Super buraz! Svaka čast! Svidja mi se sto radis sa "obicnim" alatima, a ne neko cim dodje do 100k, odmah Festool, Milwaukee, Ryobi i ostalo. Kad neko zna posao moze i alat iz Lidl-a. 👍👍👍 Veliki pozdrav drug
Hello This is a gread work with your Low-budget tools its nice to see its not the tools its the men behind the tools to make good work. Best whises for more projekts. 👍
I love the plastic box idea as drawers. I have one question 1 why the carpet, would it not be harder to clean and would absorb greases etc. Fun project looks great
I agree, a very nicely planned and executed job, but carpet made no sense to me as a bench-top surface. I found hardboard sheet (mason board in USA?) was a good, hard-wearing and ultimately sacrificial top over (in my case) plywood. I varnished mine with polyurethane and it’s still going strong several years later despite being the spot for soldering, using a miniature lathe, measuring and gauging metal and wood, hammering and punching, etc. But, as I say, a really nice job, thank you. Les in UK
@@leslieaustin151 I did the same but slightly difference. Used 1 layers 3/4 ply wood then a 3/4 layer of mdf as a sacrifice. Makes it super thick so I can use bench dogs and don’t mind if I sacrifice the too just swap it out every couple of years
Fabulosa idea, has tenido un acierto en el uso de los cajones de plástico, son duros y consistentes, seguro que te lo copió, para un garaje pequeño o en nuestro rincón, se puede guardar y organizar.
Increible trabajo. Impresionantes herramientas para realizar cualquier cosa. Mas su creatividad y buen manejo de cada herramienta. Ojala tuviera todas. Serua de gran utilidad. Pero muy costosas. Desde Argentina, graciss por enselar y mostrar ese gran trabajo.😊
Tolko si je dobro napravio da neces da izadjes iz nje ni kod frizera da odes nego mora on da dodje da te sisa unutra 😂😂😂 salim se extra kao i uvek, samo neznam koji je ono materijal sto si stavljao na stolove mislim da ce ti biti prilicno zajeban za odrzavanje. Pozdrav
Сделано красиво и мастерски, я только не понял зачем столешница была покрыта ковром? Там будет скапливаться вся пыль и жидкость пролитая на стол в процессе работы!
You are an excellent master craftsman, I’m trying to figure how I could incorporate some version of this in a tiny house for storage, if I can find some version of the plastic crates here in the United States. I also may have to use 80/20 aluminum to build the frame for the plastic bins. Excellent idea and construction.
He should have shown what the rest of us would have done at 16:51. Drill JUST out of reach, stretched too far, slipped, dropped the shelf, fell of the cabinet and spend the next 10 minutes swearing!!
It is always good to see someone create something, but I will say that unless you have the plastic crates and metal tubing laying around and no electric bill I can see this project costing 750-1000 euro? Do you have a price breakdown?
Günstig ? Allein die Auszüge, haben einen mehr als sportlichen Preis und versuche mal günstige aber stabile Kunststoffboxen zubekommen. Aber sonst eine tolle Arbeit.
Todos tenemos en casa una cortadora laser!! Fácil, barato y para toda la familia!! Te tenías que haber hecho la plantilla a mano que tampoco cuesta tanto...
Какой странный лобзик без подошвы. О непонятен выбор материала для покрытия рабочей поверхности. И герметик на уголках верхней полки. Нопри этом аккуратно 👍
Nije loša ideja, baš tako nesta i meni treba. Gdje si nabavio te plastične sanduke i koliko su te koštale ove vodilice? Te su malo bolje nego one sa plastičnim točkićima.
Looks really clean. Though don't know why you cut corners on painting the boxes. You also did the front and back of the frame and everything. But that's me. I would've finished those too. Great job otherwise!
Remember to click LIKE and SUBSCRIBE to the channel, it helps a lot. THANK YOU. 🤗
Gde si nabavio plastične kutije po toj ceni?
Klasse gebastelt. Danke für das Teilen deiner tollen Ideen. LG Christoph 👍 👍 👍 👍 👍 😊
Well done, it turned out no worse than expensive factory options. It looks great.
Good work 👍❤️
MM77 Approved 👍🏼👍🏼……………………………………………….AWESOME idea for using the plastic boxes as drawers! You created a ton of usable space. 👍🏼👍🏼
И идея хороша, и исполнение.
Особенно порадовала правильная высота рабочей поверхности стола - на ладонь ниже пупа.
