what a coincidence! I was at the junk yard a few days ago looking for wj parts admiring the war planes flying overhead! Ship that CJ5 up to the rust belt, you could get a fortune for it!
I have 2 pick-n-pulls in my area about the same distance I've also noticed they don't have many xj's anymore. I've shopped pick-n-pull for many years for xj parts I've been collecting interior parts and just everything xj for years I've had a ton of them and just recently I've started to buy more complete vehicles to have around for parts and stuff because the wrecking yard just isn't getting them and the prices are through the roof it used to be I'd only buy vehicles to build and i already have everything but now that i cant replenish my stash as much im looking to go about things a little differently. Everytime I fix up an xj I look for a nice body and I usually do mechanical and interior stuff I always like to fix up the interior nice. On our personal xj's or friends I like to add different options and stuff I have my preference of everything and mix and match limited model and Laredo or even base model stuff or renix era interior stuff, it's a lot of fun. There's some stuff that's seriously hard to find in usable shape nowadays for an xj. I usually stick to the 91-95 stuff especially recently because those are my favorite years to build. There used to be as many xj's as you see grand cherokees in the wrecking yard just aisles of them and I'm super picky on what condition my parts are in so recently I've only gotten hardware and little things
I almost did a similar ram air build on my Dak when I seen your previous vids on the current setup you've got, now I'm excited to see what you do this time. Thanks for the info on the app, I'll definitely check it out as I'm always looking for stuff for my Dak and possible mods. Those chips in the hood are an easy fix and a touch up oem paint pen and a good buff and polish it'll look like new.... of course after you dothe new ram system of course 🤣✌🤘😎🤘
Hey Martin, I'm located in Salt Lake and I drive a 2004 Laredo WJ. We have 3 large salvage yards here in the valley that are full of those WJs. The one I was at over the weekend has 18 in it. Come up here and grab some junk yard gold or hit me up and tell me what you need.
I just got my 2000 WJ back from the body shop after being hit by a flying pop up tent that flew off of a Toyota 4 runner last summer. It hit just about the middle of the drivers door about 2 inches down from the glass. It took out both doors and damaged the quarter panel. I was glad I was wearing glasses as they was glass everywhere in the jeep. It is the same color as the the wj you showed patriot blue. Sadly it needs a few more hours to finish the doors. But I needed it for work. Now I can get back to my 500 $ dakota. I will pull the heads and while waiting for them I will change the oil pump and pan. It dropped the the number 2 intake seat because the radiator cap went bad. It was kind of strange that it was almost hydro locked with gas in the number 2 cylinder. When I got it home I pulled the shroud and the fan. Then I used a ratchet and I could roll the engine over backwards non stop. But when rotating the direction it runs it would lock up. After I pulled the spark plug it freed up. So I got it started and I shocked it did not seem to have any blow by. It has 255.000 on the odometer. It will make a good farm pickup. It was nice when it was new being a quad cab laramie. Thank you for another nice video.
Hey Martin! I’m looking for a clean hood for my ‘02 Overland in Onyx Green if you ever come across one! Unfortunately we don’t have any Pick n Pulls nearby in the FL Panhandle.
I was wondering if you could find ho cams and everything to upgrade my 4.7l ? Hear wear I live can't find ho parts no wear. I would pay for parts and shipping.
Thank you...! The hood is easier & safer to remove it & install it while connected to its hinges, the hinges will keep it in their track-spots...!?🌙🕋💝🥰😘🔦🔬🔭🇲🇦🇵🇸☝
Used to be big into Ford's. Then I had a 97 Corvette, I really like that LS engine. Well, then I bought my first 98 Jeep Cherokee XJ and have been doing the Chrysler thing ever since. I like American vehicles.
@@brownwrench yes some of what they charge a core for is odd. I understand for alternators, starters, PS pumps, transmissions, and engines but for a hood or intake manifold, really.
