months. Ran excellent. This year I neglected it by not starting it up.. I reside in Florida. Hurricane Ian was one day from reaching Central Fl. Ran to my shed. Opened gas tank poured 2 gallons of fuel. It cranked up and ran for about 5 seconds..
I noticed gas tank metal cap was oxidized. I see in the tank a brown fine sand. I drained gas from tank and cleaned it. When I poured gas in tank the gas valve started to leak. Mind you generator has never been used. I am hoping you or some of your followers have some good advice. Not sure if I should crank it up with out further maintenance..
Just flush and try, if it were me I would take the carburetor apart and clean it.
@@channelron3593 I followed your advice. Un installed carb. Followed your video and a few hours later generator is running like new. Just purchase Sta-bil gas treatment. So Ron. Thank you for your video. I feel like I just graduated from Ron You Tube Tube University.
Be well.
A really good video. Two things viewers might find useful to know: on my 4-year old Harbor Freight 8750, I needed to take the plastic cover off the electric controls to connect the wires that run from under the carb. Easy, but took a minute. Also, the spacer that's now in the kit was a spot-on copy of the previous one and I was able to use the new one.
An hour later, the generator started on the first pull and ran flat out steady without the choke. Weirdly, the plastic arm that controls the choke keeps popping out and falling behind the air filter housing. I'll have to think about a way to stabilize it while allowing it to turn.
Not sure why the choke keeps popping off? sounds like you have a good handle on it, Thanks for supporting my Channel.
thanks for the information. I believe I have the same one as you!
7:20 u lost that screw?
I got the same kit work great and easy job to do on my 8750 generator.
Great, very helpful, thank you Ron
Very welcome
Muy buen video mil gracias
If you store it with gas in it only use ethanol free gas. I run mine monthly for about 15 mins and shut off the gas and let it burn all the gas from the carb. It's been sitting outdoors covered with a tarp for about 5 years now. Still starts with 2 pulls.
These replacement carb kits are all over Amazon and EBay for under $25, many come with spark plugs, air filter, and gaskets. I just ordered a new one and it came with the auto choke upgrade so I have to figure that out now.
Nice and auto choke! Will have to check that out.
Thank you Sir!👍
Most welcome!
Great video, I will definitely try this. My generator is doing the same thing, the throttle is searching like your generator was doing in the beginning of your video. I'm hoping this will work, my generator is only a year old and I only used it a total of 4 days on a power outage.
Many times it's caused by some of the tiny holes in the carburetor emulsion tube being dirty/clogged. This has happened to mine a couple times from letting it sit without draining the gas from the carburetor. I didn't replace the carburetor, just cleaned it to fix it. Now I always drain the gas from the carburetor and tank before storing it.
@@iraborton3941 Thank you for the info, I will definitely drain the fuel next time I plan on storing it. This is my 1st generator and was unaware that this has to be done to it. I figured just adding fuel stabilizer was go enough.
work great for me, may order another just to have on hand.
Thank you!!
Just found a big problem with the fuel line it came with the ethanol in the gas will destroy the fuel line, causing it to leak, I am going to do a follow up on this.
5 years and over 200 hours on my Predator 8750 with the same carburetor. I always shut the generator off by turning off the fuel and letting it run out of gas and every year if I have not ran it in six or seven months I will change the fuel. Oil change every year and switched over to an NGK spark plug that's the only thing I've done to that predator in 5 years and it starts on the 2nd pull just about every time.
Great generator I also shut the fuel off, from what I was told is up hare in the north east the ethanol that is in the fuel does not help? Thanks for watching.
@@channelron3593 I to live in the Northeast and you are correct the ethanol fuel will take out these small engine carburetors very quickly if it's left in the carburetor to soak.
Whats the ngk spark plug part# that you are using?
Very informative video, thank you! I am interested in the enclosure you have for your generator?
Coming soon! have been ask that before.
Yes, please do a video on your enclosure
Hi Ron! Excellent video. Thank you. I bought this kit and did the carb change -- the generator would cut after running for 30 seconds, so changing the carburetor worked. HOWEVER, the new carb keeps opening and closing once the engine is set on run. I am not sure how to remedy this issue. Can you advise?
