I Fixed All The Frame Damage On the Subaru With A Ratchet Strap!!!
Вставка
- Опубліковано 5 вер 2024
- Get Solderstick at 20% OFF with discount code "VTG20" at www.solderstic...
What's going on guys in todays video we Finish All the body work on my Subaru!
------------------------------------------------------------------
Check out my brothers! Channel / 23rdgarage
Subscribe! ► / vtuned. .
Instagram ► / vtuned
----------------------------------------------------------------------
Get Solderstick at 20% OFF with discount code "VTG20" at www.solderstick.com/sale
Thanks, I have been looking for these since the Goonzquad boys used them. I appreciate the discount code, Ben.
Some company needs to sponsor this man a frame machine
He had a portable one that a company sent him or he bought
@@johnnormanhuntprobably sucks
Guess he will eventually get there. Prefer watching vtuned to goonz.
@@deffstar69absolutely agree with you. No more Goonzquad for me.
@@miguelcastilloq it's cringe and fake as hell. Show us the heatin an a beatin
Time for a trade, show the Goonz how to use their frame rack to fix the frame on that G Wagon and use their paint booth in return..
Vtuned, you have to STOP kneeling on hard surfaces without knee pads. When you do that, you are forcing the knee cap to absorb your full body weight, which can cause serious problems in the long run. We are learning a lot from you, let's hope you learn a lot from us.
That is very good advice. I'm 58 and in my younger days never used kneepads working. I'm paying for it now with bad knees. When you are young you don't worry about it. Young men need to take your advice, believe me, when you are young your best investment is your health.
@@Coda6766 Absolutely, but if you have noticed, Vtuned is still choosing not to wear knee pads even after reading our comments. If only we could put his brain on a frame and straighten it out.
@@petepuma7008 like they say 'you can lead a horse to water.........'. I was the same way when I was younger, just stubborn. Look where that got me, 2 bad knees and a limp.
Maybe by the time he's old enough to notice, there will be a youtube channel for DIY orthopedic surgery.
this is what's great about your channel. you show how to do stuff with no cost or little cost. you didn't need a big fancy warehouse and top of the line tools that the normal person doesn't have. you just seem to get it done with what us people have in our garages. good for you for showing this to us. please don't change on how you're doing videos with trying to get us to buy a bunch of crap and win a truck or tool sets.
Hating on another channel without saying your hating on another channel… 😂
Shout out to the bro who knew it was blown fuse 👊🏾💥👍🏾
You have such a talent for these projects. Amazing work!
"Simple simple fix",.. words of a master of his trade. Loving your videos and the explanations! Respect!
Those little wire connectors are the shit. Used them once and I bought thousands lol won’t use anything else now. I still use heat shrink after for extra protection but still worth every penny
Did a 24 hour race at Nelson Ledges back in like 2008 or so. One of the guys rolled a VW into the tire wall at 2 AM and it made a big mess. I finished my stint at 3AM and took a walk to cool off and calm down to get a bit of sleep. The VW was sitting in the concession area and the crew were pulling the car "straight" using ratchet straps and a backhoe. The car finished the race albeit many hours down. But those guys never gave up. We finished 4th because some idiot in a Miata (Its ALWAYS a Miata) knocked me off the track in turn 1 with an hour to go in the race. Big fun back in those days.
Ben your the boss you make these repairs look easy,but we know better, great job on the Subaru great video 👍👍👍
Listen man… the suppliers of frame machines need to get on board with you and sponsor a frame machine… free advertising for them like they can’t imagine.. keep doing what you’re doing brother even with the simplest of tools. You’re a NATURAL in the field..
He said he doesnt want one in his shop....
4:15 What you did wrong here: normalley it's better to not cut all the same spot so that you don't have a thick spot when all three wires are inside a sheeting/shrink wrap
You Boys are Master of Pulling watching the Guru all your Lives, Props to Pops!
Vtuned definitely my favorite!!! Just gets the job done.. plus always flexing his skills even if doesn’t have the equipment on hand!!
