Very well explained and without words. I just installed one of those doors, it's my first time, and I can see I made a mistake, the hinges must go deeper. Thank you very much, your video has been very useful to me.
I bought a few sets of Everbilt double hinges from Home Depot and the leaflet instructions were so misleading, incorrect and missing steps I had to watch this video to understand how to do it. And I have built entire additions, garages etc for years. I am no stranger to DIY and the instructions that came with the product were so misleading.
I love the way you mounted these! I've seen no one else do it this way. Just bought some antique double acting hinges. Going to use your method of mounting on a pantry door. Thank You very much!!
I have been always selling this double acting spring hinges, but i had never saw such a skilled carpenter for installation of the spring hinges. Thanks for your good sharing. Very perfect installation! But sometimes, i am not really sure of that their loading rates for different door weights/width because there are several common sizes of the spring hinges from 3" (76mm), 4" (101mm), 5" (127mm), 6" (150mm), 8" (200mm), 7" is rare. One more question about the door thickness especially metal door thickness will define size between two barrels of the spring hinge.
Hi. I have a super heavy swing door at home in which one of the hinges is making very loud spring-y kind of sounds. Is it ok to pour oil on the hinge ? Will that spoil the door installation or make the doors loose ?
Eu faço dessas portas mas eu não faço desse jeito não,do jeito q eu faço é mais prático,mas é a quilo cada marceneiro tem seu próprio jeito de trabalhar...
Is there a hinge that lets me mount a door to a wall and then opens to 270 degrees? Most doors open to be flush against a wall at 90degree, if there is no wall, you can open most doors to 180. But I'm putting a door on a wall and then I want it to bend all the way around and be flush against a wall 270 degrees later. Is that possible with hinges?
Hi. Do both bottom Hinges have the hole adjusters on the bottom. I saw you adjusting the bottom and wondering if the top hinge adjustment holes on the top. Thanks
Sorry. Confusing myself. I have installed my double doors. The left side has the adjusting at the top and the right at the bottom. Is this correct? As I noticed you were adjusting a door on the clip from the bottom.
i am looking for hinges that will allow me to use the same door to lock in two different doorways. say one way would be the normal placement and then the other doorway is at a 90 degree angle. would it allow me to open the door 180 degrees?
What a fantastic very easy to follow guide, on how to fit a set of swing hinges, without this excellent guide I’d not have a clue thank you soooo! much. 👍🏻
@@mardakworkshop4450 i did it but only thing i had to do was cut the door little deeper for the hinges, add little wd40 and tighten hinges and worked perfectly, swings back and forth for the kitchen, at first wasn't sure if it was gonna work, thankfully it did
It‘s the only movie i found to make this kind of bar-door. Thank you very much for detail showing how to doit. I need to make 5 bar-doors (for doog) like that. Now i know and can doit 👍👍👍👍👍
Great video but I have a question please ... how can I set the rotation angle for 180 degree and at the 90 degree the door stop moving is that possible with the double hinged ?
i'm sorry but does cat have your tough? why aren't you talking us through this?
Thanks. I am not a good carpenter so after this video I am returning the hardware to home Depout tomorrow.
Start learning then
Very well explained and without words. I just installed one of those doors, it's my first time, and I can see I made a mistake, the hinges must go deeper. Thank you very much, your video has been very useful to me.
I bought a few sets of Everbilt double hinges from Home Depot and the leaflet instructions were so misleading, incorrect and missing steps I had to watch this video to understand how to do it. And I have built entire additions, garages etc for years. I am no stranger to DIY and the instructions that came with the product were so misleading.
Jeff, I’m literally trying to use those EXACT same ones and I can’t figure it out for the life of me.
I love the way you mounted these! I've seen no one else do it this way.
Just bought some antique double acting hinges. Going to use your method of mounting on a pantry door. Thank You very much!!
thanks for your comment and thanks for watching ❤️❤️❤️❤️❤️❤️
nice just nice thanks for that veto
I have been always selling this double acting spring hinges, but i had never saw such a skilled carpenter for installation of the spring hinges. Thanks for your good sharing. Very perfect installation! But sometimes, i am not really sure of that their loading rates for different door weights/width because there are several common sizes of the spring hinges from 3" (76mm), 4" (101mm), 5" (127mm), 6" (150mm), 8" (200mm), 7" is rare. One more question about the door thickness especially metal door thickness will define size between two barrels of the spring hinge.
Obrigado por compartilhar, me foi muito útil 👍 Grande abraço aqui do Brasil. Sucesso.
Anyone else think most doors in most homes should have these hinges? Pushing doors is nicer and no doors ever bang. Bedroom door locks can still lock.
Very helpful. Got mine installed today!
Thank You! Been wondering about installing on a 4x4 gate, now I know how.
Get him off he's not explaining what he's doing...
Very nice. Please talk through it.
Gracias! Me ayudó mucho con la instalación. Excelente video! 👏🏼👏🏼
🧡🙏🏼🧡🙏🏼🧡🙏🏼
Beautiful job! Would that work for a full length door? I have two undersized doorways in my finished basement that I'd like to install doors in.
It can be but if the door is too heavy you’ll have to put more hinges
@@mardakworkshop4450 Ah… clever.