Hmm am not sure, You have the linkedes set up correctly? It sound like the governor setting may have been moved?
@@channelron3593 Thanks for the reply! I think I got it working correctly. Made the adjustments, as advised.
Hello Ron. I bought the kit, did not come with manifold/space or filters. I installed exactly as you prescribed. Plugging in the solenoid was difficult as the receiving wires were tucked up behind the controls. Problem. The engine started right up. However, is surges with linkage bouncing like there is a 20 pound trout on it. The engine runs better close to choke and will not run at all wide open. Sounds like maybe vacuum leak. Could they have given me the wrong gaskets? The wire to the plug is cracked but I do not see any arcing. Any Ideas. Thanks
Mmm not sure The vacuum leak maybe? when running spray a LITTLE starting fluid around the carb that will tell you if you are getting air around the gasket, Just a LITTLE. also when you put the linkage back on did it line up correctly?
Hey man great video. I have the same generator. I don't know how to drain the fuel. I have bad gas in it. Can you please help? Thanks either way.
Sorry to get back to you late, pull the hose on the bottom to drain gas.
muito bom abraços valeu
Thanks
Hi maybe you can help me out I ordered a carburetor for the 8750 the only way it runs if I leave the choke on there is a sticker on the generator where it said start and run the generator will only run on the start mode can you please help me thank you and it's a great video
Mmm I'm wounding if the flout is not opening up enough? I would try dropping the bowl and check that fist, I know its new, but I would start there. also check for any air leaks between the carp and engine could be taking in to much air. you can do this with starting fluid, just spray a "LITTEL" around the carb and engine and see if the engine changes, if so then you may have a gasket problem.
I just ordered the kit but also notice that my sprk plug wire is cracking. Any idea of a replacement?
if just cracked maybe some electrical tape?
Did you have to adjust the converter?
No
What kind of spark plug it take ?
Sorry I took so long to get back to you, the plug that came with the kit is an F7TC amzn.to/2LUaos9
I can't find your reference to the source for the tuneup/carburetor replacement kit. Please provide. Thanks
it should be in the description. amzn.to/3Hf3idC
Oops, I'm sorry, you're right. It's unavailable. Let me see if I can find it.
Found it amzn.to/48AhzNU
Is the generator clean power
No not really but I have had no problems with my home appliances.
Does anyone know the size of the carburetor screw to drain the fuel? I need a new one. Thanks 2:01
Good luck with that one kept having to take apart my 4000 watt predator generator over an over the tank continues to collect trash after cleaning over an over until I have a small leak on the bottom of the carburetor where that screw goes it will strip sooner or later an you will have to eventually buy a whole new carburetor
I must admit the 4000 watt predator generator runs real smooth just have to unplug before you turn your generator off use not to now it has built it's magnetism back up they run real quiet an smooth, keep the oil change an an put a new spark plug in so many hours I use ngk an keep your arrestor clean other then that they are really good generators my kids runs everything their phone chargers, PS5 games an tv, refrigerator an air conditioning I give predator generators the thumbs up
FYI. Those paper fuel filters are designed to be used with a fuel pump, if you have trouble getting fuel to the bowl, dump that paper filter and go with a screen filter.
Do you really need a fuel filter with this generator, considering that it didn't come with one?
@@spidey197012 i don't have a filter on mine.
It came with it so I installed it, cheep insurance, maybe that is why I had to replace the carb? maybe dirt got in. Thanks for watching.
You may find there is a filter on the petcock inside the fuel tank.
Here’s a very important video that everyone really needs to watch ua-cam.com/video/I1jT3ANENvI/v-deo.html there’s an advice that is really important for everyone. Thank you
Cleaning a dirty carb jet =$0.00, time 10 min
It was good until I realized my spark plug wouldn’t go back in. Tried the new one and then the old one, neither would go all the way in
Somethings not right?
@@channelron3593 yeah turns out the thread was bad. Seems to be a common qc issue.
O
I have that generator, it ran once and would not start again
Not good, Check for spark if so try a little starting fluid could be a simple fuel problem.