Lathe Chuck Removal (screw on)
Вставка
- Опубліковано 26 жов 2022
- How to remove a screw on lathe chuck the easy way and with less chance of damage to your chuck.
This video shows the use of a simple bit (off cut) hex bar to easily remove the chuck.
If you have any top tips let us know in the comments, cheers.
Warning, machinery can be dangerous, I do not recommend the way I do something and if you copy me do so at your own risk, thanks for watching. - Навчання та стиль
I don't have a lathe with a screw on chuck but this is a great tip. Cheers.
Thanks for the support.
Definitely a good idea
Cheers Craig
Good tip!
Thanks Woody.
Great tip thanks, been trying to figure out how to get my boxford apart.....now I've seen this it's obvious, just use an Allen key then you have a lever there too and if it's stiff stick a tube over it
Cheers, yep I use an allen key for a while but always ended up using the allen key for something else so was never there but the hex bar doesn't get used for owt ele so is always (!!!) on the lathe waiting. Thanks for watching.