...i have a 04 laredo i6 4x4 Wj that needs an engine, i'm willing to sell it for parts at a good price everything works except the blown engine, never driven off road and the title is in my name
Faulty A/C Pressure Sensor A/C Pressure Sensor harness is an open or shorted A/C Pressure Sensor electrical circuit with poor electrical connection. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Hey Martin , I have been a subscriber to your channel for the past couple of years and watch your often , and I admire the nice neat work that you do . You are very knowledgeable when it comes to things on the jeep WJ model . So I was wondering if maybe you could help me out with some information . My son in law has a 2001 WJ with the duel climate control electronic heating and AC system , and we are having trouble with it Shorting / Blowing out the Relay / Resistor Module under the dashboard on the passenger side under the glove box that controls the blower motor . What happens is the Model gets a Short in it and then the Heater/ AC controls on the dashboard won't turn off , and the Blower Motor won't stop Running , unless we remove the fuse for the blower from the fuse box from under the hood . The Relay / Resistor Module has been replaced twice so far and so has the plug / pigtail wires that go to it . Have you ever had , or have you ever seen this problem ? Each time we replaced it , it will work perfectly fine for several weeks before the problem happens again . If you know anything about these systems and possibly have any answers that may help please send me back a message ,. or heck if you have the time maybe even make a video or two on it , cause I am willing to bet that Jeep made a lot of these and someone else is probably seeking the same answers I am . Thank you for all your videos . Tim from Wisconsin .
Don't have much experience with climate control. I would inspect the wiring, and maybe replace the climate control. Could find a climate control at the salvage yard for around $25
I just love the southwest. My 1st car when I moved out here was a 69 Volkswagen without any rust whatsoever if I would have had that back in Iowa I would have had a flinstone car.
I know this doesn't pertain to this video,but I have an 04 jeep grand cherokee 4.7 ho.I just put a trans cooler on it.And even with that the engine temp still runs 210-220 and up.This scares me.I live in lake havasu where it gets hot af!Is there anything I can do to bring the temp down?
Yes the transmission cooler will help a lot to cool the transmission but unfortunately the hydraulic cooling fan is keeping the engine temperature up. That is the design of the hydraulic cooling fan the whole idea is awesome but they don't work like they're supposed to. I replaced mine with the electric fan from a 98 Jeep Grand Cherokee with a 5.9 Now the engine doesn't get above 200 ever.
Martin, do you know what year jeep 4.0L engine will swap into my '89 xj? I hope you can help! I also own a 2000 WJ that I now get 19mpg city, 24 mpg hiway because of your mods on the 4.7L!!!
I have a question about a 4.7 magnum engine, a friend of mine has a 2009 dodge with the 4.7 dual spark plug engine, we couldn't find a dual spark plug at our local wrecking yard, I did find a 2007 4.7 with the single spark plug 4.7, we pulled that 1, my question can we put his dual spark plug cylinder heads on that engine that came with the single spark plug, I know the knock sensors are in different places but I think I can work around that.
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Nice score Martin.Looking forward to seeing the new air intake...😁👍👍💪
Thank you Dan 😊
what a coincidence! I was at the junk yard a few days ago looking for wj parts admiring the war planes flying overhead! Ship that CJ5 up to the rust belt, you could get a fortune for it!
And that cab and front click from the 65 Ford truck would bring a pretty penny.
I have 2 pick-n-pulls in my area about the same distance I've also noticed they don't have many xj's anymore. I've shopped pick-n-pull for many years for xj parts I've been collecting interior parts and just everything xj for years I've had a ton of them and just recently I've started to buy more complete vehicles to have around for parts and stuff because the wrecking yard just isn't getting them and the prices are through the roof it used to be I'd only buy vehicles to build and i already have everything but now that i cant replenish my stash as much im looking to go about things a little differently. Everytime I fix up an xj I look for a nice body and I usually do mechanical and interior stuff I always like to fix up the interior nice. On our personal xj's or friends I like to add different options and stuff I have my preference of everything and mix and match limited model and Laredo or even base model stuff or renix era interior stuff, it's a lot of fun. There's some stuff that's seriously hard to find in usable shape nowadays for an xj. I usually stick to the 91-95 stuff especially recently because those are my favorite years to build. There used to be as many xj's as you see grand cherokees in the wrecking yard just aisles of them and I'm super picky on what condition my parts are in so recently I've only gotten hardware and little things
Glad to see people are actually fixing things from salvage yards. May be even more of it going on if things keep going the way they are.
I almost did a similar ram air build on my Dak when I seen your previous vids on the current setup you've got, now I'm excited to see what you do this time. Thanks for the info on the app, I'll definitely check it out as I'm always looking for stuff for my Dak and possible mods. Those chips in the hood are an easy fix and a touch up oem paint pen and a good buff and polish it'll look like new.... of course after you dothe new ram system of course 🤣✌🤘😎🤘
Yeah the new Ram Air is gonna look pretty cool, it will be made from aluminum and a conical shaped filter.
the vehicles at your pick-a-part are in better shape than the stuff we drive in upstate N.Y.
