Volkswagen Passat 1.8 Turbo Low Oil Pressure Create Access Plate

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 225

  • @docimastic
    @docimastic 2 роки тому +4

    A brilliant idea... THANK YOU!! Also, GREAT documentation and absolutely the BEST editing, and I love that you included a detailed "list" (with pictures, no less!) of the tools and materials that you used. Thanks again, David

    • @DoItWithDave
      @DoItWithDave  2 роки тому +1

      One quick note. Someone commented you may be able to remove front motor mount and slightly jack up front of engine to get access to rear bolts. Haven't tried however if this is true probably best to do it, as you would on just about any other vehicle that allows full access to all oil pan bolts.

  • @MrLo3o
    @MrLo3o 3 роки тому +5

    awesome video of how you shouldn't do a job. And the best thing is the amount of positive comments that the video has .... the work that this person has done is terribly a very bad way of how you should not repair an oil pump blockage.
    Do you know why the oil pan doesn't have an access port on the bottom? to avoid that due to a simple failure of a gasket, several liters of oil do not spill on the road and because of that people die due to an accident due to oil on the asphalt
    That is why I am impressed by all the people who like this video and comment positively. you can tell there is very little common sense. And for those who want to answer me with some stupidity, I only say that I have been a car mechanic for 25 years and I have never seen stupidity like this and even less of people praising it

  • @troxxanparagon7168
    @troxxanparagon7168 2 роки тому +1

    i gonna do that to my old 00 1.8t shes dropping oilpressure when warm and sounds like yours. i love your teoretical approch. sounds like my old teacher

  • @mrbeefhbw
    @mrbeefhbw 6 років тому +56

    Congratulations. You've traded a bad pickup tube for an engine full of metal shavings.

    • @caesarpula612
      @caesarpula612 5 років тому +4

      Just drop the sump.... wtf...

    • @Alonsel3
      @Alonsel3 5 років тому +1

      @@caesarpula612 Dropping the sump is quite difficult on this model.

    • @Alonsel3
      @Alonsel3 5 років тому

      @@DoItWithDave I see what you did and why, but the above poster is pretty spot on. Maybe somehow leaving in the oil, and using your mini hacksaw as much as possible, using the messy oil to pull away the shavings out of the engine as it dripped through, would have been a nightmare but maybe saves your engine long term. Any problems you've encountered so far?

    • @diabloein
      @diabloein 5 років тому +1

      I disagree. Oil pans have magnets in them that will attract any metal shavings. Also filling the emgine then draining it and refilling will wash any thing that might be there out or to the magnets cleaning it up.

    • @Alonsel3
      @Alonsel3 5 років тому

      diabloein thousands of micro shavings will not all be picked up by a sump magnet. Maybe the risk is low?

  • @gottfriedstutz8728
    @gottfriedstutz8728 5 років тому +1

    You made my day. Done this work today at my daughters 1.6 Passat. Saved a lot of money at the stealer.

  • @castertroy9129
    @castertroy9129 5 років тому +9

    Very creative. Give you credit for thinking outside the box

  • @pdaniel8
    @pdaniel8 5 років тому +14

    @13:35, that oil pick up is gonna be clogged again in no time.

    • @travisdonley8768
      @travisdonley8768 Рік тому +1

      I was thinking that could be a possibility. Would love to know if he checked the pickup screen again since, and what he found.

  • @JRB.SR1
    @JRB.SR1 4 роки тому +14

    Huh, really! Now you will have metal filings from the grinding, drilling and taping of the plate running through your motor, then all the extra gasket maker when it degrades will plug that pick up solid! For people who view this video, DO NOT DO THIS! Guaranteed way to destroy your motor.

    • @BenState
      @BenState 2 роки тому

      Yeah, its not that hard to drop the subframe.

  • @ritvars9276
    @ritvars9276 4 роки тому +16

    Wouldn't it be easyer just to remove the oil pan, remove all the parts (without unscrewing screws thru the cutted out buthole in oil pan), and put it all together? I mean, you spend more time creating cover, letting to dry sealer, and we are not even talking about metal filings in engine after cutout and drilling....

    • @nastyn8te328
      @nastyn8te328 3 роки тому +1

      A single mother with three kids is going to try to buy a used car already struggling in life and then she ends up buying someone's Frankenstein monster and gets stranded in the middle of nowhere and stuck with a junk car and a humongous tow bill along with the mechanic who's going to give her the bad news.

