Hello my friend I do like how your English is decent enough. there are many Indian electronics gurus..who explain in English, but they are not very understandable ..whereas you seem to make an effort to be clear
Рік тому+10
Watching here from Brazil, congratulations on the work
Thank you for the explanaton and video, but I have a question sir. What's that button beside the TP4056 module ? Is that the power switch ? If yes, where do we connect it? Does it just activate when the push button is used; if so how do we turn it off? I was thinking of modifying the code to shut down the device after 20minutes of idle. In addition, the link in your description states it needs a LM2596 step own converter; does that mean that 3.7V is quite strong for this device and needs the afforementioned module or is it fine without it ?
Great video, but i have 1 question. Is the 3.7 volts battery enough to power the device? From what i know the operating voltage of Arduino nano is 5 volts
In this video, i noticed that when you press the button it will send the latitude and longitude (then you watch it on Google maps)Can I make it like continuously sending the latitude and longitude information and use it in my application ? (I mean realtime GPS tracker like Zomato , Swiggy)
Tell me one thing You provided 3 different code, which code I use for this particular project? You used 2 push button but in your website there is only one push button showing in the circuit diagram, so please clarify which code we use to build this project.
Which one you want if you want 2 push button based then you used 1st one if have basic knowledge about the code then i hope you do that and if have any another problem then plz email it we try to solve your problem 🙏
If i replace the aurdino nano with the esp8266 will it work also i am a cs student i dont know much about the iot stuff but clg have given the project just like the in the video but i have bought the esp8266 ...... Please answer it will be helpfull If yes then can you make project video on it on it please
@@JustDoElectronics Hi Sir, I used the first circuit and also the first code, the code is uploading but project does not function. Also Gps and sim800 Led does not blink. What maybe the problem?
Hello brother I want to ask you that can we use an type c board instead of TP4056 1A LI-ION LITHIUM BATTERY CHARGING. AND IF YES THEN LIKE HOW THE MICRO USB BOARD HAS THE NAME as TP4056 1A LI-ION LITHIUM BATTERY CHARGING.
Why do we need sim ? I am new to Arduino plz guide ...how far can this device locate your mobile ...does it mean it is not necessary for me to have a mobile near me only the GPS tracker Arduino kit is required to set an alarm
Umm hi broo can I borrow your idea and make something more unique like a button for clothes so in that way if someone kidnap someone they can try to find help by using your idea and btw it's for my science project/research
Sir this devise all side aujesment teranning softwear what you calling this name ? Which web side downloading this softwear sir pl give me deatails pl .
I saw the code, is the ports for neo and sim interchanged, you used 10,11 for sim, but you connected it to 8,9 pins, I'm confused here. Thank you for your reply
@@JustDoElectronics I ogt neo 6m module and esp32-wroom-32 and sim900 gprs shield module, what app to use for free and I was following you since the first vid, do you have code for this?
Hello my friend I do like how your English is decent enough. there are many Indian electronics gurus..who explain in English, but they are not very understandable ..whereas you seem to make an effort to be clear
Watching here from Brazil, congratulations on the work
Thanks sir
Watching from Brazil do you have any contact is it possible to shop some of it?
@@MarceloHenrique-ls9vj They don't sell, it's a module they created
Thank you for the excellent explanation, but I have a question, please answer, what is the main role of the SIM card ?
Enlazar llamadas del Arduino al celular
If multi persons have the number saved.. Do all they receive the messages and calls??
Sir can I use uno instead of nano? Then is there any changes in coding and or I have to add some more equipment?
No Uno and nano both are same
5:48 to prevent echo feedback just mute the microphone instead of the speaker
Thank you for the explanaton and video, but I have a question sir. What's that button beside the TP4056 module ? Is that the power switch ? If yes, where do we connect it? Does it just activate when the push button is used; if so how do we turn it off? I was thinking of modifying the code to shut down the device after 20minutes of idle. In addition, the link in your description states it needs a LM2596 step own converter; does that mean that 3.7V is quite strong for this device and needs the afforementioned module or is it fine without it ?
No is lm2596 step down converter to given. The 3.7 v dv supply to gsm model
@@JustDoElectronics ohh okay, how about the black button/switch beside the TP4056 module ? What SIM is usable for this build ?
Hey, I wonder if we can change the push button into bluetooth/wifi controlling button which designed on an application on mobile phone.