Молодец.
Super buraz! Svaka čast!
Svidja mi se sto radis sa "obicnim" alatima, a ne neko cim dodje do 100k, odmah Festool, Milwaukee, Ryobi i ostalo. Kad neko zna posao moze i alat iz Lidl-a. 👍👍👍
Veliki pozdrav drug
Brilliant work young man👍
Bravo !
Un conseil pour récupérer des caisses en plastique?
Merci. Bonne continuation.
Браво Пешо.👍👍👍
Hey mec, ta video est terrible, et ce que tu as réalisé.....j'en suis jaloux !
Sve pohvale🏅👍👍👍
Cool idea and great implementation, perfect for small garages, I'd love to see more videos like this, Greetings from Germany
Fantastic build. You are an excellent craftsman!
Tnx👨🏭
Espectacular trabajo! felicidades!!! por cierto menudo crack con la caladora eh, ni con una tronchadora o mesa de corte dejo los cortes tan limpios!
Hello
This is a gread work with your Low-budget tools its nice to see its not the tools its the men behind the tools to make good work.
Best whises for more projekts. 👍
繼續加油!fighting!😉😉😉🎉
Nice workshop
I love the plastic box idea as drawers. I have one question 1 why the carpet, would it not be harder to clean and would absorb greases etc. Fun project looks great
I agree, a very nicely planned and executed job, but carpet made no sense to me as a bench-top surface. I found hardboard sheet (mason board in USA?) was a good, hard-wearing and ultimately sacrificial top over (in my case) plywood. I varnished mine with polyurethane and it’s still going strong several years later despite being the spot for soldering, using a miniature lathe, measuring and gauging metal and wood, hammering and punching, etc. But, as I say, a really nice job, thank you. Les in UK
@@leslieaustin151 I did the same but slightly difference. Used 1 layers 3/4 ply wood then a 3/4 layer of mdf as a sacrifice. Makes it super thick so I can use bench dogs and don’t mind if I sacrifice the too just swap it out every couple of years
@@leslieaustin151 He chose carpet, it's a specific workshop. for clean work without oil and dust
Nice high quality work. Great attention to detail.
Slainte,
DC🍀
Tnx 🧑🏭
Nice ! Make some worklights in the top shelf!!
Fabulosa idea, has tenido un acierto en el uso de los cajones de plástico, son duros y consistentes, seguro que te lo copió, para un garaje pequeño o en nuestro rincón, se puede guardar y organizar.
Really impressive to put down so much work to have your own at-home barber shop 😊
Ficou muito bom e prático. Parabéns pelo serviço bem feito.
Great idea! Excellent craftsmanship!
Tnx👨🔧
Zaje-fajnie to wyszło, pozdrawiam i dzieki za kolejny filmik
😮 Ne ne čudim se ,to je tvoj rejting.👏💯👍
bravo tres bonne idée 🤩
Pero svaka čast...dobra ideja za moju garazu..
I've just find out your channel and I'm loving your videos.
I subscribed.
Thank you and greetings from Portugal.
hola el video está Genial muy bueno:
🤜🤛👍👊💪👌
Respekt👍👍
Finally a UA-cam person that can Fab and Weld properly lol.
Bella idea
😊👌
Bravo
Amazing, you are so Brillant
Increible trabajo. Impresionantes herramientas para realizar cualquier cosa. Mas su creatividad y buen manejo de cada herramienta. Ojala tuviera todas. Serua de gran utilidad. Pero muy costosas. Desde Argentina, graciss por enselar y mostrar ese gran trabajo.😊
Super cool 🙂
Tolko si je dobro napravio da neces da izadjes iz nje ni kod frizera da odes nego mora on da dodje da te sisa unutra 😂😂😂 salim se extra kao i uvek, samo neznam koji je ono materijal sto si stavljao na stolove mislim da ce ti biti prilicno zajeban za odrzavanje. Pozdrav
Excellent video, gave me some ideas for a plastic beer crate mobile rack I intend to build, why felt for the surface of the desk though?
He is highly skilled in manipulating small tools with precision and finesse.
Congratulations, you are truly a good craftsman.
But I would really like to know where you bought those $2 cassettes!!! 😀
Мне очень понравилось!!! Только я бы сделал светлее!!!!
This is fire
Mega 👍🏻👍🏻👍🏻
❤ класно
where can we find this type of boxes?
