350z Automatic Window not closing fix! How To: Window Motor reset
Вставка
- Опубліковано 22 лип 2019
- Follow the restoration project!
Instagram: @Rydlandproductions
Truck Instagram @Dirtymax302
-----------------------------------------------------------------------------------------------------------
Music:
Big thank you to soundcloud artists! Music Info Below!
/ joakimkarud
/ user-489190200. .
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library • Adventures - A Himitsu... - Авто та транспорт
Great video helped a lot lol!
It worked! Thank you!
This happened to my passenger door when I bought my Z. I reset it and now it’s doing it again so imma assume the motor is failing since it is pretty slow. Good video 👍🏽
Thank you man I had the same issue and did what u did and it works thank you
Glad I can help!
He did not say what he was doing, but it looked like this...
1:13
0. Close door
1. Put window in the full up position without using Auto up
2. Push and hold down the button for 5 seconds
3. Then put the window in the full down position without using Auto down
4. Release the button
5. Test
I was trying to do it as I filmed the video and it was kind of tough and I tried my best
@@ConnorRydland
Really appreciate that you made the video. Now I know what to do 👍
Did you ever have to do reset the window more than once?
Based on everything you know about this specific 350Z issue, what do you think about a permanent hole (with a nice hole cover) on the door cover to save time?
What exactly did you do
I was wondering why there is a hole in my passenger side door panel. I'm guessing the window kept doing this so much. The previous owner just cut a hole in the door panel.
you didnt even say what you did dawg...
What if the windows only roll down or up with the key but not with the switch, and is only happening to the passanger side.
Sounds like a connection issue, I’d pull off the switch and see if it’s disconnected, I’m not entirely sure tbh
Thank you, one of the connectors was a bit lose, I cleaned and its working now. Thank you
@@JorgeGonzalez-dl5fw you’re welcome!
My window doesn’t pop down a bit as I pull the handle. Anyone know why??
Vince Gould hmm have you troubleshooted the sensor? Odds are you have to do this reset for that to happen to re-calibrate the system
Connor Rydland what exactly does that mean? I’m all ears.