    • @bigsteppa298
      @bigsteppa298 3 роки тому +3

      Hello, you probably don't even remember making this comment but I might as well answer the question for everyone wondering. The Audi's and VW's of this generation with the 1.8t's were built in such way that the whole subframe had to be dropped just to remove the oil pan. Checking and cleaning oil sludge in the oil pan is a huge hassle with these cars. Making an access port on the bottom of the pan isn't such a bad idea.

    • @GeorgeMasonOliver
      @GeorgeMasonOliver 2 роки тому

      Like the other guy stated the the subframe is in the way so the easiest way to remove the oil pan is to pull the whole engine

    • @stephenhurst9257
      @stephenhurst9257 2 роки тому

      Great idea I did the golf gti easy remove sump however nothing in way but screen was Full of plastic and metal rings!!! Yes Actually -from severely smashed dipstick tube a rite dope had done rammed and rammed at .But that cut method on that motor is the best 👌

    • @Gg-ix7ek
      @Gg-ix7ek 3 місяці тому

      Just get a new oil pump replacement

  • @joeandrejczyk2499
    @joeandrejczyk2499 4 роки тому +3

    This is brilliant! Looking at doing this on my Passat. VW makes the oil pan removal so onerous, even if you have all the tools and shop equipment. It's just not worth doing it on an older car, the repair would cost more than the car is worth. Best part is you can perform periodic inspections of the pickup tube easily. Someone should make an after market kit for this.

    • @DoItWithDave
      @DoItWithDave  4 роки тому +2

      Thank you for your comment. Everything you stated are my thoughts exactly. It would be nice to have an aftermarket pan that you could access the pick up for regular service.

    • @TheRainFlux
      @TheRainFlux 4 роки тому

      I agree with you completely on this!!!

  • @robbmacdonald9164
    @robbmacdonald9164 2 роки тому +1

    I have the alarm for low oil pressure on my 2004 Passat 1.8T. I had the sensor replaced so now it goes off sooner, LOL. After you completed this clean out, did the alarm stop going of AND more importantly did that top end noise stop?

    • @DoItWithDave
      @DoItWithDave  2 роки тому +2

      Didn't have an issue with low oil pressure after this. The top end noise wasn't present however some of the debris that got clogged the filter were definitely pieces of the chain guides that had deteriorated. I'm not recommending anyone does this I just wanted to share my last ditch effort on this VW. Thanks for watching!

  • @sunelven
    @sunelven 3 роки тому +2

    It's awesome when ppl solve problems and make them working.

  • @miyakekyo9238
    @miyakekyo9238 6 років тому +4

    My car, this situation is not the first time, the mileage has changed over 150,000 kilometers, and the oil pump has been replaced. Then the mileage is 250,000 kilometers and the oil pressure is too low. I think of the owner of the repair shop. I told you that this has to be changed every 100,000 kilometers. I didn't believe that the oil pump was so easy to fail at first, but today I believe that this problem is very troublesome. If it is not handled, it will cause engine damage.

  • @diabloein
    @diabloein 5 років тому +2

    Kind of reminds me of my 95 cougar xr7 when the fuel pump went out 2 minutes after i filled the tank. I wasnt about to drop the tank so i pulled the back seat, used a cold chisel to cut a hole in the sheet metal, peeled it back and gained access to the pump. Replaced the pump, folded the metal back, put the seat back in and was going down the road within 20 minutes.

    • @DoItWithDave
      @DoItWithDave  5 років тому

      That's definitely a lot more practical then doing what I did here lol. I did however do something similar to what you did when I had to replace the fuel pump on my Chey Astro. There are several videos on UA-cam for that one. Thanks for your comment, and thank you for watching!

    • @JovaniCarmineSellaro
      @JovaniCarmineSellaro 4 місяці тому

      ​@DoItWithDave hey thanks for this I am having same problem with my passat wagon I was about to cut my losses and sell but I have to much in this I'm pot committed then saw this and bada bing gonna do this next week when I have off I'll let ya know how it went tha ks bro bro

  • @kjhgfdsd76654
    @kjhgfdsd76654 5 років тому +4

    Greetings. I'm 99% sure you don't have to mess with the frame to gain access to the bolts (on the oil pan). You simply need to move the sway bar down a little bit. Once the clamps/bolts on the sway bar are loosened you can move it down and away to gain access to the oil pan bolts.

