Thats good to see you got them headers put on it sounds like a beast! I have a Borla Atak exhaust & Kooks long tube headers on my Challenger Scat Pack too & them cold starts scare the shit out unsuspecting people!!!😅🤣
@joelespinoza5220 yes glad to help. Also check your local area for tuners who can unlock yours. Makes it easier instead of buying, shipping and replacing your current PCM. Plus my local tuners mostly use HP tune so I'm having a harder time finding someone who can Diablo tune, might just have to go to the email tune.
Thank you!!!!🔥 we go to Starwood motors in like farmers branch. We loved it there! You have to check out their show room and Tanner did our tune with hp tunes!!
We haven't found a place to dyno because everyone is crying about liability, but it's easily over 500HP to the crank and the Torque/HP curve is a alot smoother. I believe they add around 15+ HP
Great work on all the different video shots from the Charger following the 1320
thank you so much! we've been trying to get better!
Your quad tips are sticking out 2 far out fix the tips
This is how we wanted our challenger build, kind of more classic
lol
Their a bit small to be sticking out that far
DEFINITELY not classic. Take it back and have them cut 2” off of them.
Sounds awesome tips out to far. Trak hawk tips would look great on it.
Thank you! We wanted a more classic muscle type of look but ill look into those, these tips were just what my local shop had!
Be careful backing up!
Sounds nice!!! I love my long tubes ! I also did heads, cam and converter!! Runs great ! 11.2 @ 121 in 1700 da
Damn that sounds like a great run and you got a beast on your hands 🫢 what kinda cam did you end up going with? I've been contemplating a few
Quick question did you get any codes after the install?
Thats good to see you got them headers put on it sounds like a beast! I have a Borla Atak exhaust & Kooks long tube headers on my Challenger Scat Pack too & them cold starts scare the shit out unsuspecting people!!!😅🤣
Thank you! It really gave it a lot deeper tone and the Borla ATAK is the one wete wanting! 🤣🤣 she scared me one so I can't imagine with that system 🙉😅
Did you do a PCM tune?
@@garybishop4030 Yes indeed-deed
We got the PCM unlocked and got an HP tune. We had a Diablo but switch bc the place that did the headers only does HP
@@hisherhemi OK then go to another place that's gonna take care of it all, I also did a Diablo tuned & it worked out well! Good luck on that!
Sounds great!
Thank you! The 2" headers should allow for plenty of air to flow with the next mods!
@His&Her Hemi I just bought a nitrous kit for my 1320 challenger and headers are next! I can't wait to see some more content!
@southernindianaairgunner2156 that's exciting to hear, congratulations! Any plans to forge the pistons or are you keeping it stock?
Do you have to get it tune once you do this mod
I'm adding the same LT headers this week. Has it been dyno'd?
You're not gonna regret it! And no, we didn't tune it out aggressive so it'll be a slight gain for us
Great review !
Thank you. We'll, be doing a more in depth soon now that we've been able to drive it a bit!
Definitely looking forward to it 📈
You should give Tapped Performance out in McKinney a call. Mopar is all they do
Ooo that's what I was looking for but it was hard to find! I'll be looking into them, thank you for that 🙏🏽
Did the check engine light came on and if it did how you got to turn it back off ?
It would have but the shop we took it to also did tuning through HP Tuners so we got it back with no lights.
Exhaust tips are sticking out to far.
no one is talking about that bad rattling sound did you get that fixed?
It's the active exhaust valves being left open but nah. It's hard to hear once you go more than 5mph
was gonna ask if you tuned her or not. then you will see a difference
Yes originally we had a diablo tune then we did HPtune after the headers. Not a big difference tuning wise but the headers opened her up
Awesome video! How much hp gains did you get after a tune?
Thank you! We never tuned it because our gains would be minimal since we didn't do an aggressive tune
What mid pipe did u use? and do I need more than 2 o2 sensors?
We did the Stainless Works HI flow cats and it stinks alot. I couldn't imagine with no cats 🫢 and o2 sensors came with the LTH kit
yo what kind of exhaust do u have other then the headers ? is it stock ?
Yessir just headers for now, we're looking into upgrading that as well soon🔥
Did you have to tune your car right away ? I want to get headers for my car but I’m lost
I'd just suggest getting them done as soon as possible. It might be okay for a few hundred miles but fr do it asap tbh
@@hisherhemi I truthfully do appreciate it! Well, looks like I’ll be needing to purchase an unlocked PCM!
@joelespinoza5220 yes glad to help. Also check your local area for tuners who can unlock yours. Makes it easier instead of buying, shipping and replacing your current PCM. Plus my local tuners mostly use HP tune so I'm having a harder time finding someone who can Diablo tune, might just have to go to the email tune.
You’ll need to retune the car will throw a code
🔥🔥🔥🔥
Sound way meaner now 🔥👏
Yes fr! Thank you!!
Just going by that rear wheel someone really likes riding the curbs... lol
Good thing these are just the stock beater rims and how does your scatpack wheels look?
@@hisherhemi all my wheels are straight but I am more particular about things than the average person.
@metalbeast83 my daily Charger wheels are fine and I do wanna get it figured out but it's definitely not first on list. Headers were more important
throw some mudflaps on the rear. already saving tons of time not having to get rubber off the bumper.
True weve thought about it but also it increases drag too so idkkk. We do need to put some tape on it next time though!
Dope vid!! What tuner shop you going to? Im also in the dfw area and need to find a turner shop haha
Thank you!!!!🔥 we go to Starwood motors in like farmers branch. We loved it there! You have to check out their show room and Tanner did our tune with hp tunes!!
Such a big difference. Sounds soo much better. You need to do the same to your girfriends charger. Im sure she would like it.. LOL
Right?! Its so much deeper and more open! Maybe one day, first we're gonna put the old 6.4 headers on the r/t and see whats up with that🔥
So you recommend stainless over kooks???
Is that a rattle I hear?
What kind of HP gains did you get from it?
We haven't found a place to dyno because everyone is crying about liability, but it's easily over 500HP to the crank and the Torque/HP curve is a alot smoother. I believe they add around 15+ HP
@@hisherhemi awesome thank you.
I should invite you over to watch me clean my car that wouldnt have anything to do with headers either. Lucy you got some splaining to do
What are you even saying? 🤦🏽♂️😂
Wait till you cam it lol
Can't wait to do that but it's about the journey! Cam will probably be one of the last things we do
Took them 2 days? Lol
Those tips are way to far out!