Sure, once you establish conneciton with your phone via bluetooth, you can react to bluetooth messages send from the phone.
since i do not have my components arriving yet, is there a simulator out there which might have this components?
tinker cad
Great video, but i have 1 question. Is the 3.7 volts battery enough to power the device? From what i know the operating voltage of Arduino nano is 5 volts
yhh but still it can work with 3.7 too
In this video, i noticed that when you press the button it will send the latitude and longitude (then you watch it on Google maps)Can I make it like continuously sending the latitude and longitude information and use it in my application ? (I mean realtime GPS tracker like Zomato , Swiggy)
Good job. Very nice one.
Thank you very much!
Tell me one thing
You provided 3 different code, which code I use for this particular project?
You used 2 push button but in your website there is only one push button showing in the circuit diagram, so please clarify which code we use to build this project.
Which one you want if you want 2 push button based then you used 1st one if have basic knowledge about the code then i hope you do that and if have any another problem then plz email it we try to solve your problem 🙏
@@JustDoElectronicssir I have message you on WhatsApp
If i replace the aurdino nano with the esp8266 will it work also i am a cs student i dont know much about the iot stuff but clg have given the project just like the in the video but i have bought the esp8266 ......
Please answer it will be helpfull
If yes then can you make project video on it on it please
Yes is work but is few changes in the code 😊
@@JustDoElectronics it will be great if you post a video about it
Live tracking?
I'm assuming yes to a certain extent, depends on how fast the device pulses I guess.
Do not use the battery system he used though, that is the weakest point of the model he built.
@@steemiepyle2608can you help me out for building live vechile tracking system, I will be grateful to you
@@steemiepyle2608then how can we overcome?
What kind of sim card are you using sir? 2g or 4g 5g?
Any one buy not jio
sir if we have an flutter based application where we have to retrieve lat and long from this tracking system, so what we have to do ?
Very Nice and Neat Project, with step-by-step guide. I want to ask, is it possible to track the device without pressing the push button?
Thank you.
Yes plz check more video i have all ready uploaded in our channel
Hi Sir, which software did you use for circuit design and PCB layout
I think Easy EDA
yes
@@JustDoElectronics Hi Sir, I used the first circuit and also the first code, the code is uploading but project does not function. Also Gps and sim800 Led does not blink. What maybe the problem?
@kinyanjuimartin7349 why send me photos in email
@@JustDoElectronicshow do i get your email
Can you put the vedeo on lacation tracking with RTK receivers
Ok
Can this project be used for 12-digit SIM cards?
Yes
Hello brother
I want to ask you that can we use an type c board instead of TP4056 1A LI-ION LITHIUM BATTERY CHARGING.
AND IF YES THEN LIKE HOW THE MICRO USB BOARD HAS THE NAME as TP4056 1A LI-ION LITHIUM BATTERY CHARGING.
Yes you buy to any online website
Want is the name of the type c board ?
@YashsahusPersonal same tp4056 in c type
Thank you so much brother
@YashsahusPersonal welcome bro 🤞
Can I use Arduino uno instead of nano?
Yes
sir does this project require led diplay stepsown
No
can we use aurdino uno instead of aurdino nano?
You need to check the pin features, but I think can...if there's no any special pin required which only arduino nano have.
Will it work from long distance wirelessly?
fow women safety
i dont think so bro
Yes is work
Can we use uno instead of nano , there is any change in its problem
Yes you used Arduino UNO board is not any changes
do we need sim ??
Yes
Why do we need sim ? I am new to Arduino plz guide ...how far can this device locate your mobile ...does it mean it is not necessary for me to have a mobile near me only the GPS tracker Arduino kit is required to set an alarm
Hi , I am interested in designing pcb board with gps, humidity, tilt, shock to mqtt server. can you help to desin board and software? thanks
Yes email me your requirements
Can i use stm 32 instand of Arduino nano
Yes but code will little bit different
Can we use GSM800A
yes
Umm hi broo can I borrow your idea and make something more unique like a button for clothes so in that way if someone kidnap someone they can try to find help by using your idea and btw it's for my science project/research
yes do it
can we also do this project with Arduino Uno?
Yes
How to make wire connections in case of wire crossings?
amazing video
how can i get the conponents online, do you have a link for that?
google it
Thankyou... superb ....
Welcome 😊
can I automate this without using the button , I want program this like every 5 min it will send me the google map location, is it possible?