    • @DoItWithDave
      @DoItWithDave  5 років тому

      After I posted this someone from another country commented something similar to what you are stating here. However he said I could have just removed the front engine mount and jacked the front of the pan so the 3 bolts would be exposed. I did this out of frustration (the car is literally falling apart inside and out) and out of curiosity to experiment. Also at the time there weren't great videos on this however I did find a guy who posted a 2 minute video doing something similar (I linked his video in the description section) and got inspired.lol Thank you for watching and for your comment. It really helps the community to get the most information as possible before taking on certain projects.

    • @keegkrino
      @keegkrino Рік тому

      You do have to lower the sub frame. I'm literally changing the oil pan on the same car right now. I started with the sway bar and jacking the engine up. There's one bolt that comes down and is completely blocked by the sub frame. Also the sub frame blocks the two bolts between the oil pan and the transmission. It's a pain in the ass and I'm not a professional mechanic by any means but I'm getting it done slowly but surely. I already have the sub frame lowered. Just need to get the last couple bolts and then swap out the pan and gasket and put it all back.

    • @kjhgfdsd76654
      @kjhgfdsd76654 Рік тому

      @@keegkrino Good luck with that. Nothing seems easy with that car (as far as working on it). But that's German engineering for ya...

  • @loluspololus
    @loluspololus 5 років тому +7

    no oil pressure light , no oil leaks , no problem ,nice video !!!

  • @Veyron640
    @Veyron640 6 років тому +23

    This is the stuff, you typical see at junk yards...
    mind boggeling.

  • @markkuhetula9068
    @markkuhetula9068 5 років тому

    I once had a similar engine consuming too much oil. Ended up cutting a hole through every cylinder bore to gain access to the piston rings. I put some gasoline and WD-40 to them and tried rocking and turning them in their gaps. All the shit that came off, I drained through a similar access hole through the oil pan. Used the same sealant to reseal the cylinder bores, but used more screws to attach the cover plates to each cylinder. Compression test only showed about 5-10 % leakage! Made the engine great again!

    • @DoItWithDave
      @DoItWithDave  5 років тому

      .....Blahahahahha, thanks for watching.

  • @kurtnelson4494
    @kurtnelson4494 4 роки тому +1

    Works good did it on a 06 I used gasket material . The screen had to be 2 more times about 65k miles between each cleaning . Great fix .

  • @jac640619
    @jac640619 2 роки тому +2

    Amazing ! Just an hour? Would have taken me several if I could have done it at all

  • @brandaccount-name7084
    @brandaccount-name7084 4 роки тому +1

    thumbs UP for cutting oil pan square access hole--thats Genue i love your idea.....im set up that way too if it was my car i would do same...

  • @joe003314
    @joe003314 5 років тому +3

    I think vw knows this is a issue with the pick up tubes. They should have been the ones to install a inspection port like you did. But with vw, its always about charging and ripping off customers. I like your idea so pay no attention to those who criticize. Let them do all that extra work pulling that sub frame. Believe me, its not an easy job

    • @DoItWithDave
      @DoItWithDave  5 років тому +2

      Totally agree. An access in the original design would have been great. After working on this car, compared to other makes, it definitely seems vw weren't manufacturered for the home mechanic. I appreciate your comment. Thank you for watching!

  • @takhirishankulov5168
    @takhirishankulov5168 5 років тому +3

    Nice. Thank you for video. I have the same issue. Will try your method

    • @lorenyoung1889
      @lorenyoung1889 5 років тому +4

      Dont...unless you have enough money to buy a motor. This is retarted

    • @strand2001
      @strand2001 3 роки тому

      @@lorenyoung1889 pussy

  • @john_not_jon5694
    @john_not_jon5694 Рік тому +1

    As others have commented about the gasket maker coming off internally, I would suggest anyone doing this to purchase a thin sheet of cork or rubber and make a gasket. I've even used thin cardboard to make gaskets in a pinch.

  • @43IMAC
    @43IMAC 5 років тому +2

    Impressed with how you went about this you took a chance and made it work.

  • @Bceltics112288
    @Bceltics112288 3 роки тому +1

    I can’t believe this is real. Somebody actually thought this was a smart thing to do. And you know 25 young kids that watched this video has now destroyed their cars. Nice job lol

  • @alejandrovega9337
    @alejandrovega9337 2 роки тому

    Where do you buy the drill bit with tap and screws and sealing washers?

