Mobile Water Well Drilling Rig I My First Bad Borehole
Вставка
- Опубліковано 8 тра 2021
- This time I made a mobile platform for drilling water wells. For the construction of the drilling rig, the geared motor 2.2 kW rpm 60 was used. The set includes drilling rods with a total length of 30 m
During my first borehole, I drilled a total of 21 meters and found only rocks instead of water
I've worked on a few hundred oilrigs over the years and I have to say your ingenuity is impressive with this design.
I've been watching a bunch of these DIY well drilling videos. This is the second one I've seen from Europe and I can already see a big difference between the EU approach and the US approach. There are lots of people in the US who dig shallow wells, but many of them seem to use a lot of water to drill the well. All of their contraptions require a flowing tap and hundreds/thousands of gallons of water to dig a 25-foot deep well. Whereas, the two EU guys who have done it devised these small reservoirs that capture and reuse most of the drilling water. This approach definitely seems to make more sense. Great video!
Check out rc Crawford???
المياه المعادة استعمالها مثقلة بالطين، وقد تخرب المضخة
@@bbb12222 нет, используй насос для грязной воды.
In the USA it’s called a “trash pump”
@@chrispicritters4710 Thanks, but I was referring to some other UA-cam videos I've seen of folks in the USA who actually use flowing water from a tap to jet out the hole they are drilling. My comment was about how this guy re-used the water over and over. Pretty smart.
Cool machine. Nicely done.
Fantastic build. Thank you for sharing.
Hello dear we are also Producing water when drilling rig machine please check in our channel
I got to help drill 3 water wells in Zambia... We used an LS-100 portable rig from Lone Star Drilling Company out of Texas... this rig reminded me of the LS-100...
Красава Димон, ща пойду такую мутить. Спасибо большое за идею.
Muy buena idea y muy bien implementada. Mis felicitaciones y muchas gracias por compartir. Saludos desde Chile
very impressed. very compact.
Просто молодец! Буровая ,это инструмент а опыт придет уверен!
It's very nice and simple portable well drilling machine. Bravo.
Fajny film 👍👍👍
Well done sir! Nice fabrication
Pôr gentileza gostaria de saber se este tipo de makina tem pára venda qual valor e se entrėgão
You are a gennie a$$ and I mean that in the best possible way, you are my hero, man, great job!
كم السعر هذي
C'est inspirant et magnifique 🥰
Well done 👍 No pun intended.
Thank you for sharing!
I would love to buy one of these the design is incredible.
Nice simple design. If you can drill rocks. You can drill anywhere
nice setup
Inspirational video actually
THats very cool. Overkill if your just drilling one. It’s nice that 240 is your standard.
Perfurador Bom bem reduzido fácil para transportar e instalar.
Muito lindo!
Great build!
On the water return. If you keep the intake floating on top , to get less dirt etc .
I am sure with your improvements and learning experience. You will have that satisfaction of a clean drinking water well.
It is never easy.
Good luck 👍
ajtwpddl
Zo'r ixtiro xalqqa foydasi tegadigan
Great just a question where did you get the motor/gearbox assembly and the connection part water inlet pipe? I mean i want build one my self thanks
It is a very useful device, especially in times of water shortage. I wish I had something like this.
Is very good,,,bro....
Nice job sir
Mesin Bor Sumur sangat praktis ini samgat cocok digunakan tidak berisik. 👍👍
Que habiloso eres amigo.. 👍
Good job
Very cool
Nice Rig by the way. I come from a semi arid area in Kenya and i would like to build me one of these in the near future so that i drill wells in my community as a way of giving back to them.
Excelente trabajo felicitaciones!!
Quisiera saber de cuantos HP es el motor que hace girar la mecha,
Un abrazo desde Uruguay
Good jop with good skills
I too spend some years on drilling rigs, and love how you managed to get to the core of the drilling process. I think you could use it easily also to make vertical geothermal wells for home use with a heat pump. Can you tell what max depth you reached?
Esta máquina puede perforar una roca???
Using water could destroy walls of the hole, he should reindorce them
Câți kw are motorul și ce tip de reductor are ?
You tried your best. I know you will do it perfectly next time 👍
editor's report?
Класс . Хорошее решение
Where did you get the gear motor and what are it's specs and partnumber? Same question on drilling pipe?
Keep trying it takes a long time to learn well drilling I did it for 4o years I was still learning only thing is electric an water don't mix dangerous
Excelente maquina diámetro de tubería es el adecuado para esa máquina
Bravo
My greeting well done
Amazing ingenuity and build quality. Can you tell us what brand of electric motor and gearbox you used for this machine? Thank you.
Greetings. What are the details on the motor and gear reduction, winch rating etc. Thanks!
I would definitely back-ream every joint before I made a connection. It’s just good practice that is worth the extra minute.
wow veery very nice
What pipe thread NPT or ?. I made mine with an two -person post hole digger. It came with an engine and transmission that help with torque. I had to buy a water pivot but worked down to 100 ft no problems. Most problems occurred with the pipe
Nice
I think you may have been nearly there. Water settles in the gravel layers, so if you were getting only gravel you were somwhere near the right place. Bear in mind you might have to go through gravel layesrs to reach the right one. Its a good idea to talk to others in the locality and find out if they have a borehole and how deep they had to go.
一
True
Amazing! I would like to build this. Do you have a parts list for this build? Thanks!
It is amazing. I'm interested to know the list of parts involved in building it. Thanks.
Nice work, could this setup be used to drill solid bedrock? Rotary hammer?
Nice sir
Thank you for sharing your project...
If you don't mind, the hp of the motor and the gearbox and output speed rotation of gearbox.
