K-Burner Laser Engraver - MKS TFT24 offline controller
Вставка
- Опубліковано 18 вер 2020
- In this video I try MKS TFT24 with attach to the mainboard MKS DLC grbl control board.
engraving speed 15000mm/min
6watt neje master laser module
10x13inch of work area - Навчання та стиль
Excellent working
thankyou
Fantastic video
thankyou
Bagus banget
Hallo, sind die Stl Daten frei zugänglich, wo kann man die finden? Thx 👍🏻😉
Hola, ¿siguió algún tutorial para ensamblarlo? ¿Tiene el firmware que uso?
Can you provide the stl file fot the pulley connector, aluminium profile stand + additional cad files please. Please add these extra files to thingiverse where you provided previous files.
Can you tell how to make this
May I ask how the laser was connected? It appears that you had to split the wires on the board. Thanks
black n red is positive and negative connect to 12v output or can direct to power supply 12v. the yellow wire is pwm connect to pwm pin
Any recommendation to buy the same board as you or something different? and how to upload software to board?
can buy on aliexpress.search MKS DLC..can open GRBL website, all of you need is rigth there for firmware, software and how to upload it
@@MrAppleorange90 thanks 😊
Any recommendations on a mode of laser/driver that works well with the MKS DLC 2.0 you have?
i use neje master laser module.work great
@@MrAppleorange90 I purchased One from that brand that looks similar on eBay. Thank you.
friend i'm using li,ghburn to create gcode. when i send it to sd cart the boarders machine makes are different size, do you know why ? which software are you using for gcode
ligthburn better connect directly the machine to the pc. im using engraver master
can you give stl files and details
Awesome project! Would you like to share the cad of the 3d printed parts?
Greetings!
It's in his last video
thanks
hello same setup when connected to PC does not work correctlu because of TFT screen, how can i solve it. without screen it works
if using pc the tft should be disconnect and when using tft usb cable to pc need disconnect.cannot using both in the same time
hello, is this board can use for more power of laser such 80watt?
yes can. usualy more power laser use separate power source.so the board just give the signal needed
how to connect 3 pin on laser to the shield?
Maaf mas mau tanya, buat generate gcode-nya pake software apa ya?
Terimakasih 😇
byk software ada..blh guna lasergrbl
how to set step mm in this board?
using command $100, $101 and $102 for X, Y and Z axis respectively
apakah bisa dr grbl offline tsb dihubungkan ke arduino / CNC shield nya?
ke.pin mana saja ?
tx ya
boleh rasanya..kena tgk skematik litar board mks dlc ni tgk mcm mana.atau blh try google
بكام
Excellent working
thankyou