  • @ryant6220
    @ryant6220 4 роки тому

    I actually followed this and did it and all but one screw sealed perfectly and one baaaaarely drips and nice or twice every 20 minutes or so. Good enough till my next oil change👍🏼 fixed the problem too

  • @tallcool1ify
    @tallcool1ify 5 років тому +3

    Not a bad idea. I have had several passats, don't ask me why. They all do this eventually and it really pisses me off. I can see how you said screw it and just went for it. The only German car I have that I like is my 74 bug.

    • @DoItWithDave
      @DoItWithDave  5 років тому +1

      Yeah those Passats can be a handful. I see people driving in the old school bugs. There was a group of guys that Mad Maxed theirs out, pretty cool. Thanks for watching!

  • @BMACVAGS
    @BMACVAGS 5 років тому +15

    Its not pretty or beautiful, but If it works, it works.

    • @vrtdubber
      @vrtdubber 4 роки тому

      Except all the metal shavings/dust and silicone in his engine now lol.

  • @DeeBee2013
    @DeeBee2013 5 років тому +4

    great camerawork under the car

  • @joes.7536
    @joes.7536 6 років тому

    I have a 1999 Passat fwd 1.8t aeb. I've never had the oil light come on but I was hoping to clean the pickup tube on my next timing service. Never look carefully but, you cannot drop the pan in the service position?? Not even if you loosen the motor mounts and Jack the motor up a little bit??

    • @simplestatic3751
      @simplestatic3751 6 років тому +4

      Of course you can. You have to lift it from above and drop the subframe. It's not hard. The written procedure sounds worse than it is. But doing this every 100k can be a pain. I understand his approach. Knowing what I know about metalworking and engines, I would have done a few things differently. But I don't see it as terrible as some comments say. Any large shards will be picked up by the pickup screen. Small ones will be picked up by the filter before it gets pumped to critical clearance engine parts. The oil pan is aluminum which is soft metal. I was cringing mostly from the grinder wheel. They are, by design extremely abrasive. I would have probably drilled each corner and used a hacksaw blade or mini recip to cut the rest if I had to. With that kind of work though, I'd drop the pan and cut the access port on the bench, making it super easy the next time.

    • @t3mustanggt05
      @t3mustanggt05 5 років тому +2

      I'm dropping the oil pan as we speak, But while I have it out, I'm very seriously thinking about modifying the oil pan with an access opening, I'm going to look at the oil pan very closely before temping it. @@simplestatic3751

  • @miroslavkotlan1690
    @miroslavkotlan1690 6 років тому +19

    To je odborník!!!!!

    • @TvrdejBob
      @TvrdejBob 6 років тому +13

      Tykrávo, nemám slov! :D :D :D :D

    • @FailerakaSrapeman
      @FailerakaSrapeman 6 років тому +1

      @@TvrdejBob jak se rika - proc to delat jednoduse kdyz to jde slozite

    • @bulitsharp5941
      @bulitsharp5941 6 років тому

      Na slovo vzatý :-D A já si myslel že jsem patlal ale na něj nemám.

  • @g-track5065
    @g-track5065 3 роки тому

    Your the man. You save money and all my Champ!!!

  • @tony5haw
    @tony5haw 3 роки тому +2

    And now all the shrapnal that came off your grinder and saw is now lodged in your engine and being circulated around you system

  • @brittanylaire1892
    @brittanylaire1892 6 років тому +3

    I am trying it now gonna add oil tomorrow hope this works

  • @heroldable
    @heroldable 5 років тому +6

    How cool is that!? I love this! Could have been me, doing that.
    Do not listen to all those negative comments....., it is not a new car.
    Thanks for inspireing with creativeness.

  • @chord7703
    @chord7703 5 років тому

    How is the car now? My car sounds extremely similar idk if I should do this,make a follow up vid

    • @DoItWithDave
      @DoItWithDave  5 років тому

      I have had no issues with low oil pressure with this car since this video. I threw my hands up to make this video. Lol. FYI someone posted in the comments, in Spanish that the front motor mount can be removed so the oil pan can be jacked up a bit, giving you access to the 3 rear bolts. I didn't look but it sounds like a possibility. You may be able to find some info on Google. I hope this helps. Thank you for watching!

    • @chord7703
      @chord7703 5 років тому

      @@DoItWithDave cool thx u so much for being active and replying

  • @Electro5e
    @Electro5e 5 років тому +1

    this is a great Idea and so easy! Why i came not on this idea :-))

  • @dominic9028
    @dominic9028 5 років тому +8

    Good idea, but your gonna have silicone plugging up your pickup now. I would have made a gasket instead. All that silicone is a bad thing. Idea was good just tweak the procedure to include gasket instead of the goop.....