I was looking for this Chrysler sheet site, thanks!
Chrysler Build Sheet fcacommunity.force.com/RAM/s/equipment-listing
Hey Martin, I'm located in Salt Lake and I drive a 2004 Laredo WJ. We have 3 large salvage yards here in the valley that are full of those WJs. The one I was at over the weekend has 18 in it. Come up here and grab some junk yard gold or hit me up and tell me what you need.
Still love my 04 overland!! Daily driven since 05! Great suv
I just got my 2000 WJ back from the body shop after being hit by a flying pop up tent that flew off of a Toyota 4 runner last summer. It hit just about the middle of the drivers door about 2 inches down from the glass. It took out both doors and damaged the quarter panel. I was glad I was wearing glasses as they was glass everywhere in the jeep. It is the same color as the the wj you showed patriot blue. Sadly it needs a few more hours to finish the doors. But I needed it for work. Now I can get back to my 500 $ dakota. I will pull the heads and while waiting for them I will change the oil pump and pan. It dropped the the number 2 intake seat because the radiator cap went bad. It was kind of strange that it was almost hydro locked with gas in the number 2 cylinder. When I got it home I pulled the shroud and the fan. Then I used a ratchet and I could roll the engine over backwards non stop. But when rotating the direction it runs it would lock up. After I pulled the spark plug it freed up. So I got it started and I shocked it did not seem to have any blow by. It has 255.000 on the odometer. It will make a good farm pickup. It was nice when it was new being a quad cab laramie. Thank you for another nice video.
Too bad Mr. Toyota didn't have his tent bolt it down properly.
Good luck with the repairs. Thank you for watching.
Hey Martin! I’m looking for a clean hood for my ‘02 Overland in Onyx Green if you ever come across one!
Unfortunately we don’t have any Pick n Pulls nearby in the FL Panhandle.
I need the steering wheel !!
I'm still interested if this hood works bud
QUICK QUESTION WHAT KIND OF MANUAL BOOK DO U HAVE MARTIN?
I was wondering if you could find ho cams and everything to upgrade my 4.7l ? Hear wear I live can't find ho parts no wear. I would pay for parts and shipping.
Martin im having problems with a 4.7. Dakota bogs and dies when coming to a stop , after wont start up again
Could be a lot of different things, clogged cats, bad IAC, dirty throttle body, etc. Start with that.
Thank you...!
The hood is easier & safer to remove it & install it while connected to its hinges, the hinges will keep it in their track-spots...!?🌙🕋💝🥰😘🔦🔬🔭🇲🇦🇵🇸☝
hey whats up man, well I was watching you videos and I was wondering by any chance, do you work on chevys aswell? or just Dodge?
Used to be big into Ford's. Then I had a 97 Corvette, I really like that LS engine. Well, then I bought my first 98 Jeep Cherokee XJ and have been doing the Chrysler thing ever since.
I like American vehicles.
Hi Martin,
What are the corresponding part numbers that identify it as the 5 speed TCM?
Here is part number 56044574AC for the 545RFE TCM
Here is part number 56044574AC for the 545RFE TCM
Thanks Martin,
I'm away from the WJ but will check once I am back in the state.
Keep up the good work.
Really looking forward to the up coming build😁
Thanks again Martin, I had pulled two TCMs and didn't label which one came off the HO.
Now installed and hoping for a change in fuel consumption.
I can't believe someone junked that 65 ford.
I see vehicles like that all the time that pic-a-part.
Need drivers fender lol
I live about an hour away from you I need some advice can you reach out
Sure what's up?
You can also reach me on Facebook Messenger there is a link in the description of the video.
How much for an 08 intake and cams out there?
Intake manifolds are $55 each plus a $5 court and Cam shafts are $22 each plus a $2 core.
@@martinbuilt core? Wow, that's odd (to me)
@@brownwrench yes some of what they charge a core for is odd. I understand for alternators, starters, PS pumps, transmissions, and engines but for a hood or intake manifold, really.