Well if you want to you can just buy a gps tracker
Did anyone made this model using audino uno...if yes did u use lithium battery??
yup
Hii sir i made this project i checked the continuti the 5v pin nad ground pin are connected is that a problem ❤pls rely
Check is gsm module is working or not if the module is not work then you not received the message
does Sim800L Supports For 4G
Yes Airtel and vi only in India 🇮🇳
can i make it by using arduino uno
Yes
Desi Nice video 🏳️🌈🏳️🌈
Thanks 🙏
Can you send pcb design in jlcpcb
Yes
Hi bro I got your location and you are only 1 km away from me😂😂 can I come to your house I also what to do it .can you help me?
Mujhe yeh aaapse buy krna hai kitna me mil jaaaega
How would be navigation system!?
What is it's Range??
I don’t get it
@@JustDoElectronics will it send signal if the gps is about 10km away from the phone??
Sir its working in remote areas ? No network signal is available
No
I want to send these information to my app how could i do it
Sir which is the software used to install the code?
how expensive is that
device
like how much are the components
total around 600-700 INR
In coding u don't write any message like need help or anything but it sends u message how ?? Is it automatically or what ??
How to get call and sms at time using one push button.
Can i buy this circuit....?
Yes
How much it cost?
How much ot. Will cost to do irt
Hello sir... How to contact with you
Check video description
@@JustDoElectronics I want to buy correct diagram and code from you
How much range ?
How to buy it ASAP
What is its range
Unlimited
Sir can i add accelerometer in it?
Yes
Sir this devise all side aujesment teranning softwear what you calling this name ? Which web side downloading this softwear sir pl give me deatails pl .
Contact in what’s app
You very do a nice Job. How can I contact you in private please?
How much it cost
Nice I Like It
thanks
can you do it with seeduino xiao esp32c3?
yes
Bro is it applicable for only 2G SIM..also applicable for 4G
it depends which module you connect to ardiuno nano , 4G LTE module are little expensive and not efficient in terms of power.
I want this project how can i buy it??
yes
Can it show live location
Sir all circuit is ok and working good but massage not received on phone.
Can you tell how to connect the wires?
Check is sms pack available in sim card
Circuit diagram available in our website
The gsm neo is not blinking...what to do?
Bhai coding phone se karke Dekho please 😊😊😊😊😊😊❤❤❤❤❤❤
I saw the code, is the ports for neo and sim interchanged, you used 10,11 for sim, but you connected it to 8,9 pins, I'm confused here. Thank you for your reply
same here. any solution?
I want to contact you is there any way?
8830584864
Plzz send the proper full code for 1st gps project which have only calling and sms
Bro is your code working?
Yes bro 😎
@@JustDoElectronics in your given codes, which one should i use, the first one or the final code, or both?
Can someone send the complete names of the lists of components?
Is the code applicable when I'm using Sim800lv2 and Neo6mv2??
yes
sir all is ok but sms not received. pl help
Check sim card is sms pack available or not
Hello sir i want a personal consult from you
yes check website
battery life?
7 hours
4g support karega sim
yes
Resister value please
10000 =10k (k=1000 .: 10k= 10 x 1000)
Ty
I need to code ,please send code for me
Checking website code available
How to buy this project plz reply
what's app through
How Can i Buy ??? Where bro
@@JustDoElectronics How Can i Buy ??? Where bro
@@preethamreddy8412 8830584864
Where to buy a GPS NEO-6M module that actually works?
Yes
is that your answer??? @@JustDoElectronics
Prateek please can you send me the project and i will send you the cost of it, please, thanks
Hey master can you help me
Yes tell me how can i help you
@@JustDoElectronics i got esp 32 and sim600 and sim900 gprs module, can you help me with the code? or do I need an app? pleaaseeee
@@JustDoElectronics I ogt neo 6m module and esp32-wroom-32 and sim900 gprs shield module, what app to use for free and I was following you since the first vid, do you have code for this?
Range
Is work on gsm network (mobile network)
When the button is clicked nothing happened
Do proper connection
@@JustDoElectronics yes sir no response in serial monitor also
@ashwiniyashwanth6227 i think the code will not upload in your microcontroller
Sir can you please mail me the connection and code
Bhai no call and no message received in my phone 😢😢
Urgently chaahe
ok
I wanted to buy a product from you
ok
Hi sir why code state error
Did this code work?
code not uploading
Sir the project is not working properly
Why ??
bro u just doxxed ur self brother
pls be vegan animals also have lifes Radhe Radhe
code
thoda dam laga ke bolo