  • @mikerobi6100
    @mikerobi6100 5 років тому +13

    how not to fix your car metal shaving in the oil pan poor vw that his fixed like that
    hack job for sure

    • @diabloein
      @diabloein 5 років тому +1

      Magnets in the pan will catch those shavings. Then there are at least 2 filters anything would have to get through before ever seeing the motor. Really not much risk as long as the pan was the only thing he touched with the drill, saw, or grinder.

    • @braydensummerlin
      @braydensummerlin 4 роки тому +1

      or just pull the damn pan and do it out of the car...

  • @next0845
    @next0845 2 роки тому +1

    Wouldn’t recommend this on something newer, but a good result for an old, high mileage car that’s on borrowed time 👍

  • @davidklimes3905
    @davidklimes3905 4 роки тому +2

    Now you can start working for Boing or Nasa. 🤣🤣🤣

  • @jakeweill
    @jakeweill 3 роки тому

    This is way better than dropping the subframe to access that oil pan especially on an old car

  • @olwethutonisi839
    @olwethutonisi839 4 роки тому

    I need help, I've been struggling to fix my golf 4 gti turbo 20 valve, it's misfiring, I went to several machanic, most of them thought the problem is the spark plugs nor coil pack but I've bought new ones the vehicle is continously misfiring and has no power and it ends up cutting off while driving...

    • @DoItWithDave
      @DoItWithDave  4 роки тому

      I wish I had an easy solution for the issue your car is having. The Passat in this video had soooo many issues, including shutting off at a street light and needed to push it off the street. One cause for me was the fuel pump shutting down ( this gave the feeling of a misfire) after I replaced it the car ran fine for a while. Then the car got to a point where it wouldn't start. I would turn the key mother would turn but no start. I would turn the key the following day and it would start up no problem. I replaced the spark plugs (Passat has plug coil combo) and I would still get misfires. You may find some useful info on VW Forums. Slot of ppl ask and answer questions about their VWs and you may find some helpful info for your make. I really wish I had a better response for you, I know had frustrating this situation can be.

    • @zacharyzooshorion
      @zacharyzooshorion 4 роки тому +1

      I bet your car has a worn upper cam timing chain tensioner guides. This causes over advanced cam timing and loss of power. Just tear down the whole thing and do the head gasket, timing belt, and cam chain all at once. These are not hard to work on

  • @dbguru3055
    @dbguru3055 5 років тому +2

    Ignore all the negative comments. You saved the car from the junk yard, and saved ur wallet. Good for u. I almost did the same thing on my 05 Chevy trailblazer. Dropping the pan is near impossible on that truck.

    • @DoItWithDave
      @DoItWithDave  5 років тому

      I really appreciate your post thank you for watching.

  • @davidwillard907
    @davidwillard907 5 років тому

    Did it work though? You never show if the engine quiets down or not?

    • @DoItWithDave
      @DoItWithDave  5 років тому +2

      You can hear the engine running without the terrible sound at the end of the video.

  • @dkaudu74
    @dkaudu74 4 роки тому +1

    Conceptually its a great idea and every car manufacturer that has sadistic design engineers (I'm looking at you Germany) should take note. However, the fact that you did not clean out the metal shavings from the pan after the drilling and tapping, plus your use of silicone gasket maker (part of which will break off and clog the tube again, are a serious cause for concern. A+ for concept though.

    • @DoItWithDave
      @DoItWithDave  4 роки тому +1

      Thanks for the comment and this was an experiment. An isolating tool would have been a better option, and the 5 year old in me took control over the amount of gasket maker that was used.

  • @raymustaine3274
    @raymustaine3274 3 роки тому

    awesome video!!! never though ill see something like this.

  • @kinderutz
    @kinderutz 3 роки тому +1

    Next time reach through the drain plug hole with a 90 degree pick and poke holes in the screen ....the stuff that goes through the pick up tube goes straight into the oil filter so it's getting caught in there.
    This is a lot of unnecessary hacking ....

  • @terminatortone3785
    @terminatortone3785 5 років тому

    Was it more quiet when u finish

    • @DoItWithDave
      @DoItWithDave  5 років тому

      Yes it sounded normal after I did this. You can hear it at the very end of the video. I had the engine running.