...i have a 04 laredo i6 4x4 Wj that needs an engine, i'm willing to sell it for parts at a good price
everything works except the blown engine, never driven off road and the title is in my name
Hey Martin I'm getting code p1598 on my 4.7 04 Overland
Faulty A/C Pressure Sensor A/C Pressure Sensor harness is an open or shorted A/C Pressure Sensor electrical circuit with poor electrical connection.
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Maybe upgrade the WJ with an electric engine ?
Looking forward to seeing what your next ram air build will be. Last year I built the same ram air you did, but with a few minor differences.
It will be made from aluminum. I have it designed, I just need to practice more on my TIG welding.
going on 2 years looking for a decent xj up here in Pennsylvania. still refuse to pay 4-5k for one with over 200k miles and rotted out floors 😮💨
I wish you had a forum to ask questions and get answers. Any threads you can share so I can ask some questions about my 2001 grand Cherokee limited?
It has happened to me to your channel been watching for l g time but fixed now
But they didn't take the back seats?
Hey Martin , I have been a subscriber to your channel for the past couple of years and watch your often , and I admire the nice neat work that you do . You are very knowledgeable when it comes to things on the jeep WJ model .
So I was wondering if maybe you could help me out with some information .
My son in law has a 2001 WJ with the duel climate control electronic heating and AC system , and we are having trouble with it Shorting / Blowing out the Relay / Resistor Module under the dashboard on the passenger side under the glove box that controls the blower motor .
What happens is the Model gets a Short in it and then the Heater/ AC controls on the dashboard won't turn off , and the Blower Motor won't stop Running , unless we remove the fuse for the blower from the fuse box from under the hood .
The Relay / Resistor Module has been replaced twice so far and so has the plug / pigtail wires that go to it .
Have you ever had , or have you ever seen this problem ?
Each time we replaced it , it will work perfectly fine for several weeks before the problem happens again .
If you know anything about these systems and possibly have any answers that may help please send me back a message ,. or heck if you have the time maybe even make a video or two on it , cause I am willing to bet that Jeep made a lot of these and someone else is probably seeking the same answers I am .
Thank you for all your videos .
Tim from Wisconsin .
Don't have much experience with climate control. I would inspect the wiring, and maybe replace the climate control. Could find a climate control at the salvage yard for around $25
I have never seen the floor intact on an old 65.
I just love the southwest.
My 1st car when I moved out here was a 69 Volkswagen without any rust whatsoever if I would have had that back in Iowa I would have had a flinstone car.
I know this doesn't pertain to this video,but I have an 04 jeep grand cherokee 4.7 ho.I just put a trans cooler on it.And even with that the engine temp still runs 210-220 and up.This scares me.I live in lake havasu where it gets hot af!Is there anything I can do to bring the temp down?
Yes the transmission cooler will help a lot to cool the transmission but unfortunately the hydraulic cooling fan is keeping the engine temperature up. That is the design of the hydraulic cooling fan the whole idea is awesome but they don't work like they're supposed to. I replaced mine with the electric fan from a 98 Jeep Grand Cherokee with a 5.9
Now the engine doesn't get above 200 ever.
Here is that video.
How to convert a hydraulic cooing fan to electric.
ua-cam.com/video/J02nYci5DS0/v-deo.html
Hey Martin, did the 4 liter in the white xj look good enough to take out?
I'm building a'89 xj, I need a motor!!!
Yeah I was thinking that it was probably a good engine.
Martin, do you know what year jeep 4.0L engine will swap into my '89 xj? I hope you can help!
I also own a 2000 WJ that I now get 19mpg city, 24 mpg hiway because of your mods on the 4.7L!!!
I have a question about a 4.7 magnum engine, a friend of mine has a 2009 dodge with the 4.7 dual spark plug engine, we couldn't find a dual spark plug at our local wrecking yard, I did find a 2007 4.7 with the single spark plug 4.7, we pulled that 1, my question can we put his dual spark plug cylinder heads on that engine that came with the single spark plug, I know the knock sensors are in different places but I think I can work around that.
Yes you can do that you are gonna lose compression. You're gonna go from 9.8 to 8.74 approximate. That could be as much as 50 horsepower.
@@martinbuilt can we deck the head even though it is a over head cam design
@@martinbuilt it will get him up and running
@@martinbuilt and thank you for your response
@@martinbuilt or would it be better to just run the single spark plug heads and get coils fir the single plugs and do away with the dual plug setup