GREAT video. I just took over QC at my company and we had so many mics out of service because of barrels were off and I guess no one took the time to figure out how to fix them. This was HUGE help thanks!!
Thank you very much for showing how to repair / reset a micrometer. I dropped mine and couldn't get the calibrations back in the original position. I didn't know the procedure on pulling the barrel out procedure. Can't wait to get in my workshop in the morning and cure the problem
Thank you so much! Just bought a used micrometer and its thimble was off by 15 thousandths from the digital reading. It's a digital Mitutoyo and it works the same way on the thimble assembly. I really appreciate the help.
Thank you for the video! The ratchet on my micrometer doesn’t work properly. If you click it more than one time it moves the thimble too far and gets stuck. How can I do it? Thanks again!
Sounds like the spring for the ratchet is messed up. It may have just disconnected from the slot or if it broke then you can just remove it or replace it.
Thanks! I just bought a micrometer and I did not understand that small part of the key, the one you used first, to make the first adjustment. Now I understand it all. Thanks again!
Had an issue with a customer mic. The zero was position 90 degrees down when i checked it. But when i saw how you popped the barrel off, I did the same to the mic I was working on and it reads perfect across the range. Just when you think you know something, you learn something new.
Thanks for sharing this video. I am taking some machining classes right now. Watching this video filled in some gaps I didn't understand when reading how to calibrate a mic.
W⭕W this was very helpful and helped me celebrate my fussy Xmas present mic...it was 3 microns out on the vernier with a very stiff sleeve. The thimble removed easy and I managed a good zero-line-reset. I collect quality mics, have about 15 of em, all B💥NG on accurate to the micron or 10thou.
first step after using test peice is to doble check all faces clean . the check again . I seldom have had to adjust a micrometer despite the fact they are used often and often not treated well
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
GREAT video. I just took over QC at my company and we had so many mics out of service because of barrels were off and I guess no one took the time to figure out how to fix them. This was HUGE help thanks!!
Same! This vid helps tremendously
Thank you for this detailed video. The tip to tighten the micrometer in a bench-vice was exactly what I needed to adjust my tool perfectly.
Thank you very much for showing how to repair / reset a micrometer. I dropped mine and couldn't get the calibrations back in the original position. I didn't know the procedure on pulling the barrel out procedure. Can't wait to get in my workshop in the morning and cure the problem
Thank you so much! Just bought a used micrometer and its thimble was off by 15 thousandths from the digital reading. It's a digital Mitutoyo and it works the same way on the thimble assembly. I really appreciate the help.
I just inherited a vintage Browne and Sharpe that needs minor adjustments. Your video helped me do so
Thank you for the video! The ratchet on my micrometer doesn’t work properly. If you click it more than one time it moves the thimble too far and gets stuck. How can I do it? Thanks again!
Sounds like the spring for the ratchet is messed up. It may have just disconnected from the slot or if it broke then you can just remove it or replace it.
I really appreciate your quick response and the information! Where can I purchase the spring from?
@@alexk.6657should be able to google the make and model parts and something should come up.
You’re absolutely right! Thanks again!
Thanks! I just bought a micrometer and I did not understand that small part of the key, the one you used first, to make the first adjustment. Now I understand it all. Thanks again!
Had an issue with a customer mic. The zero was position 90 degrees down when i checked it. But when i saw how you popped the barrel off, I did the same to the mic I was working on and it reads perfect across the range. Just when you think you know something, you learn something new.
Thanks for the great video. I was able to calibrate my cheap Alltrade micrometer using the technique you showed here.
Amazing camera work bud, totally didn't give me a stroke.
Did you not read the description? This was done 7 years ago with a go pro 🤷♂️
@@schuelfish I know, I was just joking around, sorry if that came out bad.
@@flodgey you got a laugh out me 👍
Thanks for sharing this video. I am taking some machining classes right now. Watching this video filled in some gaps I didn't understand when reading how to calibrate a mic.
Thanks a lot for upload this video, dear friend. I need this for calibrate a micrometer Mitutoyo.
Greetigns from Chile.
Thanks for the help! Needed to measure my cylinder and piston on a quadzilla 500 they were out beforehand.
Awesome!
Very good video regarding zero adjustment i like this technic. THANKS
W⭕W this was very helpful and helped me celebrate my fussy Xmas present mic...it was 3 microns out on the vernier with a very stiff sleeve. The thimble removed easy and I managed a good zero-line-reset. I collect quality mics, have about 15 of em, all B💥NG on accurate to the micron or 10thou.
I have one with the pointed spindle. One end is broken, how do I take it out and replace it?
great video
Is this also valid for Brown and Sharpe?
Yeah they are all pretty much the same.
Great to know,thank you….Bob
Our mic 0.25 positive err, Thankyou so much sir
Great job thank you
Great video. Thank you.
Great video thanks!
first step after using test peice is to doble check all faces clean . the check again . I seldom have had to adjust a micrometer despite the fact they are used often and often not treated well
Thank you.
Thank you very helpfull
Thanks
How to remove and correct 0.1 to 0.3 error in micrometer??? please tell me...
What kind are they?
0 - 25mm, 25 - 50mm, 50 - 100mm, 100 - 125mm (least count 0.01 and 0.001)
Help me setup a mic and get the thimble back to zero setting. Thanks
Very good & usefull vedio
thx
Благодаря!
thanks i fix my is working good
Tq useful msg
Great video
Thanks