Ben your work is the best in the game!!! I have followed you from the start!!!, but brother you need to hire you a driver as everything you fix it seems gets wrecked again!!!! 😂😂😂
Ben, just paint both fenders so that it will match the front end of your subaru. And try to paint the rims with a dark gray shade. A gloss black is very visible to deep scratches...cheers!
Use a mini torch for the solder stick. The heat gun only melts the shrink tube.
Your video are so much better now you doing the more minor fender benders is so much more plesant to watch and is encoraging for others to get in to doing their own reparis your doing a great job keep it up!
You need to either vacuum bleed the cooling system or use a coolant refill funnel and let it burb for 30mins. If not you risk head gasket damage with air pockets and or overheating.
When joining wires and covering with heat shrink, its better to do a staggered cuts: this will allow for thinner wire bundle after soldering overall
Drinking game every time V says nice take a shot 😂
Swing on over to another channel and play it with the word "dang" 🤣🤣 you'll probably die
This may be your best episode yet. Everyone is always rebuilding super cars that most cannot afford even when totaled. I would like to see more like this where you take average low cost vehicles, get them on the road again & what you don’t sell start some giveaways. Mix in a super car/truck every so often?? Your episodes would fill a void left by Samcrac, Hoovie, the Goonz boys, etc… & your views would skyrocket!!! Again, great job!!!
14:25 you can use anything....a pillar, another car, I know someone on youtube uses a forklift.....you make do with what you got.....when I did renos on my own I'd wrap a rope around the hitch of my pickup to pull out old fence posts and stuff.
Another great episode. All about the car, not sauce, home construction, cooking. Just cars. Bravo!
Job well done bravo to you young sir not afraid to use work around to get the job done
Respect for your work brother!
Great job, Ben. Really satisfying seeing all of these projects being finished. Subaru looking good. I guess the Ferrari is next.
Don't use the lift to do frame pulls. The anchor bolts in the concrete are more for a downward and a slight side to side pressure. When you are pulling with the lift as a anchor at least 1000lbs is being exerted against that beam
Always epic content bro. Your fuse tip actually saved me with the same problem on mine. 👊🏽
They need to design the souder sticks the same colors as the wire you fixing.
Excellent job! Working your magic!👏👏
i love it when this song 5:08 comes on :)
Finishing up this one just in time to help goonsquad with the G-Wagon
Ben you have meny talents that you use to repair your car. You are so good at what you do. Take care.
Awesome connectors... just ordered 100 pack. Thanks!
I see you put a GM battery into the Subaru. I put GM coils on my ford product as the ford coils were way to expensive and they were made the same. They are great haven't had an issue with them in 3 years. i was able to get all 8 AC Delco with ford spark plugs for around 150 dollars. To buy the OEM coils it was like 800 dollars. i was like screw that and got the ac delco ones.
i remember the 60's when you lost all the gaps,tied to an oak tree and reversed back as fast as! life before crumple zones!
Another great video Ben! You did a great job!😎👍💯🦌💥🚙
Bro this is how I do frame work!
Also I think you should convert that to run on e85 they make pretty easy kits and it could be good contactfor you
Dear Ben,
I think I finally learned what kind of a Subaru you’re dealing with. I think it’s a Impreza WRX Sedan what to my opinion never was sold in the Netherlands. Anyways you’re progressing very well with restoring the car and I look forward to your next vlog and send you love from the Netherlands
@Name-Official_vTunedGarage please STOP sending me this nonsense
Great work as always Ben
When the driver crashed the Scooby he.was probably thinking "Dear oh dear." 😂😂😊
I wish I could find similar wrecks auction in the country I live. Here they are either smashed beyond recognition or have like 500,000km on the odometer
Meanwhile goonzquad has an expensive frame machine that they don't know how to use properly 😂
He can probably use theirs since they know each other and both worked on few projects together , mind you that nobody is perfect, that's their first frame machine as rime goes on they'll learn how to operate it #nohateongoonz ❤
Solderstick has been in Europe for at least 10years or so 👌 They are awsome, there are some type here with double solder in those sticks we use alot of those. 😊
I guess next video will be, you helping out the goonzquad boys with their mercedes. Great job on this one Ben.
