I’ve been wanting to give my assessment/experience of the presenting doors. Where do I begin? The installer was able to get the driver side installed but could not get the passenger door installed properly. The passenger door would only open half way and whenever you tried to close the door, it would slam the door shut. We went around and around for 6 weeks trying to figure things out. The installed changed all the parts but still got the same results. Finally, Hannshow looked at the wire harness and realized that they had reversed the wires. We were instructed at reverse the wires. That worked. Still, there are other issues with the passenger door. The door will not set to the full open width. It only opens about 75 percent. It you close the door from that position, the door closes. If you push the door fully open (it won’t set to that position) whenever closing, the soft close works as designed. Since I can’t get this figured out, I’m living with it. Now on to the other issue, the driver door, the passenger door may or may not open whenever you approach the sensors. It’s a hit or miss. It’s not consistent it’s just weird. I’ve dealt with this issue for about 8 weeks and I’m so over it. The installer is 1 hour and 15 mins away. I just couldn’t keep going back and forth. Final thought. It’s a great concept. I just hope you don’t have the issues that I have.
Our Installation and/or Pick Options at Tes Studio: tesstudio.us/ 14761 Franklin Ave Unit E, Tustin, CA 92780 Call for Questions and/or Appointment at (657) 565-1007
I’m having issues installing and can’t find the #2 connector for the door at this point, not sure where it connects, some more detailed instructions where to find the connector that goes to that would be super helpful
No way I could do this without 1) damaging some important part of the door 2) losing a screw 3) voiding my warranty. Also - more parts to eventually fail.
HI IF I HAVE MINI DASH SCREEN DISPLAY CONNECTED TO ORIGINAL OBD BLUE PLUG (ORIGINAL VEHICLE)MODEL Y HOW CAN I CONNECT AUTO DOOR HANDLE THEY WILL GIVE ME SPLITTER?
Hansshow's Auto Presenting Doors are slow opening and are temperamental, I would not recommend. Here are a few issues - If you stop the car in your driveway or curbside while in drive, and the passenger pushes the open button to open the door, the door opens, but you need to push it all the way open, at this point, you need to put the car in park, push the door button to close the door, unfortunately the door will close but not all the way, you need to push the door back out and repeat, sometimes this works, if not you need to push the door out and then pull it closed. There are other times while in park, you push the button to open the door, it opens an inch, you push the button again and it opens into the car door next to you. These Hansshow aftermarket parts are not yet ready for the consumer market. I’m at the point to ask the installers to remove all items and return everything back to stock. Tes Studio install costs. Auto present door handles for v5 pro , labor is $900 Labor for v2 auto present doors is $1800 for front 2 doors.
I’ve been wanting to give my assessment/experience of the presenting doors. Where do I begin? The installer was able to get the driver side installed but could not get the passenger door installed properly. The passenger door would only open half way and whenever you tried to close the door, it would slam the door shut. We went around and around for 6 weeks trying to figure things out. The installed changed all the parts but still got the same results. Finally, Hannshow looked at the wire harness and realized that they had reversed the wires. We were instructed at reverse the wires. That worked. Still, there are other issues with the passenger door. The door will not set to the full open width. It only opens about 75 percent. It you close the door from that position, the door closes. If you push the door fully open (it won’t set to that position) whenever closing, the soft close works as designed. Since I can’t get this figured out, I’m living with it.
Now on to the other issue, the driver door, the passenger door may or may not open whenever you approach the sensors. It’s a hit or miss. It’s not consistent it’s just weird. I’ve dealt with this issue for about 8 weeks and I’m so over it. The installer is 1 hour and 15 mins away. I just couldn’t keep going back and forth.
Final thought. It’s a great concept. I just hope you don’t have the issues that I have.
after i installed the front passenger door handle it's acticated but door unlatch/not open from outside, do you know why?
Im too old for this work, gave me heartburn just by watching video
Our Installation and/or Pick Options at Tes Studio:
tesstudio.us/
14761 Franklin Ave Unit E, Tustin, CA 92780 Call for Questions and/or Appointment at (657) 565-1007
@@Hansshow_Official wish Hansshow had installers in east coast
I agree
Can the lights stay on fulltime while driving if you choose?
I’m having issues installing and can’t find the #2 connector for the door at this point, not sure where it connects, some more detailed instructions where to find the connector that goes to that would be super helpful
No way I could do this without 1) damaging some important part of the door 2) losing a screw 3) voiding my warranty. Also - more parts to eventually fail.
HI IF I HAVE MINI DASH SCREEN DISPLAY CONNECTED TO ORIGINAL OBD BLUE PLUG (ORIGINAL VEHICLE)MODEL Y HOW CAN I CONNECT AUTO DOOR HANDLE THEY WILL GIVE ME SPLITTER?
Thank you for your question please reach out to our technical US team. www.hautopart.com/pages/contact-us
Hansshow's Auto Presenting Doors are slow opening and are temperamental, I would not recommend.
Here are a few issues - If you stop the car in your driveway or curbside while in drive, and the passenger pushes the open button to open the door, the door opens, but you need to push it all the way open, at this point, you need to put the car in park, push the door button to close the door, unfortunately the door will close but not all the way, you need to push the door back out and repeat, sometimes this works, if not you need to push the door out and then pull it closed. There are other times while in park, you push the button to open the door, it opens an inch, you push the button again and it opens into the car door next to you. These Hansshow aftermarket parts are not yet ready for the consumer market. I’m at the point to ask the installers to remove all items and return everything back to stock.
Tes Studio install costs.
Auto present door handles for v5 pro , labor is $900
Labor for v2 auto present doors is $1800 for front 2 doors.
Will this void Tesla warranty
Seems like your question was the only one they didn't respond too.
No video after it was complete
We have other videos on this channel showing it in action! Check it out!