    • @terminatortone3785
      @terminatortone3785 5 років тому

      Thanks

  • @kenchristenson7548
    @kenchristenson7548 3 роки тому +2

    2 +years and 16k miles so far great mod and the VW fix for this was a joke.

  • @henryd9645
    @henryd9645 5 років тому

    Awesom job Dave 👍🏼🤜🏻🤛🏻

    • @DoItWithDave
      @DoItWithDave  5 років тому

      Thank you sir, I get a lot of heat for posting this video. Thank you for watching!

  • @buhhwee2166
    @buhhwee2166 5 років тому

    That is so crazy you did that .. but this is really cool how you thought about this this is a big commitment but shit it works great job

  • @paulmcdonald8055
    @paulmcdonald8055 3 роки тому

    Why doesn’t some design a sump with an access panel on it and market it?
    The VAG group cars all suffer at some point with this problem!

  • @seanthomasrauchert1695
    @seanthomasrauchert1695 5 років тому +2

    The should just make an access door like this would surel make life easier suprised no aftermarket company has designed something like this unorthadox yes but if it workd and u dnt have ocd then right on ! I dnt know ifvi could take grinder to my oil pan ;) seems savage but if its a cheap winter beater who really gives a fuack if its fixed good job!

    • @DoItWithDave
      @DoItWithDave  5 років тому

      The result of throwing my hands up and saying screw it.lol thanks for watching!

    • @2007donny2007
      @2007donny2007 5 років тому

      ECS do a shallow sump conversion where you can just remove the bottom half of the sump. It makes life a million times easier. I wouldn't recommend this video at all. There will be shit loads of metal filings inside the sump after drilling and tapping it.

  • @Photostudioww
    @Photostudioww 6 років тому +9

    That whole thing took one hour. Dropping the subframe would take longer.
    👍🤘

    • @DoItWithDave
      @DoItWithDave  6 років тому +2

      Awesome! I'm glad you found this video helpful. Thank you for your comment!

    • @zacharyzooshorion
      @zacharyzooshorion 4 роки тому +1

      Except you don't have to drop any subframe to do this tho. Derp

  • @blancantoniotnt
    @blancantoniotnt 4 роки тому +1

    Lmao.🤣 😂 🤣 😂 This was a great idea but also hilarious bro. 🙏

  • @SuperAlicat1979
    @SuperAlicat1979 4 роки тому +2

    Please tell me this was a joke

  • @DeeBee2013
    @DeeBee2013 5 років тому +4

    Amazing video

  • @jacksonwanjala6418
    @jacksonwanjala6418 6 років тому +3

    ...this is cool.

  • @damianvidal6644
    @damianvidal6644 5 років тому +2

    Great video man! I'll be doing this tomorrow 😊😊👍

  • @ianvanderhyde708
    @ianvanderhyde708 5 років тому +1

    love it!!

  • @Phil-D83
    @Phil-D83 3 роки тому

    It leak?

    • @DoItWithDave
      @DoItWithDave  3 роки тому

      I drove that car from Fort Lauderdale to Key West to Orlando and back with no leaks, and proper oil pressure.

    • @Phil-D83
      @Phil-D83 3 роки тому

      @@DoItWithDave good to go. Old junker anyways. Good diy fix to keep her doing.

    • @DoItWithDave
      @DoItWithDave  3 роки тому

      @@Phil-D83 exactly where Im coming from. Thanks for watching!

  • @CarringtonHollister
    @CarringtonHollister 2 роки тому

    My 2002 Volkswagen Passat does this same thing as well

  • @BMWI-gk9wh
    @BMWI-gk9wh 4 роки тому +3

    All the metal shaving rip

  • @Anactualrealperson
    @Anactualrealperson 5 років тому

    So hows the car running? I'm about to try this.

    • @DoItWithDave
      @DoItWithDave  5 років тому +1

      It's still running with no oil pressure issues, however because the pressure is back to normal the valve cover gaskets around the spark plugs started leaking some. Besides that I'm at the point with this vehicle to drop a wrecking ball on it. Lol. Seems like something else every couple months. I'm my opinion (case) this car is meant to be traded at 160,000. But I'm sure many Passat owners may beg to differ, depending on how well scheduled maintenance prolongs the vehicle's life.

    • @Anactualrealperson
      @Anactualrealperson 5 років тому

      @@DoItWithDave I'm sure it's different cars, I'm just worried about the shavings. I can't imagine doing that would cause that, but I do appreciate your feedback tremendously the fact that you replied is awesome enough.