Just like Doctor DS 👍🏻
Boa ideia , gostei. Deus abencoe. Moises. Campo Limpo Pta S.P.
great job
Brilliant idea! What kind of plastic crates are these? Where are they from?
Встаёт вопрос,а где же взять столько ящиков и труб,ведь они не каждому по карману
More videos from your workshop!!
Regards from Spain! 👏🏼👏🏼
Awesome!! 🎉
2:21 2:22
Свака част мајсторе!
Ја направи бонбона
Сделано красиво и мастерски, я только не понял зачем столешница была покрыта ковром? Там будет скапливаться вся пыль и жидкость пролитая на стол в процессе работы!
Parabéns muito bom mesmo este ideia
Hi, what size steel do you use?
You are an excellent master craftsman, I’m trying to figure how I could incorporate some version of this in a tiny house for storage, if I can find some version of the plastic crates here in the United States. I also may have to use 80/20 aluminum to build the frame for the plastic bins. Excellent idea and construction.
He should have shown what the rest of us would have done at 16:51. Drill JUST out of reach, stretched too far, slipped, dropped the shelf, fell of the cabinet and spend the next 10 minutes swearing!!
which model of STAHLWERK machine you used ? results looks perfect.
excelente trabajo!!
el laser ese de donde compraste.. esta muy bueno tambien..
Gde si kupio ove plastične kutije ?
Jakiej spawarki używasz?
Really cool idea!
Where's the lasercutter from?
Very nice
how do you pain the plastic storage bin ? Special Paint ? Special prep? PLastic is kinda nautorious for paint not sticking to it. thanks.
J'ai apprécié ton travail .cool !!!!.je te donne un nom : le solitaire ça marche??
Nice
Me gutaria saber cuales son los guantes que usa, parecen comodos,
Is his to shelf upside down?😊
💪💪💪👍👍
Me gustó la idea.... Buen trabajo!!! 😉👌
Zajefajne, możesz powiedzieć gdzie dostałeś takie skrzynki i jaki mają wymiar?
pozdr
Perfektní video a práce jako vždy
Vypadá to náramně pěkně
Klobouk dolů
Pozdrav z Čech
Ať se daří :-)
Svaka cast pero 🫡🫡🫡
Which laser did you use? Can you share a link? Thank you
Gde si pazario gajbice? Koja cena?
It is always good to see someone create something, but I will say that unless you have the plastic crates and metal tubing laying around and no electric bill I can see this project costing 750-1000 euro? Do you have a price breakdown?
skąd kupowałeś skrzynki ?
Bạn nên để kích thước chi tiết của Kệ để mọi người biết thông tin❤❤❤
Ящики для инструмента чтобы делать ящики для инструмента )))
Don't know if I have the patient to paint all the crate man... Nice setup
Günstig ? Allein die Auszüge, haben einen mehr als sportlichen Preis und versuche mal günstige aber stabile Kunststoffboxen zubekommen. Aber sonst eine tolle Arbeit.
Jakiego jesteś pochodzenia? :D pozdrawiam
19:10 best part !
Todos tenemos en casa una cortadora laser!! Fácil, barato y para toda la familia!! Te tenías que haber hecho la plantilla a mano que tampoco cuesta tanto...
Какой странный лобзик без подошвы. О непонятен выбор материала для покрытия рабочей поверхности. И герметик на уголках верхней полки.
Нопри этом аккуратно 👍
Ciao, dove si possono procurare queste cassette in plastica?
Svaka čast majstore
👍
P.S. nešto mi govori da ćeš nabaviti 3D printer.
What are the size and colours
total costs?
400$
Trabalho profissional!
👍👍👍👏
How much did all this cost you?
I don’t think this word “cheap” mean’s what you think it does. Great build.
👍👍👍👍
Welding metal construction $400, Drawer slider mounts $500 aaaaand cheap plastic crates 😵💫
Nije loša ideja, baš tako nesta i meni treba. Gdje si nabavio te plastične sanduke i koliko su te koštale ove vodilice? Te su malo bolje nego one sa plastičnim točkićima.
Looks really clean. Though don't know why you cut corners on painting the boxes. You also did the front and back of the frame and everything. But that's me. I would've finished those too.
Great job otherwise!
me too... I'm obsessed with the fact that he didn't paint the whole box... only the visible parts.
Очень интересно и ничего не понятно. Для каких целей столешница оббита напольным покрытием?
Померил уклон уровнем, а диагональ забыл🌚