Suzuki 350 Outboard Motor - First Oil Change. How to change the oil and filter on your Suzuki
Вставка
- Опубліковано 5 жов 2024
- Changing the oil and filter on your Suzuki Outboard motor is SUPER EASY. Suzuki 350 Outboard Motor. Use Ecstar Oil.
PLEASE SUBSCRIBE!!
Thanks for watching!
Great video thanks for sharing. I don't understand for the life of me why many outboard owners insist on putting automotive oil in their expensive investment when the outboard manufactures, mechanics and dealerships tell you not to. Just spend a few dollars more and use an approved marine oil. You can't go wrong with the factory oil.
The finger dab of oil is so it lubricates the rubber gasket. Without it, the gasket could tear when it comes into contact with the engine block, and you keep tightening it down, which could then cause an oil leak.
A good tip I learnt about draining motor oil. Is putting a no holes plastic bag over the oil drain pan so the pan is inside the bag, so that it catches the oil keeping your pan clean and you can remove the bag containing all your oil. Cheers
Nice setup! Great idea with the filter.
Can you do a video of the lower unit removal, and water impeller change?
I may be able to do that soon. Thanks Rich!
Good video thanks
Been over two years now. How's the motor holding up? I've heard stories of the early DF350s blowing lower unit seals religiously and other powerhead issues. Some owners got lucky with the early DF350s and never had any such issues with them.
Everything is great! Haven’t had a single hiccup. 👍👍👍👍👍.
Mine is 3 years old. I took delivery in March 2019 and it was built a few months before that. 👍👍. All good. Love it.
great video thanks
Thanks brother!
Hi Mike, the new boat looks great, what dual prop size are you running on the 350? I'm running 15.5x22.5 on my Suzuki 350 with my SeaPro239... awesome combination....SeaPro + Suzuki Dual Prop ....SeaPro rules....Regards, Steve Petix
Steve Petix hey brother. Thanks. 26” pitch. 15.5.
@@MikeSmedleyOLDSCHOOLSTRIPERS whoa! 26" ! What rpm are you hitting ? I was thinking of moving up to 24" how do you think 26" wheels would run on the deep V hull?
I think 26 would be too big for a deep V. They do a good job pairing them up at the plant. With the 12” jack plate I can hit 6000 even with 3 guys and moderate load. 54 mph. Full load full fuel and 5 guys I can hit 5600ish. 50 mph. Haven’t run wide open with only myself yet.
@@MikeSmedleyOLDSCHOOLSTRIPERS thanks for the advice Mike, I'm hitting about 48mph at 5600 rpm also have a 6 inch jackplate installed by SeaPro. I think the culprit is multi layer ablative bottom paint, I keep the boat at a slip on LI Sound all season, so I had to use anti fouling, I may strip it off next year and try the semi hard ablative that Petit makes....I also read some guys are using the 19.5 inch prop, anyway ...thanks for your feedback...going wreck hunting for Sea Bass tomorrow....
have a video for the 100 hour service?
Surprised you didn't change lower unit oil too ?
It can never hurt
GEORGE K next video. 😉
What size boat is this? I'm considering is the DF350 will be enough for a Blazer Bay 2700? Comparable to the Yamaha XF425 the difference is 8 mph (Top End) with almost 1 MPG difference at cruising speeds in favor of the Suzuki.
It will be more than enough for your 2700. With the high compression of the Suzuki it feels like the torque of a diesel. My boat is nearly 25 ft with a 26” prop. You just need to prop down to a 24” or 21”. That motor will launch that boat👍👍
@@MikeSmedleyOLDSCHOOLSTRIPERS thanks for the advice brother!
i have a question: are the geki models steering by wire?
Fly by wire and power assist steering. Incredibly smooth.
Hey Mike about a month ago I asked you about a 248 with a 200 Suzuki. I bought it and love it. Does just fine for me. Few questions if you don’t mind. Had 47 hrs when purchased. Now 81 hrs. Should I change the oil now or at 100 hrs? Where do you buy all your stuff for oil change, spark plugs , foot gear lube? Came with a lowrance hds 12 live but has through hull transducer only. I need a transducer on the transom. Looking to buy another hds 12 so I will have two on the console. Is the through hull transducer ok to keep for the graph that came with the boat and get a transom mount for the second graph. I’ve seen the 3D structure scan box but not sure if I need it. I’ve never owned lowrance before so I’m kinda clueless on all the add ons. Any advice would be much appreciated. Thanks
Suzuki recommends 100hrs, but they said you can a bit change sooner if you want. You can get the lube and filters online. The book has all the lube weight requirements, I don’t remember them off hand. What transducer model is it?
@@MikeSmedleyOLDSCHOOLSTRIPERS not sure what model transducer it is. I probably need to talk with a local dealer and see if they can recommend what I need Have you had any problems with your live well lids When it gets hot outside mine seem like they are expanding and want close back down.
@@stuartjenkins9151 unfortunately dealers don’t really know much about sonar and transducers yet they will still tell you what you need 😂. You probably have a B60. Sea Pro puts one in every boat as basic equipment for its reliability but you can upgrade when ordering the boat. Open the battery lazzarette and read the label on its back. I had my stern lid get stuck once in extreme heat. Ran water over it and it popped open. It was in a hot parking lot all day. Never sticks on the water.
@@MikeSmedleyOLDSCHOOLSTRIPERS I just got a contact for a guy that installs electronics. Going to see what he has to say. These Lanier stripers are hard to catch if you don’t have good electronics. Right now they are constantly on the move. Thanks for always responding and the advice.
So how do you like the motor after a year looking at a yellowfin with trip df350a
Really love it. It’s a very “different” type of motor than I’ve ever used. The high compression and dual props make it behave like a diesel in a way. Incredible torque and power when fully and over loaded, top end empty and full are nearly the same which I absolutely love because of the rough conditions and heavy loads I see. It’s not a top end race motor though, it’s a serious work horse.
Did the motor come with the tool kit or was it the 20 hour service kit
It came with the motor.
I have been trying to figure out the best way to run my transducer cable into my boat and noticed you have your active imaging mounted backwards on the mount plate. What changed from previous videos regarding your transducers?
I didn’t like the way the wire was pinched so I reversed it.
After how many hours should you change the oil..??
After initial break-in Suzuki says change oil and filter every 100 hours.
Good video but Suzuki don’t make oil so any outboard oil will do just fine
Thanks! Ecstar is the oil Suzuki makes.
@@MikeSmedleyOLDSCHOOLSTRIPERS yes I know that is the oil what I am saying is any oil that’s for outboards will work. Suzuki doesn’t produce there own oil they buy/have a company make it for them
Hey guys I need ur help, gonna buy a Bestauto SS13712 12 Quick Connect Rotary Steering Package with 13" Wheel
For my but and I don't know witch motor remote control should I buy for it on Amazon .. Can u guys help me with that please?
Boat***
Shoot me an email. Mikesmedley9@gmail.com
you forget the gear oil
Shoots out under pressure lol, get to work on that sidewalk :)
Mark KIDCOCHIESE Garry 🤣🤣
Did you hear Tommy laugh when I said it comes out really well?
@@MikeSmedleyOLDSCHOOLSTRIPERS thanks for this, not kidding. I left the oil cap on until I got the flow started and didn't get sprayed. I would have if I hadn't read this
I'd still like to see a gear oil change video
charlesaf3 ha!! Glad to help! 😂😂. The gear oil is easy but it takes 11 quarts!! Make sure you have enough.
funny to look somebody do my job
quit playing with your dip stick
I’ll try. 😉