Great job 👏👍👌🙌 what is the maximum depth & what diameter
that model of drill is very good it is well done how can I have all the manufacturing data
Круто !
What we got down there?..Yella nugget??!..😂
Very nice looking drill. I know your first hole did not work, so what about another one ?
It's an excellent machine, I want to buy one like it, where can I buy a machine like this
good job! can you tell me what kind of drill you use when you get to a layer of gravel? thank you
I only have one drill. In the future, I will make another smaller diameter drill to test the substrate. Greetings.
@@Cypsmen please can I have your WhatsApp number
This machine belongs to the company, how many rupes. Is
I’d like to build one, can you share the tech drawing please? Also for swivel it should be bought correct?
How many meters does he dig? And how many inches of water does it take out?
Great Build, but how much can drill the machine?
If you can guides me with the max capacity of drilling can be great.
Thx for the guides
I can drill a maximum of 30 meters as the drill depth is.
awesome! what motor is that and what part is that at 20 secs in
This is a 2.2 KW gear motor 56 rpm.
This is "water swivel" and is essential for drilling with this method.
I need order one set how order
@@Cypsmen do you have a link to where I can buy that swivel?
I ran rigs 40 years ago after a couple of wells you get the hang of it. It’s not that complicated. Especially after you drill wells with a thousand pounds on them.
From Dominican Republic
Where do you get your drill stem fittings and drill stem?
First lesson :ask the neighbours , do they have a well , how deep is it and what is groundwater level
You better go deeper man lol
In the state I live you can look up well locations and depth
@@Imwright720 You can find these things on internet , but they don t tell you if it s possible to drill and how deep you have to drill . I ve made many wells 20-25 meter deep with a groundwater level of 3-4 meters.
When I walk into a garden and i see all those IBC -containers in the neighbours garden i turn around and go home.
@@haynillesen it’s true you won’t know for sure what your going to hit. However my area is all sands with a coral shelf about 2-4’ thick at 6-12’ down. We have lots of canals and when the water level goes down you can clearly see the shelf. Also , if you ask drillers they will tell you. I made a bit using electric conduit and drilled through it. It wasn’t easy. The county goes to 45’ here for sprinklers. I was shooting for that depth but as I was going down the water coming up just disappeared. I tried bentonite but it didn’t work. In the end it didn’t matter because I have nice clean water. That was 2013 and it had never run dry. I jetted down but I should of driven it down using a jackhammer.
@@Imwright720 Close to the ocean , no salty water?
Put a link to all the parts needed for the build
what depth can be drilled, how much does it cost and how to order from Indonesia
You need bentonite to stabilize the hole
Among a lot of other things
muy bueno
GOOD
Asta cuántos metros de profundidad puedes perforar la máquina
I made a machine similar to that but I have a problem because where I live is mud (muddy from which the water comes out with a bad smell) I have had landslides and the water is lost I don't know what they recommend to me to be able to make my well I already bought a small window but I haven't tried it yet
What kind of pipe is used for drill stem can regular steel water pipe be used
Do you have a drill kit or materials list with links to make or buy the drill used? What was the final cost?
Hello Cypsmen, nice rig you have built, I guess I could ask the same question every body is asking? You have your prototype, are you making portable rigs? Looks like a investment if enough people are willing to pay the price. After all most people would rather pay the price for a rig that is ready to go as to building one, All I know is I do not see one like yours for sale. thx
I don't build rigs for sale. I only made one for my needs. There are many advertisements on the Internet with similar rigs. Greetings
@@Cypsmen Hi brother if you can make one for me how much it will cost?
nice job my friend!i would like to ask you:are you sure that rpm is 60?i count 120rpm,secondly what is the size of the pipes??thank you!
How did you build the drill stem water port
Design can be little modified to drill fast and in hard or rock strata, just use the rope of winch in loop so driving forward n reverse you can further force the drilling, but in rock you would have to change your drilling bit
Yes, you are right. The head no way can deal with rocks.
What are the specifications of the motor and gearbox?
Any chance showing us the water swivel build please.
What drill cutting head do you use when contacting rock or granite?
They dont bc they arent using an air rotary dth hammer.
Dear brother, can you inform me abou link order Motor 2.2KW includ gear box ???
What is the power of the engine you used
How do you make that water swivel?
Very impressive. Is that 3 phase motor? If it is what generator you will recommend to run in USA ? Thanks .
I am impressed looking at your production, I would like to make one like yours, where can I find the motor and the kits?
Nice video, what's the brand of drilling rig?
Świetna robota! Z czego wykonałeś żerdzie?
Rura stalowa bezszwowa ze stali konstrukcyjnej fi 51mm ścianka chyba 5 mm, zworniki żerdzi kupiłem pod rury, z gwintami wiertniczymi ( trapezowe stożkowe, wykonane z stali wysokogatunkowej) Pocięte rury zespawalem z zwornikami tak aby wyszła żerdź 2 m.
👍
Hola buenas noches, felicitaciones tan bonito invento deseó que me compartas la información de motor
esta maquina cuanto de profundidad puede llegar gracias?
What is the horsepower of the engine you used?
The design is really cool..
did you make the water swivel as well ??
Did you buy this motor ready? You made it with your own hands...a good and beautiful job
Yes I bought a motor (gear motor). Thank you and best regards.
Sir may ask from where did you buy this motor gear box? Whats the specification? Thank you
@@Cypsmen what is the watte and voltage of this motos ?
@@youssefhmicha6623, in the description of the video is mentioned 2.2kw, 60rpm, geared motor. I presume 220-240V, 50Ah.