Build The TAMIYA FIAT 500F

Build The TAMIYA FIAT 500F
#modelcar #fiat500f #scalemodeling
Tamiya 1/24 Fiat 500F
This time I made Tamiya's Fiat 500F.
This kit is well reproduced in both the engine and chassis.
*Engine
I wired it to the generator, carburetor, and plug cord.
Since it is an air-cooled 2-cylinder engine, there is plenty of room for the plug, so I made a plug cord with 0.4mm electric wire and aluminum pipe.
The right side of the engine compartment is empty.
In the actual car, something like a switch is arranged.
I installed the appropriate parts.
I thought I could install the battery, but in the actual car it is installed in the front luggage compartment.
* Car Body
The campus roof was rebuilt using tissue, nickel silver wire, and copper plates.
I made a belt to fix Hood and the car body with a plastic plate and a copper plate.
I often see it in a real car.
Did the hood open while driving?
* Trunk and rack
I made a trunk with plastic board, tissue, brass wire, and brass pipe.
I made a rack with 0.5mm Nickel-silver wires.
* Inside the car
Place candy boxes, tissue boxes, model boxes, etc.
And I put the T-shirt on the sheet.
Next, I will make a small Japanese car.
Let's meet again!
thank you very much.

[@gdd29]

これはもはやプラモデルのメイキングではなくアートのプロセスの動画だ。こんな世界があるとは知らなかった。動画ありがとうございます。

[@scalemodeler]

こちらこそ、動画を見て頂いて、コメントまで残して頂いてとても嬉しいです。
ありがとうございます！

[@megloton]

Roberto: “But Giuseppe will paint it for $25.00”
Enzo: “Then tell him to wax it too”
Love your work

[@keiji2150]

素晴らしい作品ですね。
みているだけで癒されます。

[@scalemodeler]

嬉しいコメントありがとうございます！
来年もお会いしましょう！
良いお年をお迎えください。

[@250gtrrs6]

凄い！　哀愁が漂う作風が素晴らしいです(^O^)

[@scalemodeler]

ありがとうございます！
最近再販されましたね。
今度はルパン乗せたいです。

[@heartbig6275]

凄い✨器用、自分も作りたい、こんなに器用に作りたいな🎵わくわくする、ありがとうございます✨

[@scalemodeler]

ありがとうございます😊
まだまだ生活感出すのに試行錯誤ですが、邁進していきたいです！

[@user-bm6fc6fi7e]

いつ見ても流石です🥰
Tシャツ👚のシーンスパチュラでの布地表現が素晴らしい👏👏👏
こう言う事が私には出来ないので羨ましいです😍

[@scalemodeler]

ありがとうございます😊初めて買った車にTシャツ被せました。今はそんな事しないですよね。フィアットって今も昔も変わらず可愛いですね。どうしても、ポンコツで味のある車が好きです。😊

[@styrenehelp]

This is an outstanding work of art.

[@scalemodeler]

Thank you so much🙏😊😊

[@laurentbouveyron5362]

encore du super travail bravo j'adore les détails que vous apporté

[@scalemodeler]

Je t'envoie mes remerciements !

[@MegaPiano2010]

Outstanding! Do you let the washes dry before removing them with the cotton bud and if so do you dampen the bud with thinner and what kind?

[@scalemodeler]

When mixing colors, wipe off without drying.
And when weathering the whole with the same color, wipe it off without drying it.
And if you want to leave particles of weathering color, dry it and wipe it off.
The effect is different, so it's good to try and choose.
Thank you😊

[@el_patito_insano_no.1]

i want to make my own 500, add wiring details to the engine and the rear rack with a bag

[@el_patito_insano_no.1]

also an indian taxi design, he he

[@scalemodeler]

Fiat is a stylish car, so if you add various things to it, it will turn into a nicer car.
I hope your fiat is complete!

[@el_patito_insano_no.1]

@@scalemodeler thank you