Like it I'm dealing with one in San Antonio Texas
Thanks for this video. (From Brazil) 😉
Great video. What is the name of the first song please?
Hi. I have a super heavy swing door at home in which one of the hinges is making very loud spring-y kind of sounds. Is it ok to pour oil on the hinge ? Will that spoil the door installation or make the doors loose ?
all hinges need lobrecation from time to time thanks for your comment
Eu faço dessas portas mas eu não faço desse jeito não,do jeito q eu faço é mais prático,mas é a quilo cada marceneiro tem seu próprio jeito de trabalhar...
Excellent video. How big is the gap between doors if any?
Around 5 cm
Nice job. Thanks for the video.
Is there a hinge that lets me mount a door to a wall and then opens to 270 degrees? Most doors open to be flush against a wall at 90degree, if there is no wall, you can open most doors to 180. But I'm putting a door on a wall and then I want it to bend all the way around and be flush against a wall 270 degrees later. Is that possible with hinges?
I think that can be possible if you fix double hinges one open another but again it will take a lot of space Because you need a spacer between them
@@mardakworkshop4450 I think I found it. It's called Overlay Hinge. Had to order it online. Hope it's what I need.
@@Andrew-hp1yj if it’s work out for you send me the picture you can find me on instagram @alnajar22269 thanks 🙏
Hi. Do both bottom
Hinges have the hole adjusters on the bottom. I saw you adjusting the bottom and wondering if the top hinge adjustment holes on the top.
Thanks
Hi thanks for your comment the both hinges are the same exactly
Sorry. Confusing myself. I have installed my double doors. The left side has the adjusting at the top and the right at the bottom. Is this correct? As I noticed you were adjusting a door on the clip from the bottom.
@@pah9844 doesn’t make any matter up or down they are both the same
I have question this hinges can hang a door of how many kgs maximum
Don’t know exactly but the more have the door is the more hinges you should install
I got a problem with that double acting hings , may I ask you some question ?
Is it possible to have your other social networking?
hi you can find me on instagram
@ alnajar22269
No tiene audio , pero se entiende perfecto .
Felicitaciones por su trabajo.
Saludos desde Chile
teşekkürler.
Muy bien Mario Bros, ji ji
👌👌
What makes the door running at the top, they hit each other at the top ?
Tight Moore on the Springs so the door pull in immediately
i am looking for hinges that will allow me to use the same door to lock in two different doorways. say one way would be the normal placement and then the other doorway is at a 90 degree angle. would it allow me to open the door 180 degrees?
What a fantastic very easy to follow guide, on how to fit a set of swing hinges, without this excellent guide I’d not have a clue thank you soooo! much. 👍🏻
Beautiful work. Very good explanation
Thankyou!
My hodge is flopping at the top
thank you
it was very helpful ;)
Nice jobs!
thanks👍
Why couldnt you just make the hinges directly to door instead adding that so called spacer??
It will not fit correctly and it will make a hell of noise banging to the frame while it’s open and close
@@mardakworkshop4450 i did it but only thing i had to do was cut the door little deeper for the hinges, add little wd40 and tighten hinges and worked perfectly, swings back and forth for the kitchen, at first wasn't sure if it was gonna work, thankfully it did
tnx for video.excelent
Good video thank you
Very interesting
ğ
well done, thanks forb the help
What is the background music?
not show exactly just downloaded for youtube music library
Perfect
what brand of hinge is that? Where do you get it?
Yes, looks decently made.
Great step by Step by Step video. Thanks for sharing your knowledge. Cheers.
Thank you so much
Thank You!
Thanks a lot, I bought a package but no install guide. Very clear explanation from Mexico.
you welcome thanks for watching ❤️❤️❤️
راااائع
Thank you 👏
Super, gracias Mardak.
All right!! Another Top Tier Craftsman to follow!!
Beautiful!
Awesome!!!
You know they sell different size hinges for thicker doors
I see that the spacer is as wide as the door but how thick is it?
It‘s the only movie i found to make this kind of bar-door. Thank you very much for detail showing how to doit.
I need to make 5 bar-doors (for doog) like that. Now i know and can doit 👍👍👍👍👍
Bueno bueno bueno todo muy bien explicado y sin tanto hablar me encantó a si manos a la obra.
Basically the average call of duty door
Thank you
Very helpuful
Installing one for my client
What is wrong with the sound??
Excelente video, felicitaciones.....
Which brand?
Hey,
Thank you for that video. Very useful. Im going to use these hinges for a baby safety door. Just wondering, how thick was the wooden spacer?
The thickness of the spacer is the same thickness of the door these hinges come in different sizes
Very nice work my friend
Good
Kha mile ga
A very good video but ,for a novice like me,I would need an endless supply of doors or a University degree in hinges before I could fit those !
رائع 👍👍👍👍👍
Hi
that was awesome....I can do that
Candi Prause thanks 🙏 ❤️❤️❤️
Perfeito! 👍🏻
v55 e5 uhye
3 25th t j
qw
jcfloor
o 3
o 3
the best video I've ever seen to install this hinge. Congratulation.
Great video but I have a question please ... how can I set the rotation angle for 180 degree and at the 90 degree the door stop moving is that possible with the double hinged ?