    • @lorenyoung1889
      @lorenyoung1889 5 років тому

      I am honestly shocked it is still running...i have over 200,000 miles on mine and it runs just fine...your cars dont last past 160,000 because you do hacck jobs like this

    • @Anactualrealperson
      @Anactualrealperson 5 років тому

      @@lorenyoung1889 right I just got mine out of the shop and it's running perfect again, I have 240,000 miles on it and am ripping gears like it has 100,000, this dude just wants people to fuck they're shit up

    • @DoItWithDave
      @DoItWithDave  5 років тому +1

      @@lorenyoung1889 I got this car as a beater. Like everything falling apart interior exterior way before I ever did this "don't try this at home" video. Fact is I threw my hands up on this one. Having worked on this car since 2015 doing things like the water pump O Ring..just want to thank VW for making that O Ring extremely accessable JK to vacuum check valves. And if I brought this one to the shop, repairs for this car would be enough to buy it 6 times over, yes I get want I pay for. Also I've seen some of these Passsts around town and it's obvious how nice they stay if maintained properly. Seems like you got a polished up one, I honestly don't mean to offend any Passat owners out there, they are fun cars to drive.

  • @agreisxena
    @agreisxena 5 років тому +1

    honestly I cannot understand, why the hell did not you screw the sump off from the bottom of the engine, swap that part of the pump with a new O ring and srew the sump back??? why was neccessary to cut off a part of the sump???

  • @neilmchardy9061
    @neilmchardy9061 4 роки тому +3

    Putting that much gasket paste could cause the filter to block again.

  • @christianrodriguez3793
    @christianrodriguez3793 3 роки тому

    OMFG ....a hole in the oil pan!
    Hey bro if your cool with that it's all good.

    • @DoItWithDave
      @DoItWithDave  3 роки тому

      Man ppl have posted I could have removed front motor mount and jacked front of engine enough to access the rear bolts. Apparently I was supposed to lower the subframe and support the engine from the top to my knowledge at the time and I just didn't have the tools to do so.

  • @Professional_Youtube_Commenter
    @Professional_Youtube_Commenter 4 роки тому +1

    work smarter not harder, if the sump was blocked by the frame and you couldn't access it, then just pay a mehcanic to sort this for you. You just created a whole world of problems for yourself. A mechanic might look at the hack job and charge you more to work on your car becasue he's going to expect more hack jobs to get in his way.

  • @SSamBBa
    @SSamBBa 3 роки тому

    Why not just drop the oil pan? 😥

  • @alexandrustanescu3115
    @alexandrustanescu3115 5 років тому

    is disassembled from screws

  • @matta7978
    @matta7978 3 роки тому +1

    That’s a lot of gasket material

  • @aRYANz88
    @aRYANz88 6 років тому +1

    Top tip change the oil pressure senders first. Check the wiring. They have a two tiered system. Low oil pressure below 2100rpm and low oil pressure above 2100rpm. Sometimes the wires will come off or become corroded check those. I don't recommend anybody do this. Just drop the pan.

    • @DoItWithDave
      @DoItWithDave  6 років тому +1

      Thank you for sharing. If it's possible for someone to easily drop the pan on this model I agree with doing that rather than what's shown in this video. This model has many steps and one needs many tools to properly drop the pan. If you read a comment below someone mentioned how to access the 3 rear bolts (those are the ones that are not accessable) by removing the front motor mount then Jack the front of the engine giving just enough space to get a wrench in there. I would have done that over this if I'd known. Bit this car has been such a pain I threw the dice and it worked.

  • @Bluegrassriver8
    @Bluegrassriver8 5 років тому +1

    Unorthodox you say? How about radical! But roughly brilliant! That was very enjoyable. Now, the orthodox method of gaining access ,you said, was to drop the frame. That would also be interesting to better understand and see done. Poor access design, you said. Millennials would have designed it differently for sure. There would be an access panel on the pan that opens with a phone app. The app would also monitor the pick up volume and pressure. LOL. After reading all the comments I don't think they understand you searched for metal shavings with your finger. The liquid gasket is designed to use with oil so it won't disintegrate. PLus they forget you are not working on a $40,000 new car. There was a valid comment about how they would have cut the metal differently by drilling four holes and using a saw instead. I would also suggest you change the oil filter more frequently after a job like this. The Passat is an awesome style. Now put some racing decals on it!