Your welding sparks will put pits in the glass and plastic. I'd use a welding blanket to protect that stuff
Keep it coming! Great job!
I still think you forgot to press the clutch 😅😂😊
GREAT WORK ON FIXING THE CAR. YOU ALWAYS DO QUALITY WORK. TAKE CARE. 👍
Great video. Thanks for all the info and instructions
🌴It’s almost done 🤣 👍🏼. Got lucky of the Fuse bro that’s a relief !
awesome video as always man! could you do a more in-depth video about frame pulling? where to pull and what can be saved? thanks man, inspiring. peace!
Guess that second Mustang project got shelved again
Who's complaining about the ratchet strap fix? I think that's awesome. Worked just the same as a big fancy frame machine, so why the heck not?
Ben you need to go help the goonz on their G-Wagon; they look confused
What do you call the clamp you attached to the car frame then used ratchet strap to pull frame to shape
I would like to find one 😊
if that cam sensor is a china rep it may not work...i had an issue with mine, also, you may have to have the ECM relearn it, otherwise its going to read the timing is off.
Dude, you are killin' it, thinking about another banner for the shop...
Is there a little ding or dent on the drivers door? Just the edge….
Ben's back on the Adderall. Good work!
Those subaru are great cars. Easy to fix and cheap parts
You are the best bro I have been watching your videos for a longtime I look forward for every new video that you put out btw congrats on your wedding I am from miami but I am in Venezuela right now
i was thinking a whole different idea using winches but damn just a solid object that is well anchored works
really i am so ready to buy my first project car
these vids are inspiring
Are you thinking about putting in a paint bay on the side of your shop
You need to sneak in a vid of the old mustang bro , really wanted to see what you created 👍🏽
Yeah WRX can be a good rally car and make a lot of aftermarket parts that are good for them
Keep up the good work bro you're doing awesome
You should ask goonzquad to use there paint booth as they need your help again with the G WAGON 👍
Called a ‘Slam Panel’ in the UK 😁
i just orden same solderstick box 1200 pcs 5$ cheap and good repair wires. 800 pcs box cost 4 $. shipping FREE
“I watched a bunch of YT videos and all of them were useless except that one” 😂😂😂😂😂lmao😂
That is wild that that airbag cracked the windshield. What would it do to your ribs?
Use what you have...... Skills and tools can achieve much..
Ben you are one amazing fabricator
Good on ya man.. keepin it real...
speaking of Dealership You use Crown Subaru. One time they tried to convince me we needed to flush the brakes on a car that had 16000 miles on it. I laughed at them and asked if they could change my blinker fluid.
You're a freaking genius!!
you are the best in everything!!!!
He is the "Frame Whisperer"
Did exactly same thing with my car in my garage, back in the day.
There is a missing rubber piece for the upper radiator mount 11:02
“If its to small then it is a good sign”😂😂
Amazing project.
Definitely need a super wrecked car maybe a roll over or something
Vtuned gets his projects done FAST!
That will be a sweet daily!
Good work always yet don't forget to burp the system and add the Subaru additive.
Take your time vtuned. Want to absorb the build.
Thanks for the discount code, I have mine on order.😁👍
You should hit up goonzquad and use there new paint booth 😉👍
Impressive skills and methods of easily fixing your projects. 💯💯💯💯💯
If it gets the job done then it's good enough . I've pulled the bumper out on my Jeep by simply tying a strap to a telephone pole and putting it in reverse . The Mustang that bent my bumper never drove again 😂
Thank you..
Great video as always.just keep doing what your doing.should be a nice car.kudos 👍👍👍😎😎😎
Respect to that one guy!
U R Beast !!!
I'm surprised the goon guys didn't call you to help them with their new Mercedes build