  • @codyfeck6190
    @codyfeck6190 5 років тому +1

    This works perfectly. I did it and also with the hole i cut out i added more clearance for the pickup tube so the suction neer the bottom of the pan wouldnt be close enough to pick up shit. VW had a shit design to start with this guy just made it better.

  • @isaacnoel8373
    @isaacnoel8373 3 роки тому

    I wonder if he realizes that all you haft to do is take loose 4 bolts and 2 nuts then lift the motor 4 inches and you can pull that oil pan super easy🤔

  • @slammedeuro104
    @slammedeuro104 5 років тому +1

    Been thinking of doing this for me AEB as well.

  • @chrisfiat
    @chrisfiat 5 років тому +2

    What kind of an idiot does this.... the kind that never changes the oil so the pickup plugs up

  • @bgott35
    @bgott35 3 роки тому

    I genuinely hope this is a joke. This is one of the most ridiculous hack jobs I have ever seen in my life.
    Please, if you care about your car, do not do this.

  • @matthewlee2686
    @matthewlee2686 6 років тому

    My gfs car sounds the same way and flashing the same light I hope the head isn't damaged. It sounds like a diesel engine as of now

  • @davidbradley3982
    @davidbradley3982 5 років тому

    i have no grinder or drill....

  • @andrewuk184
    @andrewuk184 8 місяців тому +1

    This is a joke, right?

  • @reynettbezuidenhout4572
    @reynettbezuidenhout4572 5 років тому

    That can be the problem if my car dont want to go if I put my feet on the petrol

  • @davehodgkinson9582
    @davehodgkinson9582 5 років тому +6

    what a bodger!!!! would have taken less time to take the sump off and do a PROPER job with a new £20 pick up pipe

  • @MCKW-MTB
    @MCKW-MTB 2 роки тому

    Way to follow the manufacturers instructions.

  • @jerpurcell7691
    @jerpurcell7691 6 років тому

    How far did you get before it blew up 😂

    • @DoItWithDave
      @DoItWithDave  6 років тому +5

      It's still going. The thing is there's a small leak around the cam cover (which happens to these vehicles) about 6 months after I did this. Pretty sure it's partly from having the proper oil pressure after cleaning the pick up. This car has had a new issue ever couple of months and at this point it's more of an experiment car than anything. Thanks for watching!

  • @mattblackledge9068
    @mattblackledge9068 8 місяців тому

    Why do it properly when you've got a grinder and a tube of sealant. 😂

  • @FalkensteinSoma
    @FalkensteinSoma 6 років тому +3

    Wtf are you doing? :o

  • @michaelrodriguez8345
    @michaelrodriguez8345 4 роки тому

    Its not the surgery that killed the patient. It's the staff infection. All those metal shavings. I don't think he addressed cleaning that stuff out once. All that gasket maker didn't help things either. Good idea, bad execution.

  • @hvmvp3657
    @hvmvp3657 4 роки тому

    This is the complete wrong way to do this, take the cover off properly, what you have done is lower the life of your engine because there is no way you got all the shavings out, special award for award though, you just love grinding, must feel like a real mechanic, what you should have done is grind the shit out of the pickup too why not

  • @alexandrustanescu3115
    @alexandrustanescu3115 5 років тому

    do not cut the oil bath

  • @jonnyboy2504
    @jonnyboy2504 4 роки тому

    He doesn’t smoke meth................😂😂😂🤷‍♂️

  • @BMWI-gk9wh
    @BMWI-gk9wh 4 роки тому

    Tf!? This is some back yard Kentucky auto sales boys. Fyi you supposed to take the pan off and do it correctly

  • @sebastianmiticky2491
    @sebastianmiticky2491 4 роки тому

    what just i saw

  • @turboderbik
    @turboderbik 4 роки тому

    wow i hope no one have copy this shit idea . take sump and clean and put back is around 45min job

  • @fiuskorpion
    @fiuskorpion 5 місяців тому

    masakra.... ludziom się nie chce silnika podwiesić 5 cm i zdjąć normalnie miskę jak człowiek....
    gdybym takie coś zrobił w robocie to bym wyleciał dyscyplinarnie

  • @jankindl915
    @jankindl915 6 років тому +1

    Tak teď už sem viděl všechno :D

  • @brcars1622
    @brcars1622 4 роки тому

    Wow, Ive never left a comment before. But this is the biggest hack job video ive ever seen. DO NOT DO THIS to your car. You should be ashamed trying to pass this on as "knowledge" unbelievable